NTJS3151P D

NTJS3151P, NVJS3151P
Trench Power MOSFET
12 V, 3.3 A, Single P−Channel,
ESD Protected SC−88
Features
•
•
•
•
•
www.onsemi.com
Leading Trench Technology for Low RDS(ON) Extending Battery Life
SC−88 Small Outline (2x2 mm, SC70−6 Equivalent)
Gate Diodes for ESD Protection
NV Prefix for Automotive and Other Applications Requiring Unique
Site and Control Change Requirements; AEC−Q101 Qualified and
PPAP Capable
These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
V(BR)DSS
RDS(on) Typ
ID Max
45 mW @ −4.5 V
−12 V
−3.3 A
67 mW @ −2.5 V
133 mW @ −1.8 V
SC−88 (SOT−363)
Applications
• High Side Load Switch
• Cell Phones, Computing, Digital Cameras, MP3s and PDAs
D
1
6
D
D
2
5
D
G
3
4
S
MAXIMUM RATINGS (TJ = 25°C unless otherwise stated)
Parameter
Symbol
Value
Units
Drain−to−Source Voltage
VDSS
−12
V
Gate−to−Source Voltage
VGS
±12
V
ID
−2.7
A
Continuous Drain
Current (Note 1)
Power Dissipation
(Note 1)
Steady
State
TA = 25 °C
TA = 85 °C
−2.0
t≤5s
TA = 25 °C
−3.3
Steady
State
TA = 25 °C
PD
tp = 10 ms
Top View
3 kW
G
0.625
W
IDM
−8.0
A
TJ,
TSTG
−55 to
150
°C
Source Current (Body Diode)
IS
−0.8
A
Lead Temperature for Soldering Purposes
(1/8” from case for 10 s)
TL
260
°C
Pulsed Drain Current
Operating Junction and Storage Temperature
S
MARKING DIAGRAM &
PIN ASSIGNMENT
D
1
THERMAL RESISTANCE RATINGS (Note 1)
Parameter
D
Symbol
Max
Units
Junction−to−Ambient – Steady State
RqJA
200
°C/W
Junction−to−Ambient − t ≤ 5 s
RqJA
141
Junction−to−Lead – Steady State
RqJL
102
SC−88/SOT−363
CASE 419B
STYLE 28
XXX
M
G
S
6
XXX MG
G
1
D
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
1. Surface mounted on FR4 board using 1 in sq pad size
(Cu area = 1.127 in sq [1 oz] including traces).
D
D
G
= Device Code
= Date Code
= Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 4 of this data sheet.
© Semiconductor Components Industries, LLC, 2016
June, 2016 − Rev. 4
1
Publication Order Number:
NTJS3151/D
NTJS3151P, NVJS3151P
ELECTRICAL CHARACTERISTICS (TJ=25°C unless otherwise stated)
Symbol
Test Condition
Min
Drain−to−Source Breakdown Voltage
V(BR)DSS
VGS = 0 V, ID = −250 mA
−12
Drain−to−Source Breakdown Voltage
Temperature Coefficient
V(BR)DSS/TJ
Parameter
Typ
Max
Unit
OFF CHARACTERISTICS
Zero Gate Voltage Drain Current
IDSS
Gate−to−Source Leakage Current
IGSS
V
10
VGS = −9.6 V,
VDS = 0 V
TJ = 25°C
mV/°C
−1.0
TJ = 125°C
mA
−2.5
VDS = 0 V, VGS = ±4.5 V
±1.5
mA
VDS = 0 V, VGS = ±12 V
±10
mA
−1.2
V
ON CHARACTERISTICS (Note 2)
Gate Threshold Voltage
VGS(TH)
Negative Threshold Temperature
Coefficient
VGS(TH)/TJ
Drain−to−Source On Resistance
RDS(on)
Forward Transconductance
gFS
VGS = VDS, ID = 100 mA
−0.40
3.4
mV/°C
VGS = −4.5 V, ID = −3.3 A
45
60
VGS = −2.5 V, ID = −2.9 A
67
90
VGS = −1.8 V, ID = −1.0 A
133
160
VGS = −10 V, ID = −3.3 A
15
S
850
pF
mW
CHARGES AND CAPACITANCES
CISS
Input Capacitance
Output Capacitance
COSS
Reverse Transfer Capacitance
CRSS
Total Gate Charge
VGS = 0 V, f = 1.0 MHz,
VDS = −12 V
170
110
QG(TOT)
nC
8.6
VGS = −4.5 V, VDS = −5.0 V,
ID = −3.3 A
Gate−to−Source Charge
QGS
Gate−to−Drain Charge
QGD
2.2
RG
3000
W
td(ON)
0.86
ms
Gate Resistance
1.3
SWITCHING CHARACTERISTICS (Note 3)
Turn−On Delay Time
Rise Time
Turn−Off Delay Time
Fall Time
tr
td(OFF)
VGS = −4.5 V, VDD = −6.0 V,
ID = −1.0 A, RG = 6.0 W
tf
1.5
3.5
3.9
DRAIN−SOURCE DIODE CHARACTERISTICS (Note 2)
