HIGH REPEATABILITY BROADBAND CENTIGRID® RELAYS DPDT SERIES DESIGNATION RF100 RF103 RELAY TYPE RF100 Repeatable, RF, Centigrid® relay RF103 Sensitive, repeatable, RF, Centigrid® relay INTERNAL CONSTRUCTION PERFORMANCE FEATURES The ultraminiature RF100 and RF103 relays are designed to provide improved RF signal repeatability over the frequency range. These relays are highly UNI-FRAME UPPER STATIONARY CONTACT ARMATURE suitable for use in attenuator and other RF circuits, the RF100 and RF103 feature: MOVING CONTACT LOWER STATIONARY CONTACT • High repeatability. • Broader bandwidth. • Metal enclosure for EMI shielding. • Ground pin option to improve case grounding. • High isolation between control and signal paths. • Highly resistant to ESD. CONSTRUCTION FEATURES The following unique construction features and manufacturing techniques provide excellent resistance to environmental extremes and overall high reliability. ENVIRONMENTAL AND PHYSICAL SPECIFICATIONS –65°C to +125°C Temperature Storage (Ambient) Operating –55°C to +85°C Vibration (General Note 1) 10 g’s to 500 Hz Shock (General Note 1) 30 g’s, 6 msec, half-sine Enclosure rigidity. • Minimum mass components and welded construction provide maximum resistance to shock and vibration. • Advanced cleaning techniques provide maximum assurance of internal Hermetically sealed RF100 0.09 oz. (2.55g) max. RF103 0.16 oz. (4.5g) max. Weight RF100 RF103 Page 19 • Uni-frame motor design provides high magnetic efficiency and mechanical cleanliness. • Gold-plated precious metal alloy contacts ensure reliable switching. • Hermetically sealed. • Solderable leads. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE www.teledynerelays.com ©2003 TELEDYNE RELAYS RF100 RF103/1203/Q1 RF & MICROWAVE SERIES Isolation Pole to Pole (RF Note 5) -20 -20 -30 -30 Isolation (dB) Isolation (dB) Isolation Across Contacts (RF Note 4) -40 -40 -50 -50 -60 -60 0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 0 6000 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 Frequency (MHz) Frequency (MHz) VSWR (RF Note 6) Insertion Loss (RF Note 6) 0 3.00 -0.2 2.60 -0.4 -0.6 2.20 -0.8 VSWR Insertion Loss (dB) -1 1.80 -1.2 -1.4 1.40 -1.6 -1.8 0 1.00 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 0 6000 500 1000 1500 2000 Frequency (MHz) 2500 3000 3500 4000 4500 5000 5500 6000 Frequency (MHz) RF100 Time Response (RF Note 6) 1.1 0.9 90% 0.7 Volt RF & MICROWAVE SERIES RF100 AND RF103 TYPICAL RF CHARACTERISTICS (See RF Notes) 37ps reference 0.5 81.1ps propagation delay time 0.3 58.1ps pulse rise time 10% 0.1 -0.1 -100 0 100 200 300 400 500 600 700 800 900 Time (ps) RF NOTES 1. Test conditions: 2. 3. 4. 5. 6. 7. a. Fixture: .031" copper clad, reinforced PTFE, RT/duroid® 6002 with SMA connectors. (RT/duroid® is a registered trademark of Rogers Corporation.) b. Room ambient temperature. c. Terminals not tested were terminated with 50-ohm load. d. Contact signal level: –10 dBm. e. No. of test samples: 2. Data presented herein represents typical characteristics and is not intended for use as specification limits. Data is per pole, except for pole-to-pole data. Data is the average from readings taken on all open contacts. Data is the average from readings taken on poles with coil energized and de-energized. Data is the average from readings taken on all closed contacts. Test fixture effect de-embedded from frequency and time response data. ©2003 TELEDYNE RELAYS SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE www.teledynerelays.com RF100 RF103 Page 20 RF100 RF103/1203/Q1 RF & MICROWAVE TYPICAL RF INSERTION LOSS REPEATABILITY CHARACTERISTICS (NOTES 1 AND 2) SERIES RF100 AND RF103 REPEATABILITY CHARACTERISTICS RF100 RELAYS 90 80 70 60 50 40 30 20 10 0 0.02 0.04 0.06 0.08 0.10 0.12 0.14 0.16 0.18 0.20 Normally Open % Total Number Recorded Test Cycles % Total Number Recorded Test Cycles Normally Closed 100 100 90 80 70 60 50 40 30 20 10 0 0.02 0.04 0.06 0.08 0.10 0.12 0.14 0.16 0.18 0.20 Repeatability (dB) Repeatability (dB) REPEATABILITY CHARACTERISTICS RF103 RELAYS 100 90 80 70 60 50 40 30 20 10 0 0.02 0.04 0.06 0.08 0.10 0.12 0.14 0.16 0.18 0.20 Repeatability (dB) Normally Open % Total Number Recorded Test Cycles % Total Number Recorded Test Cycles Normally Closed 100 90 80 70 60 50 40 30 20 10 0 0.02 0.04 0.06 0.08 0.10 0.12 0.14 0.16 0.18 0.20 Repeatability (dB) RF INSERTION LOSS REPEATABILITY NOTES 1. Test conditions: a. Fixture: .031" copper clad, reinforced PTFE, RT/duroid® 6002 with SMA connectors. (RT/duroid® is a registered trademark of Rogers Corporation.) b. Relay header is in contact with, but not soldered to, ground plane or connected to ground via ground pin. c. Test performed at room ambient temperature. d. Contact signal level: 20 dBm. 2. Data presented herein represents typical characteristics and is not intended for use as specification limits. 3. Insertion loss repeatability measured over frequency range from .3 MHz to 4 GHz. RF100 RF103 Page 21 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE www.teledynerelays.com ©2003 TELEDYNE RELAYS RF100 RF103/1203/Q1 RF & MICROWAVE SERIES RF100 AND RF103 GENERAL ELECTRICAL SPECIFICATIONS (@25°C) Contact arrangement DPDT Rated duty Continuous Contact resistance .100 ohm max. initial (measured 1/8" from the header) Contact load rating Low level: 10 to 50 µA, 10 to 50 mV Contact life rating 10,000,000 cycles typical at low level RF100: 369–500 mW typical @ nominal rated voltage RF103: 180–250 mW typical @ nominal rated voltage Coil operating power Operate time Release time RF100 4.0 ms. max. RF103 6.0 ms. max. RF100 3.0 ms. max. RF103 3.0 ms. max. Intercontact capacitance 0.4 pF typical Insulation resistance 1,000 MΩ min. (between mutually isolated terminals) Dielectric strength 350 VRMS / 60 Hz @ atmospheric pressure DETAILED ELECTRICAL SPECIFICATIONS (@25°C) RF100-5 RF103-5 RF100-12 RF103-12 5.0 12.0 RF100 50 390 RF103 100 800 3.6 9.0 BASE PART NUMBERS Coil voltage, nominal, VDC Coil resistance, ohms ± 20% Pick-up voltage max, VDC OUTLINE DIMENSIONS .031 (.79) REF. .375 (9.53) SQ. MAX. .335 (8.51) SQ. MAX. 7 8 .035 (.89) REF. 2 6 5 1 4 H DIMENSION MAX. 0.100 0.010 (2.54 0.25) H 3 TERMINAL NUMBERING SCHEMATIC • TERMINAL NUMBERING AND SCHEMATIC ARE AS VIEWED FROM THE TERMINALS. • DIMENSIONS ARE IN INCHES (MILLIMETERS). • SCHEMATIC AND EXTERNAL DIMENSIONS SHOWN WITHOUT GROUND PINS. • TO ORDER THE CASE GROUND OPTION, AFTER THE SERIES DESIGNATOR, ADD “Y” TO THE PART NUMBER FOR TAB POSITION OR “Z” TO THE PART NUMBER FOR CENTER POSITION. EXAMPLE: RF103Y-COIL VOLTAGE RF100 .290 (7.37) RF103 .395 (10.03) .75 (19.05) MIN. +.002 .017 -.001 +.05 (.43 -.03 ) EXTERNAL DIMENSIONS GENERAL NOTES 1. Relays will exhibit no contact chatter in excess of 10 µsec or transfer in excess of 1 µsec. ©2003 TELEDYNE RELAYS SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE www.teledynerelays.com RF100 RF103 Page 22 RF100 RF103/1203/Q1