UNMANNED SYSTEMS Analog Devices provides modern high performance solutions focused on the aerial, terrestrial, and marine unmanned platforms built upon our portfolio of robust and reliable products matched with our system-level capabilities and knowledge. Visit analog.com/adef AVDD XX Circuits supporting time of flight (TOF) and visual processing calculations XX Chipsets to support electronic surveillance, IFF systems, and civilian transponder/ADS-B requirements XX ATEST High power amplifiers, upconverters, and modules to support mission critical applications CLK DATA RX4_RF Balun Balun Balun Balun LNA LNA LNA LNA 32-Bit Data Register LE RX1B_P, RX1B_N Communications XX Temp Sensor CE RX3_RF RX1A_P, RX1A_N Low power and frequency agile integrated transceivers for flight management and telemetry XX Solutions to support long range data links, airborne repeaters, and frequency hopping for secure communications XX Satellite communications components and modules RX1C_P, RX1C_N RX2B_P, RX2B_N ADC RX2C_P, RX2C_N DOUT Rx LO TX_MON1 Tx LO TX1A_P, TX1A_N Balun LO_IN XX ADC RX2A_P, RX2A_N Visit analog.com Airframe and Power AD9361 DAC High temperature systems for full authority digital engine controllers (FADECs) XX Flight control sensing and measuring via linear variable differential transformers (LVDTs) and related devices XX RX4_O SPI CTRL Voltage Reference Internal Clock Generator Inputs From Resolver Motor control and isolation circuits for interfacing to physical control surfaces ADC Position Register Encoder Emulation CTRL Fault Detection Outputs Fault Detection Type II Tracking Loop ADC Velocity Register Multiplexer DAC TX2B_P, TX2B_N RX4_OB RX3_O RX3_OB RX2_O RX2_OB RX1_O RX1_OB GND Reference Oscillator (DAC) Encoder Emulation Outputs TX2A_P, TX2A_N Crystal Synthetic Reference TX_MON2 ADF5904 Reference Pins AD2S1205 Excitation Outputs XX P0_[D11:D0]/ TX_[D5:D0] P1_[D11:D0]/ RX_[D5:D0] Electric power management and conditioning systems TX1B_P, TX1B_N DAC 24+ GHz radar object detection and collision avoidance RX2_RF DAC XX RX1_RF ADC Safety and Surveillance Data Interface Unmanned Systems Data Bus Output GPO Radio Switching PLLs CLK_OUT Data I/O Reset AUXADC AUXDACx XTALP XTALN High Performance Components Notes 1. SPI, CTRL, P0_[D11:D0]/TX_[D5:D0], P1_[D11:D0]/RX_[D5:D0], and Radio Switching Contain Multiple Pins. XXExpanded temperature range components: –55°C up to +175°C XXEnhanced performance screening and components XXSpace XXMany grade components and modules components are based on and manufactured to the MIL-STD-883 standard Air Data Attitude Heading Reference Systems (ADAHRS) XX Advanced gyroscopes and accelerometers based on microelectomechanical systems (MEMS) digital signal processors (DSPs) XX Magnetic and temperature sensors along with converters and digital signal processors for interfacing to external analog sensors Payloads and Data and Video Processing Integrated inertial measurement unit (IMU) systems—iSensor® (6 axes to 10 axes) Neutral Phase A Phase B Phase C XX Payload stabilization and pointing— accelerometers and gyroscopes with control technology XX Precision analog-to-digital converters for a wide array of sensors—electronic and signal intelligence gathering XX Ultrahigh speed analog-to-digital and digital-to-analog data converters XX XX Laser detection converters to support targeting and acquisition systems Video and image processing with transmission—digital signal processors, RF mixers, and video encoders Isolation Barrier 3.3 V V1P VM I/O Alarms Power Management Triaxial Gyro GND V2P GNDISO_A Triaxial Accel Controller Triaxial MAGN Calibration Extended Kalman Filter Output Data Registers Digital Filtering CS SPI User Control Registers Pressure Temp IP IM DIN IP DOUT 3.3 V Phase B ADE7912/ ADE7913 GNDISO_B GNDMCU 3.3 V V1P VM IM IP Connectorized Modules Phase C ADE7912/ ADE7913 GNDISO_C XX XX Precision components enabling the use of airframe sensors such as LVDT, RVDT, and strain gages to assess vehicle conditions GNDMCU Neutral Line IM ADE7912/ ADE7913 (Optional) IP V2P GNDISO_N Earth Video Data SDA VBI Data Service Insertion 4:2:2 to 4:4:4 SD Deinterleave G/B 8-/16-/24-Bit ED/HD 3.3 V VM Load 8-/16-/24-Bit SD GNDMCU V1P Vibration sensors, isolators, and data converters to support on-board real-time health utilization monitoring systems (HUMS) GND_IO R V2P Vehicle Health SCL ALSB AGND SFL VAA Video Data RGB to YCrCb Matrix RGB ASYNC Bypass YCbCr SDR/DDR ED/HD INPUT 4:2:2 to 4:4:4 Deinterleave Power Management Control HDTV Test Pattern Generator ADV7342/ADV7343 Subcarrier Frequency Lock (SFL) MPU Port VDD_IO V2P ADIS16480 VDD (2) 3.3 V VM SCLK VDDRTC ADI offers a large portfolio of standardized modules that help simplify and speed your time to market. ADI also offers customized modules for those designs that require additional