Forward Diode Voltage
VSD
VGS = 0 V,
IS = −3.3 A
TJ = 25°C
−0.85
TJ = 125°C
−0.7
−1.2
V
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
2. Pulse Test: pulse width ≤ 300ms, duty cycle ≤ 2%.
3. Switching characteristics are independent of operating junction temperatures.
www.onsemi.com
2
NTJS3151P, NVJS3151P
TYPICAL PERFORMANCE CURVES (TJ = 25°C unless otherwise noted)
8
−ID, DRAIN CURRENT (AMPS)
−ID, DRAIN CURRENT (AMPS)
8
TJ = 25°C
VGS = −4.5 V
VGS = −3.4 V
6
−2 V
−2.4 V
4
2
−1.6 V
0
−1.4 V
−1.2 V
1
0
2
4
3
VDS ≤ −12 V
6
4
125°C
2
25°C
TJ = −55°C
0
5
0
0.5
1
1.5
2
2.5
3
3.5
4 4.5
−VGS, GATE−TO−SOURCE VOLTAGE (VOLTS)
−VDS, DRAIN−TO−SOURCE VOLTAGE (VOLTS)
Figure 2. Transfer Characteristics
RDS(on), DRAIN−TO−SOURCE RESISTANCE (W)
RDS(on), DRAIN−TO−SOURCE RESISTANCE (W)
Figure 1. On−Region Characteristics
0.1
VGS = −4.5 V
0.075
TJ = 125°C
0.05
TJ = 25°C
TJ = −55°C
0.025
0
0.5
1.5
2.5
3.5
4.5
5.5
6.5
7.5
−ID, DRAIN CURRENT (AMPS)
0.5
0.4
0.3
0.2
0
0.5
1.5
2.5
3.5
4.5
5.5
6.5
7.5
−ID, DRAIN CURRENT (AMPS)
100000
VGS = 0 V
ID = −3.3 A
VGS = −4.5 V
−IDSS, LEAKAGE CURRENT (nA)
RDS(on), DRAIN−TO−SOURCE
RESISTANCE (NORMALIZED)
VGS = −4.5 V
Figure 4. On−Resistance vs. Drain Current and
Gate Voltage
2.0
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
−50
VGS = −2.5 V
0.1
Figure 3. On−Resistance vs. Drain Current and
Temperature
1.8
TJ = 25°C
VGS = −1.8 V
10000
TJ = 150°C
1000
TJ = 125°C
100
−25
0
25
50
75
100
125
150
TJ, JUNCTION TEMPERATURE (°C)
2
8
4
6
10
−VDS, DRAIN−TO−SOURCE VOLTAGE (VOLTS)
Figure 5. On−Resistance Variation with
Temperature
Figure 6. Drain−to−Source Leakage Current
vs. Voltage
0
www.onsemi.com
3
12
NTJS3151P, NVJS3151P
−VGS, GATE−TO−SOURCE VOLTAGE (VOLTS)
TYPICAL PERFORMANCE CURVES (TJ = 25°C unless otherwise noted)
1600
TJ = 25°C
VGS = 0 V
C, CAPACITANCE (pF)
1400
1200
1000
Ciss
800
600
400
Coss
200
Crss
0
0
4
2
6
8
12
10
4.5
QT
4
3.5
3
2.5
Q1
2
1.5
1
ID = −3.3 A
TJ = 25°C
0.5
0
2
0
GATE−TO−SOURCE OR DRAIN−TO−SOURCE VOLTAGE (VOLTS)
Figure 7. Capacitance Variation
8
4
6
Qg, TOTAL GATE CHARGE (nC)
10
Figure 8. Gate−to−Source Voltage vs. Total
Gate Charge
10000
−IS, SOURCE CURRENT (AMPS)
4
tf
td(off)
t, TIME (ns)
Q2
tr
1000
td(on)
VDD = −6.0 V
