8 7 6 4 5 3 REV - TITANIUM COMPATIBLE LASER WELDABLE MICRO-D CONNECTOR • TRADITIONAL CONFIGURATION WITH THE FLANGE LOCATED AT THE MIDSECTION OF THE CONNECTOR D 2 SRIMD102 DOCUMENT REVISIONS CHANGE NO. DATE INIT RLSE 10/01/2004 APPROVED /S/ DC A DCN000026 12/13/2004 /S/ DC B DCN000222 1/30/2007 J. PETRI C DCN000466 4/7/2009 • DESIGNED TO LASER WELD INTO AN ELECTRONIC CHASSIS WALL D • CONFORMS TO MIL-PRF-83513 AND ARE AVAILABLE IN 9, 15, 21, 25, 31, 37, 51, AND 100 COUNT PIN/SOCKET CONFIGURATIONS. • INCORPORATES BERYLLIUM-COPPER PIN/SOCKETS INDIVIDUALLY SEALED USING CERAMAX® PROPRIETARY CERAMIC TO ESTABLISH A DURABLE HERMETIC SEAL. • THE INTERNAL PINS CAN BE CONFIGURED TO ACCEPT INSULATED WIRE, AUTOMATIC WIRE BONDS, RIBBON WELDS, OR SOLDER CONNECTIONS. 1. LEAK RATE: LESS THAN OR EQUAL TO 1X10E-9 CC/SEC He AT ONE ATMOSPHERE DIFFERENTIAL PRESSURE. 2. INTERFACE AND MOUNTING HOLES IN ACCORDANCE WITH MIL-PRF-83513/2. C 3. MATERIALS: CONTACT: BERYLLIUM-COPPER ALLOY 172/173 IN ACCORDANCE WITH ASTM B196/197. INSULATOR: CERAMAX PROPRIETARY CERAMIC. WELD FLANGE: TITANIUMGR2 (UNALLOYED) IN ACCORDANCE WITH ASTM B265. INTERFACIAL SEAL: FLUOROSILICONE RUBBER PER MIL-R-25988, CLASS 1, TYPE II, GRADE 60. C C 4. FINISH: CONTACTS: NICKEL PLATE PER QQ-N-290, .000100 /.000250 THICK. GOLD PLATE PER ASTM B488, TYPE III, CODE A, .000050/.000100 THICK. PLATE ENTIRE EXPOSED PIN, BOTH ENDS. PLATING IN SOCKETS NOT REQUIRED BENEATH BLEED HOLE. SHELL: PASSIVATED. 5. ORDERING INSTRUCTIONS: SPECIFY BASE NUMBER FOLLOWED BY DASH NUMBERS INDICATING PIN COUNT AND CONFIGURATION (SEE SHEET 2+): EXAMPLE: SRIMD102 - 25 - A 1 DETAILED CONFIGURATION PIN END STYLE (SEE VIEW A) NUMBER OF CONTACTS, X B BASE NUMBER B UNLESS OTHERWISE SPECIFIED A DIMENSIONING IAW ASME Y14.5M-1994 DIMENSIONS APPLY AFTER PROCESSES DIMENSIONS IAW US CUSTOMARY UNITS .X .1, .XX .01, .XXX .005, .5 .010 MAX OUTSIDE R, .005 MAX INSIDE R 125 RMS SURFACE FINISH THIRD ANGLE PROJECTION SRI HERMETICS TITLE CONNECTOR, MICRO-D, MID-FLANGED, TITANIUM LASER WELDABLE SIZE DOCUMENT A SCALE FORM 300067 REV - 7 6 5 4 3 (321) 254-4067 WWW.SRIHERMETICS.COM 4:1 2 CAGE CODE SRIMD102 3PJY7 SHEET 1 REV C 1 OF 3 A 8 6 7 4 5 3 C 2 C W .002 C A .010 A .010 A .010 D SRIMD102 DOCUMENT B .010 B .010 B .010 D X .002 2XR C .010 INTERFACIAL SEAL C .010 D .010 