Display box, 2-channel DDBF 2-SC Features • 2-channel display box for strain rings DSRC • Measurement value of each sensor, Average and peak value of both sensors • Bending measurement by individual S/G display • A/C or Battery operation • Display in µe, kN, t • 2 analog outputs • Reset with keypad or InspectMaster Order Code Electrical Data Connection 2 channels for 2 x 1/4 S/G bridge (350 Ω) Display Sensor A or B peak value, average value Delivery Contents Measuring range ±1000 µε (calibrated) Resolution 1 µε • Display box Characteristic curve deviation < 0,25% FS Reset/operate offset < ±0,1% FS Bridge completion resistors Rc 350 Ω Reset Zeroing is performed by pressing the reset button or by the software InspectMaster Measuring rate InspectMaster/ analog output 250/sec Analog output ±1 V calibrated at ±1000 µε Display refresh rate 2/sec Battery Maintenance-free Li-Ion battery USB connection USB 2.0, type B DDBF 2-SC • Power adapter (100 - 240 VAC) • Software InspectMaster • USB connecting cable • Ground connection cable with clip Mechanical Data Sensor connection 4 pin Binder (series 712) Enclosure Aluminum, lacquered Environmental Conditions Operating temp. range +5...+50 °C Storage temperature -20...+60 °C Protection class IP 40 7.4 www.baumer.com 3 DDBF 2-SC 110 35 Analog OUT1 Analog OUT2 CH A CH D Error DDBF RESET disable Analog OUT2 F1 Analog OUT1 CH C F3 Esc ON/OFF CH D Enter Prog. 35 CH B F2 CH A CH B 100 CH A 212 View Connector Side 110 Analog OUT2 CH C Displa ybox Dimensions (mm) Analog OUT1 CH B RESET 110 View Bottom Side, under the top cover Displa ybox Error 85 RESET disable 212 DDBF Analog OUT1 Analog OUT2 CH A USB-Connection F2 CH C CH D F3 Esc Enter Prog. Display batteryError chargeDDBF status RESET RESET Displa ybox disable 212 ON/OFF 100 F1 CH B Connection for power adapter, 15-33 VDC 85 F1 Electrical Connections 3 1 4 F3 Esc S/G Bridge Pin Signal 1 S/G 1 EXC,+ 2 S/G 1 SIG.- 3 S/G 2 EXC.+ 4 S/G 2 SIG.- DMS 1 / S/G 1 100 ON/OFF Sensor connection 2 F2 Enter Prog. DDBF RESET EXC.+ 1 R 2 7 85 R DMS 2 / S/G 2 R EXC.+ 3 R 4 R R Pro Kanal / Per channel Analysis Software InspectMaster Functions: -Display in µe, N, kN, t -Display of deviation of tie bar load distribution in % -Cycle function with auto reset mode -Display of graphs -Saving of measured data -Export function (Text file may be exported and processed in Excel) Requirements: -PC with Windows, 2000, NT, XP minimum 500 MHz and USB interface required www.baumer.com 7.5