ID = −1.0 A
VGS = −4.5 V
100
VGS = 0 V
TJ = 25°C
3
2
1
0
1
10
100
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8 0.9
RG, GATE RESISTANCE (OHMS)
−VSD, SOURCE−TO−DRAIN VOLTAGE (VOLTS)
Figure 9. Resistive Switching Time Variation
vs. Gate Resistance
Figure 10. Diode Forward Voltage vs. Current
ORDERING INFORMATION
Device
Marking
NTJS3151PT1G
TJ
NTJS3151PT2G
TJ
NVJS3151PT1G*
VTJ
Package
Shipping†
SC−88
(Pb−Free)
3000 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
*NV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP
Capable.
www.onsemi.com
4
NTJS3151P, NVJS3151P
PACKAGE DIMENSIONS
SC−88/SC70−6/SOT−363
CASE 419B−02
ISSUE Y
2X
aaa H D
D
A
D
6
5
GAGE
PLANE
4
L
L2
E1
E
1
2
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSIONS D AND E1 DO NOT INCLUDE MOLD FLASH,
PROTRUSIONS, OR GATE BURRS. MOLD FLASH, PROTRUSIONS, OR GATE BURRS SHALL NOT EXCEED 0.20 PER END.
4. DIMENSIONS D AND E1 AT THE OUTERMOST EXTREMES OF
THE PLASTIC BODY AND DATUM H.
5. DATUMS A AND B ARE DETERMINED AT DATUM H.
6. DIMENSIONS b AND c APPLY TO THE FLAT SECTION OF THE
LEAD BETWEEN 0.08 AND 0.15 FROM THE TIP.
7. DIMENSION b DOES NOT INCLUDE DAMBAR PROTRUSION.
ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.08 TOTAL IN
EXCESS OF DIMENSION b AT MAXIMUM MATERIAL CONDITION. THE DAMBAR CANNOT BE LOCATED ON THE LOWER
RADIUS OF THE FOOT.
H
DETAIL A
3
aaa C
2X
bbb H D
2X 3 TIPS
e
B
6X
DIM
A
A1
A2
b
C
D
E
E1
e
L
L2
aaa
bbb
ccc
ddd
b
ddd
TOP VIEW
M
A2
C A-B D
DETAIL A
A
6X
ccc C
A1
SIDE VIEW
C
SEATING
PLANE
c
MILLIMETERS
MIN
NOM MAX
−−−
−−−
1.10
0.00
−−−
0.10
0.70
0.90
1.00
0.15
0.20
0.25
0.08
0.15
0.22
1.80
2.00
2.20
2.00
2.10
2.20
1.15
1.25
1.35
0.65 BSC
0.26
0.36
0.46
0.15 BSC
0.15
0.30
0.10
0.10
END VIEW
STYLE 28:
PIN 1. DRAIN
2. DRAIN
3. GATE
4. SOURCE
5. DRAIN
6. DRAIN
RECOMMENDED
SOLDERING FOOTPRINT*
6X
6X
0.30
INCHES
NOM MAX
−−− 0.043
−−− 0.004
0.035 0.039
0.008 0.010
0.006 0.009
0.078 0.086
0.082 0.086
0.049 0.053
0.026 BSC
0.010 0.014 0.018
0.006 BSC
0.006
0.012
0.004
0.004
MIN
−−−
0.000
0.027
0.006
0.003
0.070
0.078
0.045
0.66
2.50
0.65
PITCH
DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
5
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
NTJS3151P/D