100 PIN CONFIGURATION 51 PIN CONFIGURATION 9-37 PIN CONFIGURATIONS C C C PIN EXTENSIONS (SEE SH 3) .320 .003 MAX BRK .025±.002 WELD FLANGE .050 Y .001 INSULATOR (ONE PER CONTACT) .020±.002 .015 ALL AROUND CONTACT B VIEW A PIN END STYLE: A-STRAIGHT CUT B-STEPPED C-WIREBOND FLATS (SOLDERCUP SRIC101-1 AVAILABLE FOR WIRE ATTACH TO STRAIGHT Z .001 B .003 MAX BRK ALL AROUND 2XR HOLE DETAIL UNLESS OTHERWISE SPECIFIED A DIMENSIONING IAW ASME Y14.5M-1994 DIMENSIONS APPLY AFTER PROCESSES DIMENSIONS IAW US CUSTOMARY UNITS .X .1, .XX .01, .XXX .005, .5 .010 MAX OUTSIDE R, .005 MAX INSIDE R 125 RMS SURFACE FINISH THIRD ANGLE PROJECTION SRI HERMETICS TITLE 7 6 5 4 3 CONNECTOR, MICRO-D, MID-FLANGED, TITANIUM LASER WELDABLE SIZE DOCUMENT A SCALE FORM 300067 REV - (321) 254-4067 WWW.SRIHERMETICS.COM 3:1 2 CAGE CODE SRIMD102 3PJY7 SHEET 1 REV C 2 OF 3 A 8 6 7 STRAIGHT PIN END STYLE, A 4 5 3 STEPPED PIN END STYLE, B PIN EXTENSION A, B, C, D 2 SRIMD102 DOCUMENT WIREBOND FLAT PIN END STYLE, C PIN EXTENSION A, B, C, D PIN EXTENSION A, B, C, D D .012 .001 E +.010 FLAT .025 - .000 D .018 .001 .007 MIN THICK SR .018 MIN WIDE C C SRIMD102-X-A1 PIN END CONFIGURATION .040 .040 .040 .040 FLAT SRIMD102-X-A2 .075 .075 .075 .075 FLAT SRIMD102-X-A3 .118 .118 .118 .118 FLAT SRIMD102-X-A4 .200 .200 .200 .200 FLAT SRIMD102-X-A5 .180 .180 .180 .180 FLAT SRIMD102-X-A6 .155 .155 .155 .155 FLAT SRIMD102-X-A7 .219 .219 .219 .219 FULL RADIUS SRIMD102-X-A8 .500 .500 .500 .500 FLAT PART NUMBER B A B C PART NUMBER D A B C D PART NUMBER E SRIMD102-X-B1 .083 .083 .083 .083 .037 SRIMD102-X-B2 .080 .080 .080 .080 .060 SRIMD102-X-B3 .210 .210 .210 .210 .060 C D SRIMD102-X-C1 .110 .075 - - SRIMD102-X-C2 .110 .060 - - SRIMD102-X-C3 .110 .050 - - SRIMD102-X-C4 .100 .160 - - SRIMD102-X-C5 .050 .110 - - SRIMD102-X-C6 .110 .090 - - SRIMD102-X-C7 .080 .050 - - UNLESS OTHERWISE SPECIFIED DIMENSIONING IAW ASME Y14.5M-1994 DIMENSIONS APPLY AFTER PROCESSES DIMENSIONS IAW US CUSTOMARY UNITS .X .1, .XX .01, .XXX .005, .5 .010 MAX OUTSIDE R, .005 MAX INSIDE R 125 RMS SURFACE FINISH THIRD ANGLE PROJECTION SRI HERMETICS 6 5 4 3 (321) 254-4067 WWW.SRIHERMETICS.COM TITLE CONNECTOR, MICRO-D, MID-FLANGED, TITANIUM LASER WELDABLE SIZE DOCUMENT A SCALE 7 B B A FORM 300067 REV - A 3:1 2 CAGE CODE SRIMD102 3PJY7 SHEET 1 REV C 3 OF 3 A