Freescale Semiconductor Technical Data Document Number: MRF6V3090N Rev. 2, 10/2015 RF Power LDMOS Transistors N--Channel Enhancement--Mode Lateral MOSFETs Designed for broadcast and commercial aerospace broadband applications with frequencies from 470 to 1215 MHz. Typical Performance (UHF 470--860 Reference Circuit): VDD = 50 Volts, IDQ = 450 mA, 64 QAM, Input Signal PAR = 9.5 dB @ 0.01% Probability on CCDF. Signal Type Pout (W) f (MHz) Gps (dB) D (%) Output Signal PAR (dB) IMD Shoulder (dBc) DVB--T (8k OFDM) 18 Avg. 470 21.6 26.8 8.6 --31.8 650 22.9 28.0 8.7 --34.4 860 21.9 28.3 7.9 --29.2 Typical Performance (L--Band 960--1215 MHz Reference Circuit): VDD = 50 Volts, IDQ = 100 mA. Signal Type Pulse (128 sec, 10% Duty Cycle) Pout (W) f (MHz) Pin (W) Gps (dB) D (%) 90 Peak 960 1.3 18.4 55.3 1030 1.41 18 56.9 1090 1.65 17.4 50.7 1215 1.68 17.3 51.0 Features Capable of Handling 10:1 VSWR, All Phase Angles, @ 50 Vdc, 860 MHz, 90 Watts CW Output Power Characterized with Series Equivalent Large--Signal Impedance Parameters Internally Input Matched for Ease of Use Qualified Up to a Maximum of 50 VDD Operation Integrated ESD Protection Excellent Thermal Stability Greater Negative Gate--Source Voltage Range for Improved Class C Operation MRF6V3090N MRF6V3090NB 470--1215 MHz, 90 W, 50 V BROADBAND RF POWER LDMOS TRANSISTORS TO--270WB--4 PLASTIC MRF6V3090N TO--272WB--4 PLASTIC MRF6V3090NB PARTS ARE SINGLE--ENDED Gate Drain Gate Drain (Top View) Note: Exposed backside of the package is the source terminal for the transistor. Figure 1. Pin Connections Freescale Semiconductor, Inc., 2010--2011, 2015. All rights reserved. RF Device Data Freescale Semiconductor, Inc. MRF6V3090N MRF6V3090NB 1 Table 1. Maximum Ratings Rating Symbol Value Unit Drain--Source Voltage VDSS --0.5, +110 Vdc Gate--Source Voltage VGS --6.0, +10 Vdc Storage Temperature Range Tstg -- 65 to +150 C Case Operating Temperature TC 150 C TJ 225 C Symbol Value (2,3) Unit Operating Junction Temperature (1,2) Table 2. Thermal Characteristics Characteristic Thermal Resistance, Junction to Case Case Temperature 76C, 18 W CW, 50 Vdc, IDQ = 350 mA, 860 MHz Case Temperature 80C, 90 W CW, 50 Vdc, IDQ = 350 mA, 860 MHz RJC C/W 0.79 0.82 Table 3. ESD Protection Characteristics Test Methodology Class Human Body Model (per JESD22--A114) 2 (2001--4000 V) Machine Model (per EIA/JESD22--A115) B (201--400 V) Charge Device Model (per JESD22--C101) IV (>1000 V) Table 4. Moisture Sensitivity Level Test Methodology Per JESD22--A113, IPC/JEDEC J--STD--020 Rating Package Peak Temperature Unit 3 260 C Table 5. Electrical Characteristics (TA = 25C unless otherwise noted) Symbol Min Typ Max Unit IGSS — — 0.5 Adc V(BR)DSS 115 — — Vdc Zero Gate Voltage Drain Leakage