74LVC86A QUADRUPLE 2-INPUT EXCLUSIVE OR GATES Description Pin Assignments The 74LVC86A provides four independent 2-input exclusive OR gates. ( Top View ) The device is designed for operation with a power supply range of 1.65V to 5.5V. The inputs are tolerant to 5.5V allowing this 1A 1 14 Vcc device to be used in a mixed voltage environment. The device is fully 1B 2 13 4B 1Y 3 12 4A 2A 4 11 4Y 2B 5 10 3B 2Y 6 9 3A GND 7 8 3Y specified for partial power down applications using IOFF. The IOFF circuitry disables the output preventing damaging current backflow when the device is powered down. The gates perform the positive Boolean function: Y = A ⊕B or Y = AB + A B Features • Supply Voltage Range from 1.65V to 5.5V • Sinks 24mA at VCC = 3.3V • CMOS low power consumption • IOFF Supports Partial-Power-Down Mode Operation Applications • Inputs or outputs accept up to 5.5V • Voltage Level Shifting • Inputs can be driven by 3.3V or 5.5V allowing for voltage • General Purpose Logic translation applications. • Power Down Signal Isolation ESD Protection Exceeds JESD 22 • • Wide array of products such as: 200-V Machine Model (A115-A) PCs, networking, notebooks, ultrabooks, netbooks 2000-V Human Body Model (A114-A) Computer peripherals, hard drives, CD/DVD ROM Latch-Up Exceeds 250mA per JESD 78, Class II TV, DVD, DVR, set top box Exceeds 1000-V Charged Device Model (C101C) • Range of Package Options SO-14 and TSSOP-14 • Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) • Halogen and Antimony Free. “Green” Device (Note 3) Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 74LVC86A Document number: DS35264 Rev. 3 - 2 1 of 10 www.diodes.com June 2012 © Diodes Incorporated 74LVC86A Pin Descriptions Pin Number Pin Name Description 1 1A Data Input 2 1B Data Input 3 1Y Data Output 4 2A Data Input 5 2B Data Input 6 2Y Data Output 7 GND 8 3Y Ground Data Output 9 3A Data Input 10 3B Data Input 11 4Y Data Output 12 4A Data Input 13 4B Data Input 14 VCC Supply Voltage Logic Diagram Function Table Inputs A B Output Y L L L L H H H L H H H L 74LVC86A Document number: DS35264 Rev. 3 - 2 2 of 10 www.diodes.com June 2012 © Diodes Incorporated 74LVC86A Absolute Maximum Ratings (Note 4) (@TA = +25°C, unless otherwise specified.) Symbol ESD HBM ESD CDM ESD MM VCC Description Rating Unit Human Body Model ESD Protection 2 KV Charged Device Model ESD Protection 1 KV 200 V Machine Model ESD Protection Supply Voltage Range -0.5 to 6.5 V VI Input Voltage Range -0.5 to 6.5 V VO Voltage applied to output in high impedance or IOFF state -0.5 to 6.5 V VO Voltage applied to output in high or low state -0.3 to VCC +0.5 V IIK Input Clamp Current VI <0 -50 mA VO <0 -50 mA 50 mA ±100 mA IOK Output Clamp Current IO Continuous output current ICC,, IGND TJ Continuous current through Vcc or GND Operating Junction Temperature -40 to +150 °C TSTG Storage Temperature -65 to +150 °C PTOT Total Power Dissipation 500 mW Note: 4. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device operation should be within recommend values. Recommended Operating Conditions (Note 5) (@TA = +25°C, unless otherwise specified.) Symbol VCC VI VO Parameter Input Voltage Output Voltage Δt/ΔV Input transition rise or fall rate TA Operating free-air temperature Note: Conditions Supply Voltage Min Max Unit 1.65 5.50 V 0 5.5 V Active Mode 0 VCC V VCC = 0V; Power Down Mode 0 5.5 V VCC = 1.65V to 2.7V 20 VCC = 2.7V to 5.5V 10 -40 +125 ns/V °C 5. Unused inputs should be held at VCC or Ground. 74LVC86A Document number: DS35264 Rev. 3 - 2 3 of 10 www.diodes.com June 2012 © Diodes Incorporated 74LVC86A Electrical Characteristics (@TA = +25°C, unless otherwise specified.) Symbol VIH VIL Parameter Test Conditions High-level Input Voltage Low-level input voltage High Level Output Voltage High-level Output Voltage Max TA = -40°C to +125°C Min 1.65V to 1.95V 0.65 X VCC 0.65 X VCC 2.3V to 2.7V 1.7 1.6 2.7V to 3.6V 2.0 2.0 4.5V to 5.5V 0.7 X VCC 2.0 Max Unit 1.65V to 1.95V 0.35 X VCC 0.35 X VCC 2.3V to 2.7V 0.7 0.7 2.7V to 3.6V 0.8 0.8 4.5V to 5.5 V 0.3 X VCC 0.3 X VCC 1.65V to 3.6V VCC – 0.2 V VCC – 0.3 1.65V 1.2 IOH = -8mA 2.3V 1.9 2.7V 2.2 2.05 3.0V 