8 7 6 5 4 3 2 TITANIUM COMPATIBLE LASER WELDABLE 50 OHM FEEDTHROUGH SMPM ADAPTABLE, .012 DIAMETER CENTER CONTACT, PRESS-IN REV SRIFT1012 DOCUMENT REVISIONS CHANGE NO. DATE CFG APPROVAL - INIT RLSE 2013-05-29 J. PETRI A DCN001243 11/6/2013 • CONFIGURATION FOR INTERFACING TO SMPM "BULLET" STYLE ADAPTER D • DESIGNED TO LASER WELD INTO AN ELECTRONIC CHASSIS D • INDUSTRY STANDARD NICKEL-IRON-COBALT ALLOY CONTACT WITH CORNING 7070 EQUIVALENT GLASS • RF GROUNDING SPRING FOR EXCELLENT PERFORMANCE OVER TEMPERATURE 1. LEAK RATE: LESS THAN OR EQUAL TO 1X10E-9 CC/SEC He AT ONE ATMOSPHERE DIFFERENTIAL PRESSURE. 2. NOMINAL IMPEDANCE: 50 OHMS 3. INTERFACE IN ACCORDANCE WITH MIL-STD-348, SMPM. 4. MATERIALS: PIN: NICKEL-IRON-COBALT ALLOY IN ACCORDANCE WITH ASTM F15. DIELECTRIC: CORNING 7070 EQUIVALENT GLASS (MATCHED SEAL). SHELL (WELD FLANGE): TITANIUM UNALLOYED GRADE 2 IN ACCORDANCE WITH ASTM B265 OR B348. RF GROUNDING SPRING: BERYLLIUM-COPPER ALLOY 172/173 IN ACCORDANCE WITH ASTM B 194 (NICKEL/GOLD PLATE). C 5. FINISH: PIN: NICKEL PLATE PER QQ-N-290, CLASS 2, .000100/.000250 THICK. GOLD PLATE PER ASTM B488, TYPE III, CODE A, .000050/.000100 THICK. C GROUNDING SPRING: NICKEL PLATE PER QQ-N-290, CLASS 2, .000100/.000250 THICK. GOLD PLATE PER ASTM B488, TYPE III, CODE A, .000030/.000050 THICK. SHELL (EXCEPT WELD AREA): ELECTROLESS NICKEL PER ASTM B733, .000200/.000300 THICK. GOLD PLATE PER ASTM B488, TYPE III, CODE A, .000050/.000150 THICK. WELD AREA: NONE. 6. ORDERING INSTRUCTIONS: SPECIFY BASE NUMBER FOLLOWED BY DASH NUMBER INDICATING DETENT TYPE, PIN EXTENSION, AND DIELECTRIC APPLICATION TYPE: A EXAMPLE: SRIFT1012 - FD 130 A DIELECTRIC APPLICATION TYPE (A-AIR, T-TEFLON) PIN EXTENSION (L) DETENT TYPE (FD -FULL, SB - SMOOTH) BASE NUMBER B B VIEWS SHOWN WITHOUT GROUNDING SPRING UNLESS OTHERWISE SPECIFIED A DIMENSIONING IAW ASME Y14.5M-1994 DIMENSIONS APPLY AFTER PROCESSES DIMENSIONS IAW US CUSTOMARY UNITS .X .1, .XX .01, .XXX .005, .5 .010 MAX OUTSIDE R, .005 MAX INSIDE R 125 RMS SURFACE FINISH THIRD ANGLE PROJECTION SRI HERMETICS TITLE FEEDTHROUGH, SMPM, TITANIUM LASER WELDABLE, PRESS-IN SIZE DOCUMENT A SCALE FORM 300067 REV - 7 6 5 4 3 (321) 254-4067 WWW.SRIHERMETICS.COM 8:1 2 CAGE CODE SRIFT1012 3PJY7 SHEET 1 REV A 1 OF 2 A 8 6 7 4 5 3 2 SRIFT1012 DOCUMENT D D L±.003 .140 .012±.001 .152 MAX OVER KNURL DETENT PIN .057±.002 FERRULE WELD FLANGE C STRAIGHT KNURL VIEW SHOWN WITHOUT RF GROUNDING SPRING SHELL C INSTALL THIS DIRECTION .139±.002 8X 45° .028 .001 THRU (AIR DIELECTRIC) .039 .001 SHOWN (PTFE DIELECTRIC) .053 .002 X 90 (PTFE DIELECTRIC ONLY) .142 .001 SHOWN .148 .001 SHOWN AS SHOWN .005±.002 B .028 (AIR DIELECTRIC APPLICATION) .040 (TEFLON DIELECTRIC APPLICATION) .135±.001 .030 MIN .003 MAX BRK .0020±.0005 8X .008 AS REQUIRED .070±.002 B RF GROUNDING SPRING, SHIPPED UNINSTALLED PART NUMBER SRIFT1012-GS1, AIR DIELECTRIC PART NUMBER SRIFT1012-GS2, TEFLON DIELECTRIC O O NO PLATING UNLESS OTHERWISE SPECIFIED A DIMENSIONING IAW ASME Y14.5M-1994 DIMENSIONS APPLY AFTER PROCESSES DIMENSIONS IAW US CUSTOMARY UNITS .X .1, .XX .01, .XXX .005, .5 .010 MAX OUTSIDE R, .005 MAX INSIDE R 125 RMS SURFACE FINISH THIRD ANGLE PROJECTION SUGGESTED HOLE DETAIL FORM 300067 REV - 7 6 SRI HERMETICS TITLE FEEDTHROUGH, SMPM COMPATIBLE, ALUMINUM LASER WELDABLE SIZE DOCUMENT A SCALE 5 4 3 (321) 254-4067 WWW.SRIHERMETICS.COM 8:1 2 CAGE CODE SRIFT1012 3PJY7 SHEET 1 REV A 2 OF 2 A