Display box, 4-channel DDBF 4-SC Features • 4-channel display box for strain rings DSRC • Contemporaneous measurement and display of 4 channels • A/C or Battery operation • Display in µe, kN, t • 2 analog outputs • Reset with keypad or InspectMaster Order Code Electrical Data Connection 4 channels for 2 x 1/4 S/G bridge (350 Ω) DDBF 4-SC Display Average / peak value or sum / peak value of the activated channels Delivery Contents Measuring range ±1000 µe (calibrated) Resolution 1 µe Characteristic curve deviation < 0,25% FS Reset/operate offset < ±0,1% FS Bridge completion resistors Rc 350 Ω Reset Zeroing is performed by pressing the reset button or by the software InspectMaster Measuring rate InspectMaster/ analog output 250/sec Analog output ±1 V calibrated at ±1000 µe Display refresh rate 2/sec Battery Maintenance-free Li-Ion battery USB connection USB 2.0, type B • Display box • Power adapter (100 - 240 VAC) • Software InspectMaster • USB connecting cable • Ground connection cable with clip Mechanical Data Sensor connection 4 pin Binder (series 712) Enclosure Aluminum, lacquered Environmental Conditions Operating temp. range +5...+50 °C Storage temperature -20...+60 °C Protection class IP 40 7.6 www.baumer.com 3 DDBF 4-SC 110 35 Analog OUT1 Analog OUT2 CH A CH D Error DDBF RESET disable Analog OUT2 CH A F1 Analog OUT1 CH C CH C F3 CH B CH D Esc ON/OFF CH D Enter Prog. 35 CH B F2 100 CH A 212 View Connector Side 110 Analog OUT2 CH C Displa ybox Dimensions (mm) Analog OUT1 CH B RESET 110 View Bottom Side, under the top cover Displa ybox Error 85 RESET disable 212 DDBF Analog OUT1 Analog OUT2 CH A USB-Connection F2 CH C CH D F3 Esc ON/OFF 100 F1 CH B Connection for power adapter, 15-33 VDC Enter Prog. Display battery Error chargeDDBF status RESET RESET Displa ybox 212 disable 85 F1 Electrical Connections F2 100 Bridge configuration Enter per connector Prog. Pin 3 1 4 Esc ON/OFF Sensor connection 2 F3 Signal 1 S/G 1 EXC,+ 2 S/G 1 SIG.- 3 S/G 2 SIG.+ 4 S/G 2 EXC.- DMS 1 / S/G 1 DDBF RESET EXC.+ 1 R 2 7 85 R DMS 2 / S/G 2 3 4 Pro Kanal / Per channel Analysis Software InspectMaster Functions: - Display in µe, N, kN, t - Display of deviation of tie bar load distribution in % - Cycle function with auto reset mode - Display of graphs - Saving of measured data - Export function (Text file may be exported and processed in Excel) Requirements: - PC with Windows, 2000, NT, XP minimum 500 MHz and USB interface required www.baumer.com 7.7