Current (VDS = 50 Vdc, VGS = 0 Vdc) IDSS — — 10 Adc Zero Gate Voltage Drain Leakage Current (VDS = 100 Vdc, VGS = 0 Vdc) IDSS — — 20 Adc Gate Threshold Voltage (VDS = 10 Vdc, ID = 200 Adc) VGS(th) 0.9 1.6 2.4 Vdc Gate Quiescent Voltage (VDD = 50 Vdc, ID = 350 mAdc, Measured in Functional Test) VGS(Q) 2.0 2.7 3.5 Vdc Drain--Source On--Voltage (VGS = 10 Vdc, ID = 0.5 Adc) VDS(on) — 0.2 — Vdc Reverse Transfer Capacitance (VDS = 50 Vdc 30 mV(rms)ac @ 1 MHz, VGS = 0 Vdc) Crss — 41 — pF Output Capacitance (VDS = 50 Vdc 30 mV(rms)ac @ 1 MHz, VGS = 0 Vdc) Coss — 65.4 — pF Input Capacitance (4) (VDS = 50 Vdc, VGS = 0 Vdc 30 mV(rms)ac @ 1 MHz) Ciss — 591 — pF Characteristic Off Characteristics Gate--Source Leakage Current (VGS = 5 Vdc, VDS = 0 Vdc) Drain--Source Breakdown Voltage (ID = 50 mA, VGS = 0 Vdc) On Characteristics Dynamic Characteristics 1. Continuous use at maximum temperature will affect MTTF. 2. MTTF calculator available at http://www.freescale.com/rf. Select Software & Tools/Development Tools/Calculators to access MTTF calculators by product. 3. Refer to AN1955, Thermal Measurement Methodology of RF Power Amplifiers. Go to http://www.freescale.com/rf. Select Documentation/Application Notes -- AN1955. 4. Part internally input matched. (continued) MRF6V3090N MRF6V3090NB 2 RF Device Data Freescale Semiconductor, Inc. Table 5. Electrical Characteristics (TA = 25C unless otherwise noted) (continued) Characteristic Symbol Min Typ Max Unit Functional Tests (In Freescale DVB--T Narrowband Test Fixture, 50 ohm system) VDD = 50 Vdc, IDQ = 350 mA, Pout = 18 W Avg., f = 860 MHz, DVB--T (8k OFDM) Single Channel. ACPR measured in 7.61 MHz Channel Bandwidth @ 4 MHz Offset @ 4 kHz Bandwidth. Power Gain Gps 21.0 22.0 24.0 dB Drain Efficiency D 27.5 28.5 — % ACPR — --62.0 --60.0 dBc IRL — --14 --9 dB Adjacent Channel Power Ratio Input Return Loss Table 6. Ordering Information Device MRF6V3090NR1 MRF6V3090NBR1 MRF6V3090NR5 MRF6V3090NBR5 Tape and Reel Information R1 Suffix = 500 Units, 44 mm Tape Width, 13--inch Reel R5 Suffix = 50 Units, 56 mm Tape Width, 13--inch Reel Package TO--270WB--4 TO--272WB--4 TO--270WB--4 TO--272WB--4 MRF6V3090N MRF6V3090NB RF Device Data Freescale Semiconductor, Inc. 3 VBIAS C8 + C1 R1 C2 Z2 Z3 Z4 Z5 Z6 Z9 Z12 Z13 Z14 Z15 Z16 Z17 Z7 C5 C7 Z18 RF OUTPUT C14 C15 C6 C10 Z10 C4 R2 Z1 C9 C3 Z8 RF INPUT VSUPPLY + C11 C12 C13 DUT Z11 + C16 Z1 Z2 Z3 Z4 Z5 Z6 Z7 Z8 Z9 0.266 0.067 Microstrip 0.331 0.067 Microstrip 0.598 0.067 Microstrip 0.315 0.276 Microstrip 0.054 0.669 Microstrip 0.419 0.669 Microstrip 0.256 0.669 Microstrip 0.986 0.071 Microstrip 0.201 0.571 Microstrip Z10, Z11 Z12 Z13 Z14 Z15 Z16 Z17 Z18 C17 C18 1.292 0.079 Microstrip 0.680 0.571 Microstrip 0.132 0.117 Microstrip 0.705 