74LVC14A

74LVC14A
HEX INVERTERS WITH SCHMITT TRIGGER INPUTS
Description
Pin Assignments
The 74LVC14A provides six independent schmitt trigger inverter
buffers. The device is designed for operation with a power supply
range of 1.65V to 5.5V. The inputs are tolerant to 5.5V allowing this
device to be used in a mixed voltage environment. The device is fully
specified for partial power down applications using IOFF. The IOFF
circuitry disables the output preventing damaging current backflow
when the device is powered down.
The gates perform the positive Boolean function:
Y=A
Features
•
Wide Supply Voltage Range from 1.65V to 5.5V
•
Outputs sink or source 24mA at VCC = 3.3V
•
CMOS low power consumption
•
IOFF Supports Partial-Power-Down Mode Operation
•
Inputs or outputs accept up to 5.5V
•
Inputs can be driven by 3.3 V or 5.5V allowing for voltage
translation applications.
•
ESD Protection Exceeds JESD 22
ƒ
200-V Machine Model (A115-A)
ƒ
2000-V Human Body Model (A114-A)
ƒ
Exceeds 1000-V Charged Device Model (C101C)
•
Latch-Up Exceeds 250mA per JESD 78, Class II
•
Range of Package Options SO-14 and TSSOP-14
•
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
•
Halogen and Antimony Free. “Green” Device (Note 3) Applications
•
Voltage Level Shifting
•
General Purpose Logic
•
Power Down Signal Isolation
•
Wide array of products such as:
ƒ
PCs, networking, notebooks, ultrabooks, netbooks
ƒ
Computer peripherals, hard drives, CD/DVD ROM
ƒ
TV, DVD, DVR, set top box
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
74LVC14A
Document number: DS35262 Rev. 3 - 2
1 of 10
www.diodes.com
July 2012
© Diodes Incorporated
74LVC14A
Pin Descriptions
Pin Number
Pin Name
Description
1
1A
2
1Y
Data Output
3
2A
Data Input
Data Input
4
2Y
Data Output
5
3A
Data Input
6
3Y
Data Output
7
GND
8
4Y
Data Output
Data Input
Ground
9
4A
10
5Y
Data Output
11
5A
Data Input
12
6Y
Data Output
13
6A
Data Input
14
VCC
Supply Voltage
Logic Diagram
1A
2A
3A
4A
5A
6A
1
2
3
4
5
6
9
8
11
10
13
12
1Y
2Y
3Y
4Y
5Y
6Y
Function Table
Inputs
A
Outputs
Y
H
L
L
H
74LVC14A
Document number: DS35262 Rev. 3 - 2
2 of 10
www.diodes.com
July 2012
© Diodes Incorporated
74LVC14A
Absolute Maximum Ratings (Note 4) (@TA = +25°C, unless otherwise specified.)
Symbol
ESD HBM
ESD CDM
Description
Human Body Model ESD Protection
Unit
2
KV
1
KV
200
V
Supply Voltage Range
-0.5 to 6.5
V
VI
Input Voltage Range
-0.5 to 6.5
V
VO
Voltage applied to output in high impedance or IOFF state
-0.5 to 6.5
V
ESD MM
VCC
Charged Device Model ESD Protection
Rating
Machine Model ESD Protection
VO
-0.3 to VCC +0.5
Voltage applied to output in high or low state
IIK
Input Clamp Current
V
VI < 0
-50
mA
IOK
Output Clamp Current
VO < 0
-50
mA
IO
Continuous output current
50
mA
±100
mA
Operating Junction Temperature
-40 to +150
°C
TSTG
Storage Temperature
-65 to +150
°C
PTOT
Total Power Dissipation
500
mW
Continuous current through VDD or GND
TJ
Note:
4. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device operation should
be within recommend values.
Recommended Operating Conditions (Note 5) (@TA = +25°C, unless otherwise specified.)
