NSZ5V6V2T1G Zener Voltage Regulators 200 mW SOD-523 Surface Mount This series of Zener diodes is packaged in a SOD-523 surface mount package. They are designed to provide voltage regulation protection and are especially attractive in situations where space is at a premium. They are well suited for applications such as cellular phones, hand held portables, and high density PC boards. http://onsemi.com Specification Features •Standard Zener Breakdown Voltage of 5.6 V •Steady State Power Rating of 200 mW •Small Body Outline Dimensions: 1 Cathode 0.047″ x 0.032″ (1.20 mm x 0.80 mm) •Low Body Height: 0.028″ (0.7 mm) •ESD Rating of Class 3 (>16 kV) per Human Body Model •Tight Tolerance VZ •These are Pb-Free Devices 2 1 SOD-523 CASE 502 PLASTIC Mechanical Characteristics CASE: Void‐free, transfer‐molded, thermosetting plastic MARKING DIAGRAM Epoxy Meets UL 94, V-0 LEAD FINISH: 100% Matte Sn (Tin) MOUNTING POSITION: Any 1 QUALIFIED MAX REFLOW TEMPERATURE: 260°C Device Meets MSL 1 Requirements Total Device Dissipation FR-5 Board, (Note 1) @ TA = 25°C Derate above 25°C Thermal Resistance from Junction-to-Ambient Junction and Storage Temperature Range CT MG G 2 CT = Specific Device Code M Date Code* G = Pb-Free Package MAXIMUM RATINGS Rating 2 Anode (Note: Microdot may be in either location) Symbol Max Unit 200 1.5 mW mW/°C 635 °C/W PD RqJA TJ, Tstg °C -65 to +150 Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. FR-4 Minimum Pad. *Date Code orientation may vary depending upon manufacturing location. ORDERING INFORMATION Device Package Shipping† NSZ5V6V2T1G SOD-523* 3000/Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *This package is inherently Pb-Free. DEVICE MARKING INFORMATION See specific marking information in the device marking column of the Electrical Characteristics table on page 2 of this data sheet. © Semiconductor Components Industries, LLC, 2007 May, 2007 - Rev. 0 1 Publication Order Number: NSZ5V6V2/D NSZ5V6V2T1G ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted, VF = 0.9 V Max. @ IF = 10 mA for all types) Symbol I IF Parameter VZ Reverse Zener Voltage @ IZT IZT Reverse Current ZZT Maximum Zener Impedance @ IZT IZK Reverse Current ZZK Maximum Zener Impedance @ IZK IR Reverse Leakage Current @ VR VR Reverse Voltage IF Forward Current VF Forward Voltage @ IF QVZ Maximum Temperature Coefficient of VZ C Max. Capacitance @VR = 0 and f = 1 MHz VZ VR V IR VF IZT Figure 1. Zener Voltage Regulator ELECTRICAL CHARACTERISTICS (VF = 0.9 Max @ IF = 10 mA for all types) NSZ5V6V2T1G Test Current Izt mA 5.0 Min Max ZZK IZ = 1.0 mA W Max 5.49 5.73 200 25 50 ZZT IZ = IZT @ 10% Mod W Max mA V Min Max C pF Max @ VR =0 f = 1 MHz 40 1.0 2.0 -2.0 2.5 200 Max IR @ VR dVZ/dt (mV/k) @ IZT1 = 5 mA 100 80 POWER DISSIPATION (%) Device* Zener Voltage VZ 60 40 20 0 0 75 100 125 TEMPERATURE (°C) Figure 2. Steady State Power Derating http://onsemi.com 2 150 NSZ5V6V2T1G PACKAGE DIMENSIONS SOD-523 CASE 502-01 ISSUE C -X- NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. A -YB 1 2 D 2 PL 0.08 (0.003) M DIM A B C D J K S T X Y MILLIMETERS MIN NOM MAX 1.10 1.20 1.30 0.70 0.80 0.90 0.50 0.60 0.70 0.25 0.30 0.35 0.07 0.14 0.20 0.15 0.20 0.25 1.50 1.60 1.70 MIN 0.043 0.028 0.020 0.010 0.0028 0.006 0.059 INCHES NOM 0.047 0.032 0.024 0.012 0.0055 0.008 0.063 MAX 0.051 0.035 0.028 0.014 0.0079 0.010 0.067 C -T- K J SEATING PLANE S SOLDERING FOOTPRINT* 1.40 0.0547 0.40 0.0157 0.40 0.0157 SCALE 10:1 mm Ǔ ǒinches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 http://onsemi.com 3 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NSZ5V6V2/D