0.117 Microstrip 0.159 0.117 Microstrip 0.140 0.067 Microstrip 0.077 0.067 Microstrip 0.163 0.067 Microstrip Figure 2. MRF6V3090N 860 MHz Narrowband Test Circuit Schematic Table 7. MRF6V3090N 860 MHz Narrowband Test Circuit Component Designations and Values Part Description Part Number Manufacturer C1 22 F, 35 V Tantalum Capacitor T491X226K035AT Kermet C2, C9, C17 10 F, 50 V Chip Capacitors GRM55DR61H106KA88L Murata C3, C5, C8, C14, C16 43 pF Chip Capacitors ATC100B430JT500XT ATC C4 6.2 pF Chip Capacitor ATC100B6R2BT500XT ATC C6 2.2 pF Chip Capacitor ATC100B2R2JT500XT ATC C7 9.1 pF Chip Capacitor ATC100B9R1CT500XT ATC C10, C18 220 F, 100 V Electrolytic Capacitors EEVFK2A221M Panasonic--ECG C11, C15 7.5 pF Chip Capacitors ATC100B7R5CT500XT ATC C12 3.0 pF Chip Capacitor ATC100B3R0CT500XT ATC C13 0.7 pF Chip Capacitor ATC100B0R7BT500XT ATC R1 10 k, 1/4 W Chip Resistor CRCW120610KOJNEA Vishay R2 10 , 1/4 W Chip Resistor CRCW120610ROJNEA Vishay PCB 0.030, r = 3.5 RF--35 Taconic MRF6V3090N MRF6V3090NB 4 RF Device Data Freescale Semiconductor, Inc. -C1 C10 C8 C2 C3 C4 C5 C6 C7 MRF6V3090N Rev. 0 C11 R2 C15 CUT OUT AREA R1 C9 C16 C14 C12 C13 C17 C18 -- Figure 3. MRF6V3090N 860 MHz Narrowband Test Circuit Component Layout MRF6V3090N MRF6V3090NB RF Device Data Freescale Semiconductor, Inc. 5 TYPICAL CHARACTERISTICS 24 Ciss 70 VDD = 50 Vdc, IDQ = 350 mA, f = 860 MHz Coss Crss 0 10 20 50 21 40 20 30 19 20 D 10 17 40 30 22 18 Measured with 30 mV(rms)ac @ 1 MHz, VGS = 0 Vdc 10 50 10 1 100 0 200 VDS, DRAIN--SOURCE VOLTAGE (VOLTS) Pout, OUTPUT POWER (WATTS) Figure 4. Capacitance versus Drain--Source Voltage Figure 5. CW Power Gain and Drain Efficiency versus Output Power (Narrowband Test Circuit) 56 P3dB = 51.28 dBm (134.3 W) 55 54 53 52 25 Ideal 24 P2dB = 51.06 dBm (127.6 W) 23 P1dB = 50.7 dBm (117.5 W) Actual 51 50 49 48 --6 --5 --4 --3 --1 --2 1 0 2 3 22 21 20 19 50 V 18 45 V 17 VDD = 50 Vdc, IDQ = 350 mA, f = 860 MHz 47 IDQ = 350 mA, f = 860 MHz VDD = 40 V 16 4 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 Pin, INPUT POWER (dBm) Pout, OUTPUT POWER (WATTS) Figure 6. CW Output Power versus Input Power (Narrowband Test Circuit) Figure 7. CW Power Gain versus Output Power (Narrowband Test Circuit) 25 VDD = 50 Vdc, IDQ = 350 mA, f = 860 MHz TC = --30_C Gps, POWER GAIN (dB) 24 60 Gps 23 TC = --30_C 85_C 50 25_C 22 40 21 85_C 30 25_C D 20 20 10 19 18 70 1 10 100 D, DRAIN EFFICIENCY (%) Pout, OUTPUT POWER (dBm) Gps, POWER GAIN (dB) 100 60 Gps Gps, POWER GAIN (dB) C, CAPACITANCE (pF) 23 D, DRAIN EFFICIENCY (%) 1000 0 200 Pout, OUTPUT POWER (WATTS) Figure 8. CW Power Gain and Drain Efficiency versus Output Power (Narrowband Test Circuit) MRF6V3090N MRF6V3090NB 6 RF Device Data Freescale Semiconductor, Inc. TYPICAL