Symbol
VCC
Note:
Parameter
Conditions
Min
Max
Unit
1.65
5.5
V
0
5.5
V
Active Mode
0
VCC
V
VCC = 0V; Power Down Mode
0
5.5
V
-40
+125
ºC
Supply Voltage
VI
Input Voltage
VO
Output Voltage
TA
Operating free-air temperature
5. Unused inputs should be held at VCC or Ground.
74LVC14A
Document number: DS35262 Rev. 3 - 2
3 of 10
www.diodes.com
July 2012
© Diodes Incorporated
74LVC14A
Electrical Characteristics (@TA = +25°C, unless otherwise specified.)
Symbol
VT+
VT-
VH
Parameter
Test Conditions
Positive Going
Threshold
Negative Going
Threshold
Hysteresis
(VT+ - VT-)
High Level
Output Voltage
High-level
Output Voltage
Input Current
Min
Max
Min
Max
2.5V
0.9
1.7
0.9
1.7
2.7V
1.1
2.0
1.1
2.0
2.7V to 3.6V
1.1
2.0
1.1
2.0
2.5V
0.4
1.2
0.4
1.2
2.7V
0.8
1.5
0.8
1.5
2.7V to 3.6V
0.8
1.5
0.8
1.5
2.5V
0.3
0.2
2.7V
0.3
0.3
0.3
0.3
VCC – 0.2
VCC – 0.3
IOH = -4mA
1.65V
1.2
IOH = -8mA
2.3V
1.9
2.7V
2.2
2.05
3.0V
2.3
2.1
IOH = -24mA
3.0V
2.2
2.0
IOH = 100μA
1.65V to 5.5V
Unit
V
V
V
0.2
0.3
IOH = 4mA
1.65V
0.45
0.6
IOH = 8mA
2.3V
0.70
0.85
2.7V
0.40
0.6
IOH = 12mA
II
TA = -40°C to +125°C
2.7V to 3.6V
IOH = -12mA
VOL
TA = -40°C to +85°C
1.65V to 3.6V
IOH = -100μA
VOH
VCC
V
3.0V
0.55
0.6
IOH =-24 mA
3.0V
0.55
0.6
VI =GND to 5.5V
3.6V
±5
± 20
μA
0
10
20
μA
3.6V
10
40
μA
2.7V to 3.6V
500
5000
μA
Power Down
IOFF
Leakage
Current
ICC
Supply Current
ΔICC
Additional
Supply Current
VI or VO = 0V to 3.6V
VI = GND or
VCC IO=0
One input at VCC –0.6 V
Other
74LVC14A
Document number: DS35262 Rev. 3 - 2
4 of 10
www.diodes.com
July 2012
© Diodes Incorporated
74LVC14A
Switching Characteristics
Symbol
Parameter
tPD
Propagation
Delay AN to YN
tSK(0)
Output Skew
Time
Test
Conditions
VCC
Figure 1
1.65V to1.95V
2.3V to 2.7V
2.7V
3V to 3.6V
TA = +25°C
Min Typ Max
0.5
0.5
0.5
0.5
4.1
3.6
3.0
2.5
-40°C to +85°C
Min
Max
8.9
7.0
5.3
4.8
0.5
0.5
0.5
0.5
3V to 3.6V
8.9
7.5
5.5
4.8
-40°C to +125°C
Min
Max
0.5
0.5
0.5
0.5
1.0
Unit
9.5
9.0
7.0
6.0
ns
1.5
ns
Operating Characteristics (@TA = +25°C, unless otherwise specified.)
Parameter
Power dissipation
capacitance per gate
Cpd
CI
Input Capacitance
Test
Conditions
VCC = 1.8V
Typ
VCC = 2.5V
Typ
VCC = 3.3V
Typ
VCC = 5V
Typ
Unit
f = 10MHz
7.0
7.5
8.0
8.6
pF
4
4
4
4
pF
Vi = VCC – or
GND
Package Characteristics
Symbol
Note:
Parameter
Test Conditions
θJA
Thermal Resistance
Junction-to-Ambient
SO-14
θJC
Thermal Resistance
Junction-to-Case
SO-14
TSSOP-14
TSSOP-14
VCC
(Note 6)
(Note 6)
Min
Typ
TBD
Max
Unit
o
C/W
159
TBD
o
C/W
25
6. Test condition for SO-14 and TSSOP-14: Device mounted on FR-4 substrate PC board, 2oz copper, with minimum recommended pad layout.