performance. No matter your design needs, ADI has a solution for you. DGND (2) GNDMCU V1P Clock VDD Phase A ADE7912/ ADE7913 System Microcontroller Self-Test IM VDD SPI Interface DIO1 DIO2 DIO3 DIO4 RST Add Sync Programmable Luminance Filter YCrCb to RGB Add Burst Programmable Chrominance Filter Sin/Cos DDS Block 16× Filter 16× Filter RGB Programmable HDTV Filters Sharpness and Adaptive Filter Control YCbCr to RGB Matrix Video Timing Generator Multiplexer XX 4× Filter 16×/4× Oversampling DAC PLL 11-Bit DAC 1 DAC 1 11-Bit DAC 2 DAC 2 11-Bit DAC 3 DAC 3 11-Bit DAC 4 DAC 4 11-Bit DAC 5 DAC 5 11-Bit DAC 6 DAC 6 Reference and Cable Detect GNDMCU P_HSYNC P_VSYNC P_BLANK S_HSYNC S_VSYNC CLKIN (2) PVDD PGND EXT_LF (2) VREF COMP (2) RSET (2) Advanced Support For Unmanned Systems Enhanced Products (EP) Products from Analog Devices’ EP process can be qualified over the temperature range of –55°C to +125°C. EP products support NiPdAu lead finish and support STD-883 standards. All EP devices have separate data sheets along with a controlled manufacturing baseline— some products can be qualified up to +175°C. Die Products ADI understands the need of our customers to purchase bare die for some specific applications and presently sells these products to meet our customers’ needs. DO 178 B/C and DO 254 Support Analog Devices recognizes the need to support DO 178 B/C and DO 254 processes to support our customers certification. ADI can provide the correct artifacts and processes to support complex components and software. Customized Solutions and System in Package (SiP) System in package solutions provide reduced size and increase integration to optimize system performance and footprint. Using ADI’s broad portfolio of die, advanced integrated solutions can be created for a wide and diverse range of applications. Integrated Assemblies: Design and Production ADI designs and manufactures high performance miniature subsystems for high reliability applications utilizing ADI’s expertise in system analysis, MMIC and module design, mechanical packaging, automated manufacturing, RF testing, screening, and qualification. The majority of MMIC chips are ADI products that drive significant benefits in controlling performance, schedule, screening, qualification, packaging, and design optimization. Material Declaration RoHS Compliance Restriction of Hazardous Substances (RoHS) regulations restrict the use of four heavy metals (lead, mercury, cadmium, and hexavalent chromium) and two brominated flame retardants (polybrominated diphenyl ethers and polybrominated biphenyls) in electrical and electronic devices. ADI provides products that allow our customers to be compliant with RoHS regulations. For more information on ADI’s RoHS compliance program, see Analog Devices RoHS Compliance Information (pdf). Analog Devices evaluation boards are specifically designed solely for the purpose of research and development and are made available solely on a business-to-business basis and therefore are excluded from the scope of the RoHS 2 Directive. Export Classifications ADI is committed to maintaining full compliance with all U.S. and other national government export laws and regulations. In the U.S., ADI is subject to the U.S. Export Administration Regulations (U.S. EAR) for export and re-export of dual use items (these regulations are administered by the U.S. Department of Commerce). ADI is also subject to International Traffic in Arms Regulations (ITAR) for export and re-export of Defense Articles and Defense Services (these regulations are administered by the U.S. State Department). ADI’s ITAR registration number is M-2477. Visit analog.com/adef to see the entire line of Analog Devices components focused on the aerospace and defense industry. Three Ways to Stay Connected EUROPE ASIA NORTH AMERICA AFRICA AUSTRALIA Contact the ADI sales team. Join the EngineerZone support community. Analog Devices, Inc. Worldwide Headquarters Analog Devices, Inc. Europe Headquarters Analog Devices, Inc. Japan Headquarters Analog Devices, Inc. Asia Pacific Headquarters Analog Devices, Inc. One Technology Way P.O. Box 9106 Norwood, MA 02062-9106 U.S.A. Tel: 781.329.4700 (800.262.5643, U.S.A. only) Fax: 781.461.3113 Analog Devices, Inc. Wilhelm-Wagenfeld-Str. 6 80807 Munich Germany Tel: 49.89.76903.0 Fax: 49.89.76903.157 Analog Devices, KK New Pier Takeshiba South Tower Building 1-16-1 Kaigan, Minato-ku, Tokyo, 105-6891 Japan Tel: 813.5402.8200 Fax: 813.5402.1064 Analog Devices 5F, Sandhill Plaza 2290 Zuchongzhi Road Zhangjiang Hi-Tech Park Pudong New District Shanghai, China 201203 Tel: 86.21.2320.8000 Fax: 86.21.2320.8222 Subscribe to our eNewsletter. ©2016 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. Ahead of What’s Possible is a trademark of Analog Devices. Printed in the U.S.A. BR14112-.3-4/16 analog.com/adef