CHARACTERISTICS — TWO--TONE (NARROWBAND TEST CIRCUIT) --20 IMD, INTERMODULATION DISTORTION (dBc) IMD, INTERMODULATION DISTORTION (dBc) --10 VDD = 50 Vdc, IDQ = 350 mA, f1 = 854 MHz f2 = 860 MHz, Two--Tone Measurements --20 --30 3rd Order --40 5th Order --50 --60 7th Order --70 10 1 100 --30 3rd Order --35 --40 5th Order --45 --50 --55 7th Order --60 --65 200 1 90 10 Pout, OUTPUT POWER (WATTS) PEP TWO--TONE SPACING (MHz) Figure 9. Intermodulation Distortion Products versus Output Power Figure 10. Intermodulation Distortion Products versus Two--Tone Spacing 23.5 IMD, THIRD ORDER INTERMODULATION DISTORTION (dBc) --10 23 Gps, POWER GAIN (dB) VDD = 50 Vdc, Pout = 90 W (PEP), IDQ = 350 mA f = 860 MHz, Two--Tone Measurements --25 IDQ = 450 mA 22.5 22 350 mA 21.5 300 mA 21 250 mA VDD = 50 Vdc, f1 = 854 MHz, f2 = 860 MHz Two--Tone Measurements, 6 MHz Tone Spacing 20.5 VDD = 50 Vdc, f1 = 854 MHz, f2 = 860 MHz Two--Tone Measurements, 6 MHz Tone Spacing --20 --30 IDQ = 250 mA --40 300 mA --50 1 10 100 Pout, OUTPUT POWER (WATTS) PEP Figure 11. Two--Tone Power Gain versus Output Power 200 450 mA 350 mA --60 20 1 10 100 200 Pout, OUTPUT POWER (WATTS) PEP Figure 12. Third Order Intermodulation Distortion versus Output Power MRF6V3090N MRF6V3090NB RF Device Data Freescale Semiconductor, Inc. 7 TYPICAL CHARACTERISTICS — DVB--T (8k OFDM) 100 --20 7.61 MHz --30 10 --50 DVB--T (8k OFDM) 64 QAM Data Carrier Modulation 5 Symbols 0.01 --90 --110 2 0 4 6 8 10 12 --3 --2 --1 0 1 2 3 4 Figure 13. Single--Carrier DVB--T (8k OFDM) Figure 14. DVB--T (8k OFDM) Spectrum 350 mA 300 mA VDD = 50 Vdc, f = 860 MHz DVB--T (8k OFDM), 64 QAM Data Carrier Modulation, 5 Symbols 20.5 10 1 40 --54 VDD = 50 Vdc, f = 860 MHz --56 DVB--T (8k OFDM), 64 QAM Data Carrier Modulation, 5 Symbols --58 --60 IDQ = 250 mA --62 300 mA --64 350 mA --66 450 mA --68 Gps, POWER GAIN (dB) Figure 16. Single--Carrier DVB--T (8k OFDM) ACPR versus Output Power (Narrowband Test Circuit) 50 --30_C VDD = 50 Vdc, IDQ = 350 mA f = 860 MHz, DVB--T (8k OFDM) 64 QAM Data Carrier Modulation 5 Symbols 85_C --45 --50 D 25_C 30 20 --55 85_C Gps --60 TC = --30_C 25_C ACPR --65 10 0 --70 1 40 Pout, OUTPUT POWER (WATTS) AVG. Figure 15. Single--Carrier DVB--T (8k OFDM) Power Gain versus Output Power (Narrowband Test Circuit) D, DRAIN EFFICIENCY (%) 10 1 Pout, OUTPUT POWER (WATTS) AVG. 40 5 ACPR, ADJACENT CHANNEL POWER RATIO (dBc) 250 mA ACPR, ADJACENT CHANNEL POWER RATIO (dBc) Gps, POWER GAIN (dB) --4 f, FREQUENCY (MHz) 22.5 21 --5 PEAK--TO--AVERAGE (dB) IDQ = 450 mA 21.5 DVB--T (8k OFDM) 64 QAM Data Carrier Modulation, 5 Symbols --100 23 22 4 kHz BW ACPR Measured at 4 MHz Offset from Center Frequency --70 --80 0.001 0.0001 4 kHz BW --60 0.1 (dB) PROBABILITY (%) --40 1 10 40 Pout, OUTPUT POWER (WATTS) AVG. Figure 17. Single--Carrier DVB--T (8k OFDM) Drain Efficiency, Power Gain and ACPR versus Output Power (Narrowband Test Circuit) MRF6V3090N MRF6V3090NB 8 RF Device Data Freescale Semiconductor, Inc. TYPICAL CHARACTERISTICS 109 VDD = 50 Vdc Pout = 18 W Avg. D = 28.5% MTTF (HOURS) 108 107 106 105 104 90 110 130 150 170 190 210 230 250 TJ, JUNCTION TEMPERATURE (C) MTTF calculator available at http://www.freescale.com/rf. Select Software & Tools/Development Tools/Calculators to access MTTF calculators by product. Figure 18. MTTF versus Junction Temperature -- CW VDD = 50 Vdc, IDQ = 350 mA, Pout = 18 W Average f MHz Zsource Zload 860 1.58 -- j0.89 3.51 -- j3.98 Zsource = Test circuit impedance as measured from gate to ground. Zload = Test circuit impedance as measured from drain to ground. Output Matching Network Device Under Test Input Matching Network Z source Z load Figure 19. Series Equivalent Source and Load Impedance (Narrowband Test Circuit) MRF6V3090N MRF6V3090NB RF Device Data Freescale Semiconductor, Inc. 9 470--860 MHz BROADBAND REFERENCE CIRCUIT VDD = 50 Volts, IDQ = 450 mA, Channel Bandwidth = 8 MHz, Input Signal PAR = 9.5 dB @ 0.01% Probability on CCDF. Signal Type Pout (W) f (MHz) Gps (dB) D (%) Output PAR (dB) IMD Shoulder (dBc) DVB--T (8k OFDM) 4.5 Avg. 470 21.5 11.6 9.9 --37.5 650 22.8 11.8 9.9 --41.7 860 21.8 11.9 9.8 --40.3 470 21.6 18.2 9.5 --37.4 650 22.8 18.6 9.7 --40.2 860 21.8 18.9 9.5 --39.0 470 21.6 26.8 8.6 --31.8 650 22.9 28.0 8.7 --34.4 860 21.9 28.3 7.9 --29.2 9 Avg. 18 Avg. R1 VDD VGG C14 C15 C16 C17 C13 C20 C5 C4 C7 C1 C12 C9 C2 C8 C6 C18 C19 C3 C11 C10 Q1 MRF6V3090N Rev. 2 Figure 20. MRF6V3090N 470--860 MHz Broadband 2 3 Compact Reference Circuit Component Layout MRF6V3090N MRF6V3090NB 10 RF Device Data Freescale Semiconductor, Inc. 470--860 MHz BROADBAND REFERENCE CIRCUIT Table 8. MRF6V3090N 470--860 MHz Broadband 2 3 Reference Circuit Component Designations and Values Part Description Part Number Manufacturer C1, C12 100 pF Chip Capacitors ATC100B101JT500XT ATC C2 1.8 pF Chip Capacitor ATC100B1R8BT500XT ATC C3 6.2 pF Chip Capacitor ATC100B6R2BT500XT ATC C4, C5, C6 13 pF Chip Capacitors ATC100B130JT500XT ATC C7, C8, C11 2.2 pF Chip Capacitors ATC100B2R2JT500XT ATC C9 15 pF Chip Capacitor ATC100B150JT500XT ATC C10 3.9 pF Chip Capacitor ATC100B3R9CT500XT ATC C13 47 F, 16 V Tantalum Capacitor T491D476K016AS Kemet C14, C17, C19 2.2 F, 100 V Chip Capacitors C3225X7R2A225KT TDK C15, C16, C18 220 pF Chip Capacitors ATC100B221JT200XT ATC C20 470 F, 63 V Electrolytic Capacitor MCGPR63V477M13X26--RH Multicomp Q1 RF High Power Transistor MRF6V3090NBR1 Freescale R1 10 , 1/4 W Chip Resistor CRCW120610RJ Vishay PCB 0.030, r = 3.5 