74LVC14A
Document number: DS35262 Rev. 3 - 2
5 of 10
www.diodes.com
July 2012
© Diodes Incorporated
74LVC14A
Parameter Measuement Information
VCC
Inputs
VM
CL
≤2ns
VCC/2
30pF
1KΩ
≤2ns
VCC/2
30pF
500Ω
VI
tr/tf
1.8V±0.15V
VCC
2.5V±0.2V
VCC
RL
3.3V±0.3V
3V
≤2.5ns
1.5V
50pF
500Ω
5V±0.5V
VCC
≤2.5ns
VCC/2
50pF
500Ω
Voltage Waveform
Pulse Duration
Voltage Waveform
Propagation Delay Times
Inverting and Non Inverting Outputs
Notes: A . Includes test lead and test apparatus capacitance.
B. All pulses are supplied at pulse repetition rate ≤ 10 MHz
C. Inputs are measured separately one transition per measurement
D. tPLH and tPHL are the same as tPD
Figure 1. Load Circuit and Voltage Waveforms
74LVC14A
Document number: DS35262 Rev. 3 - 2
6 of 10
www.diodes.com
July 2012
© Diodes Incorporated
74LVC14A
Ordering Information
Quantity
Part Number Suffix
S14
SO-14
2500/Tape & Reel
-13
T14
TSSOP-14
2500/Tape & Reel
-13
Package
Code
74LVC14AS14-13
74LVC14AT14-13
Notes:
13” Tape and Reel
Packaging
(Note 7)
Device
7. The taping orientation and tape details can be found at http://www.diodes.com/datasheets/ap02007.pdf
Marking Information
(1) SO-14 , TSSOP-14
( Top View )
14
8
YY : Year : 08, 09,10~
WW : Week : 01~ 52; 52
represents 52 and 53 week
X : Internal Code
Logo
74LVC14A
YY WW X
Part Number
1
7
Part Number
74LVC14A
Document number: DS35262 Rev. 3 - 2
Package
74LVC14AS14
SO-14
74LVC14AT14
TSSOP-14
7 of 10
www.diodes.com
July 2012
© Diodes Incorporated
74LVC14A
Package Outline Dimensions (All dimensions in mm.)
Package Type: SO-14
E
H
Gauge Plane
L
θ
Detail “A”
D
7°
(4
x)
A2
A
e
B
A1
Detail “A”
SO-14
Dim
Min
Max
A
1.47
1.73
A1
0.10
0.25
A2
1.45 Typ
B
0.33
0.51
D
8.53
8.74
E
3.80
3.99
e
1.27 Typ
H
5.80
6.20
L
0.38
1.27
0°
8°
θ
All Dimensions in mm
0.25
Package Type: TSSOP-14
B
Gauge Plane
Seating Plane
L
F1
a2
Pin# 1 Indent
F
Detail ‘A’
G
K
A
a1
D
TSSOP-14
Dim
Min
Max
a1
7° (4X)
a2
8°
0°
A
4.9
5.10
B
4.30
4.50
C
1.2
⎯
D
0.8
1.05
F
1.00 Typ
F1
0.45
0.75
G
0.65 Typ
K
0.19
0.30
L
6.40 Typ
All Dimensions in mm
C
Detail ‘A’
74LVC14A
Document number: DS35262 Rev. 3 - 2
8 of 10
www.diodes.com
July 2012
© Diodes Incorporated
74LVC14A
Suggested Pad Layout
Package Type: SO-14
X
C1
C2
Dimensions Value (in mm)
X
0.60
Y
1.50
C1
5.4
C2
1.27
Y
Package Type: TSSOP-14
X
C1
C2
Dimensions Value (in mm)
X
0.45
Y
1.45
C1
5.9
C2
0.65
Y
74LVC14A
Document number: DS35262 Rev. 3 - 2
9 of 10
www.diodes.com
July 2012
© Diodes Incorporated
74LVC14A
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2012, Diodes Incorporated
www.diodes.com
74LVC14A
Document number: DS35262 Rev. 3 - 2
10 of 10
www.diodes.com
July 2012
© Diodes Incorporated