2.3 2.1 IOH = -24mA 3.0V 2.2 2.0 IOH = 100μA 1.65V to 5.5V 0.2 0.3 IOH = 4mA 1.65V 0.45 0.6 IOH = 8mA 2.3V 0.70 0.85 2.7V 0.40 0.6 3.0V 0.55 0.6 IOH =-24mA 3.0V 0.55 0.6 3.6V ±5 ±20 μA 0 10 20 μA 3.6V 10 40 μA 2.7V to 3.6V 500 5000 μA IOH = 12mA II Input Current VI =GND to 5.5V IOFF Power Down Leakage Current VI or VO = 0V to 3.6V ICC Supply Current VI = GND or VCC IO=0 Additional Supply Current One input at VCC –0.6V Other ΔICC Min IOH = -4mA IOH = -12mA VOL TA = -40°C to +85°C V IOH = -100μA VOH VCC 74LVC86A Document number: DS35264 Rev. 3 - 2 V V 4 of 10 www.diodes.com June 2012 © Diodes Incorporated 74LVC86A Switching Characteristics Symbol Parameter tPD Propagation Delay AN or BN to YN tSK(0) Output Skew Time Test Conditions Figure 1 VCC TA = +25°C Min Typ -40°C to +85°C Max Min -40°C to +125°C Max Min Max 1.65V to1.95V 1.0 4.1 9.4 1.0 9.9 1.0 11.4 2.3V to 2.7V 1.0 2.9 7.1 1.0 7.6 1.0 9.7 2.7V 1.0 2.8 5.4 1.0 5.6 1.0 7.1 3.0V to 3.6V 1.0 2.5 4.4 1.0 4.6 1.0 5.8 3.0V to 3.6V 1.0 Unit ns 1.5 ns Operating Characteristics (@TA = +25°C, unless otherwise specified.) Parameter Cpd Power dissipation capacitance per gate CI Input Capacitance Test Conditions VCC = 1.8V VCC = 2.5V VCC = 3.3V Typ Typ Typ f = 10 MHz 6.4 7.4 8.4 pF 4 4 4 pF Vi = VCC – or GND Unit Package Characteristics Symbol Note: Parameter Test Conditions θJA Thermal Resistance Junction-to-Ambient SO-14 θJC Thermal Resistance Junction-to-Case SO-14 TSSOP-14 TSSOP-14 VCC (Note 6) (Note 6) Min Typ Max Unit TBD o C/W 159 TBD o C/W 25 6. Test condition for SO-14 and TSSOP-14: Device mounted on FR-4 substrate PC board, 2oz copper, with minimum recommended pad layout. 74LVC86A Document number: DS35264 Rev. 3 - 2 5 of 10 www.diodes.com June 2012 © Diodes Incorporated 74LVC86A Parameter Measuement Information VCC Inputs VM CL ≤2ns VCC/2 30pF 1KΩ ≤2ns VCC/2 30pF 500Ω 2.7V ≤2.5ns 1.5V 50pF 500Ω 2.7V ≤2.5ns 1.5V 50pF 500Ω VI tr/tf 1.8V±0.15V VCC 2.5V±0.2V VCC 2.7V 3.3V±0.3V RL Voltage Waveform Pulse Duration Voltage Waveform Propagation Delay Times Inverting and Non Inverting Outputs Notes: A . Includes test lead and test apparatus capacitance. B. All pulses are supplied at pulse repetition rate ≤ 10 MHz C. Inputs are measured separately one transition per measurement D. tPLH and tPHL are the same as tPD Figure 1. Load Circuit and Voltage Waveforms 74LVC86A Document number: DS35264 Rev. 3 - 2 6 of 10 www.diodes.com June 2012 © Diodes Incorporated 74LVC86A Ordering Information Device Package Code 74LVC86AS14-13 74LVC86AT14-13 Notes: 13” Tape and Reel Packaging (Note 7) Quantity Part Number Suffix S14 SO-14 2500/Tape & Reel -13 T14 TSSOP-14 2500/Tape & Reel -13 7. The taping orientation and tape details can be found at http://www.diodes.com/datasheets/ap02007.pdf Marking Information (1) SO-14, TSSOP-14 74LVC86A Document number: DS35264 Rev. 3 - 2 Part Number Package 74LVC86AS14 SO-14 74LVC86AT14 TSSOP-14 7 of 10 www.diodes.com June 2012 © Diodes Incorporated 74LVC86A Package Outline Dimensions (All dimensions in mm.) Package Type: SO-14 E H Gauge Plane L θ Detail “A” D 7° (4 x) A2 A e B A1 Detail “A” SO-14 Dim Min Max A 1.47 1.73 A1 0.10 0.25 A2 1.45 Typ B 0.33 0.51 D 8.53 8.74 E 3.80 3.99 e 1.27 Typ H 5.80 6.20 L 0.38 1.27 0° 8° θ All Dimensions in mm 0.25 Package Type: TSSOP-14 B Gauge Plane Seating Plane L F1 a2 Pin# 1 Indent F Detail ‘A’ G K A a1 D TSSOP-14 Dim Min Max a1 7° (4X) a2 8° 0° A 4.9 5.10 B 4.30 4.50 C 1.2 ⎯ D 0.8 1.05 F 1.00 Typ F1 0.45 0.75 G 0.65 Typ K 0.19 0.30 L 6.40 Typ All Dimensions in mm C Detail ‘A’ 74LVC86A Document number: DS35264 Rev. 3 - 2 8 of 10 www.diodes.com June 2012 © Diodes Incorporated 74LVC86A Suggested Pad Layout Package Type: SO-14 X C1 C2 Dimensions Value (in mm) X 0.60 Y 1.50 C1 5.4 C2 1.27 Y Package Type: TSSOP-14 X C1 C2 Dimensions Value (in mm) X 0.45 Y 1.45 C1 5.9 C2 0.65 Y 74LVC86A Document number: DS35264 Rev. 3 - 2 9 of 10 www.diodes.com June 2012 © Diodes Incorporated 74LVC86A IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2012, Diodes Incorporated www.diodes.com 74LVC86A Document number: DS35264 Rev. 3 - 2 10 of 10 www.diodes.com June 2012 © Diodes Incorporated