Axial Lead Fuses 5×20 mm > Time-Lag > 215SP Series 215SP Series, PS E 5x20 mm, Time-Lag Fuse Description 5x20mm Time-Lag surge withstand ceramic body cartridge fuse designed to IEC specification Features t %FTJHOFEUP International (IEC) Standards for use globally t )JHICSFBLJOHDBQBDJUZ t "WBJMBCMFJOBYJBMMFBE form t 3P)4DPNQMJBOUBOE Pb-free t .FFUTUIF*&$ 60127-2, Sheet 5 specification for Time-Lag Fuses Agency Approvals PS E Applications Agency File Number Ampere Range Leaded NBK080205E10480B NBK250702E10480 F 1A – 5A 6.3A – 10A Certificate No. CQC100120411490 1A – 6.3A Certificate No. SU05001-2011B SU05001-10001 SU05001-10002 Certificate No. Recognised File No. Guide No. E10480 JDYX2 File No. Acc. Class No. 029862 LR1422-30 Licence. No. Used as supplementary protection in appliance or VUJMJ[BUJPOFRVJQNFOUUPQSPWJEFJOEJWJEVBMQSPUFDUJPOGPS components or internal circuits. Electrical Characteristics for Series % of Ampere Rating 1A – 2.5A 3.15A – 6.3A 8A Ampere Rating Opening Time 1A - 3.15A 30 minutes, Maximum 4A - 6.3A 30 minutes, Maximum 210% 1A – 10A 30 minutes, Maximum .75 sec. Min.; 80 secs. Max. 4A - 6.3A .75 sec. Min.; 80 secs. Max. 8A - 10A .75 sec. Min.; 80 secs. Max. 1A - 3.15A .095 sec. Min.; 5 secs. Max. 4A - 6.3A .150 sec. Min.; 5 secs. Max. 275% 1A – 10A 40013521 8A - 10A 1A - 3.15A 400% 1 – 8A 1A – 10A 8A - 10A .150 sec. Min.; 5 secs. Max. 1A - 3.15A .010 sec. Min.; .150 secs. Max. 4A - 6.3A .010 sec. Min.; .150 secs. Max. 8A - 10A .010 sec. Min.; .150 secs. Max. 1000% Electrical Characteristic Specifications by Item Amp Code Amp Voltage Rating Rating Interrupting Rating Nominal Resistance Cold Ohms (Ohms) Nominal Melting I2t (A2 sec) Maximum Maximum Power Voltage Drop at Dissipation at Rated Current Rated Current (mV) (W) Agency Approvals PS E 001. 1 250 0.1515 1.52000 350 2.5 x x x x x x x 1.25 1.25 250 0.1074 3.20000 300 2.5 x x x x x x x 01.6 1.6 250 0.0707 6.83000 200 2.5 x x x x x x x 002. 2 250 0.0566 11.68000 190 2.5 x x x x x x x 02.5 2.5 250 0.0386 22.29000 180 2.5 x x x x x x x x 1500 A @ 250 VAC 3.15 3.15 250 0.0283 43.25500 140 4 x x x x x x 004. 4 250 0.0185 46.96000 100 4 x x x x x x x 005. 5 250 0.0153 66.09500 100 4 x x x x x x x 06.3 6.3 250 0.0108 128.75000 100 4 x x x x x x x 008. 8 250 0.0092 209.88000 100 4 x x x x x x 010. 10 250 0.0066 333.56500 100 4 x x x © 2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/215SP.html for current information. 1 Revised: February 14, 2011 x 215SP Series 215SP Series Agency Introduction to Circuit Protection Axial Lead Fuses 5×20 mm > Time-Lag >Transientology 215SP Series Average Time Current Curves 215001. 2151.25 21501.6 215002. 21502.5 2153.15 215004. 215005. 21506.3. 215008. 215010. Temperature Rerating Curve 10000 Time (seconds) 1000 100 10 1 0.1 0.01 0.001 0.01 0.1 1 10 100 Amps Soldering Parameters - Wave Soldering Recommended Process Parameters: 280 260 Wave Parameter 240 220 200 Preheat: 180 %FQFOETPO'MVY"DUJWBUJPO5FNQFSBUVSF 160 140 120 100 80 60 40 Lead-Free Recommendation (Typical Industry Recommendation) Temperature Minimum: 100° C Temperature Maximum: Preheat Time: 150° C 60-180 seconds Solder Pot Temperature: 260° C Maximum Solder Dwell Time: 2-5 seconds 240 230 220 210 200 190 180 170 160 150 140 130 120 110 90 100 80 70 60 50 40 30 0 0 20 20 10 Temperature (°C) - Measured on bottom side of board 300 Recommended Hand-Solder Parameters: Time (Seconds) Cooling Time Preheat Time Solder Iron Temperature: 350° C +/- 5°C )FBUJOH5JNFTFDPOETNBY Dwell Time Note: These devices are not recommended for IR or Convection Reflow process. 215SP Series 2 © 2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/215SP.html for current information. Axial Lead Fuses 5×20 mm > Time-Lag > 215SP Series Product Characteristics Materials Body: Ceramic Cap:/JDLFMoQMBUFE#SBTT Leads: Tin–plated Copper Operating Temperature –55ºC to +125ºC Terminal Strength MIL-STD-202G, Method 211A, Test Condition A Thermal Shock MIL-STD-202G, Method 107G, Test Condition B (5 cycles, –65ºC to +125ºC) Solderability Reference IEC 60127 Second Edition 2003-01 Annex A Vibration MIL-STD-202G, Method 201A Product Marking Cap 1:#SBOEMPHPDVSSFOUBOEWPMUBHF ratings Cap 2:"HFODZBQQSPWBMNBSLT Humidity MIL-STD-202G, Method 103B, Test $POEJUJPO")JHI3) BOE FMFWBUFEUFNQ$ GPSIPVST Salt Spray MIL-STD-202G, Method 101D, Test Condition B Dimensions Part Numbering System 0215 xxxx M X E SP P 20 ± 0.5 Series Amp Code 5.1 ± 0.6 Refer to Amp Code column of Electrical Characteristics Table 5.1 ± 0.6 "BOE"IBWFNNEJBNFUFS Quantity Code M = 1000 Packaging Code X = Filler Option Codes Single Pigtail Lead-free Packaging Packaging Option 215SP Series #VML Packaging Specification Quantity Packaging Code Reel Size N/A 1000 MXE N/A © 2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/215SP.html for current information. 3 215SP Series 215SP Series Blank : Cartidge Type Fuse E : Axial Lead Fuse