RO4350B Rogers MRF6V3090N MRF6V3090NB RF Device Data Freescale Semiconductor, Inc. 11 TYPICAL CHARACTERISTICS — 470--860 MHz BROADBAND REFERENCE CIRCUIT 23 Gps, POWER GAIN (dB) 60 VDD = 50 Vdc, IDQ = 450 mA, DVB--T (8k OFDM) 64 QAM Data Carrier Modulation, 5 Symbols 50 Gps 22 Pout = 4.5 W 9W 18 W 21 40 30 18 W D 20 D, DRAIN EFFICIENCY (%) 24 20 9W 19 4.5 W 18 450 500 550 600 650 700 750 800 10 0 900 850 f, FREQUENCY (MHz) Figure 21. Single--Carrier DVB--T (8k OFDM) Power Gain and Drain Efficiency versus Frequency (Broadband Reference Circuit) 12 0 Pout = 4.5 W OUTPUT PAR (dB) 10 9W 9 PAR 8 18 W 7 6 18 W IMD(1) 5 9W 4 3 450 4.5 W 495 540 585 630 675 720 765 810 855 --5 --10 --15 --20 --25 --30 --35 IMD, INTERMODULATION DISTORTION SHOULDER (dBc) VDD = 50 Vdc, IDQ = 450 mA, DVB--T (8k OFDM) 11 64 QAM Data Carrier Modulation, 5 Symbols --40 --45 900 f, FREQUENCY (MHz) (1) Intermodulation distortion shoulder measurement made using delta marker at 4.2 MHz offset from center frequency. Figure 22. Single--Carrier DVB--T (8k OFDM) Output PAR and IMD Shoulder versus Frequency (Broadband Reference Circuit) 70 VDD = 50 Vdc, IDQ = 450 mA Pulse Width = 100 sec, 10% Duty Cycle 25 620 MHz Gps, POWER GAIN (dB) 860 MHz 24 Gps 620 MHz 23 740 MHz 22 860 MHz 30 20 D 1 40 30 20 19 50 470 MHz 470 MHz 21 60 740 MHz 10 10 100 D DRAIN EFFICIENCY (%) 26 0 200 Pout, OUTPUT POWER (WATTS) PULSED Figure 23. Pulsed Power Gain and Drain Efficiency versus Output Power (Broadband Reference Circuit) MRF6V3090N MRF6V3090NB 12 RF Device Data Freescale Semiconductor, Inc. PACKAGE DIMENSIONS MRF6V3090N MRF6V3090NB RF Device Data Freescale Semiconductor, Inc. 13 MRF6V3090N MRF6V3090NB 14 RF Device Data Freescale Semiconductor, Inc. MRF6V3090N MRF6V3090NB RF Device Data Freescale Semiconductor, Inc. 15 MRF6V3090N MRF6V3090NB 16 RF Device Data Freescale Semiconductor, Inc. MRF6V3090N MRF6V3090NB RF Device Data Freescale Semiconductor, Inc. 17 MRF6V3090N MRF6V3090NB 18 RF Device Data Freescale Semiconductor, Inc. PRODUCT DOCUMENTATION, SOFTWARE AND TOOLS Refer to the following documents, software and tools to aid your design process. Application Notes AN1907: Solder Reflow Attach Method for High Power RF Devices in Over--Molded Plastic Packages AN1955: Thermal Measurement Methodology of RF Power Amplifiers AN3263: Bolt Down Mounting Method for High Power RF Transistors and RFICs in Over--Molded Plastic Packages AN3789: Clamping of High Power RF Transistors and RFICs in Over--Molded Plastic Packages Engineering Bulletins EB212: Using Data Sheet Impedances for RF LDMOS Devices Software Electromigration MTTF Calculator RF High Power Model .s2p File For Software and Tools, do a Part Number search at http://www.freescale.com, and select the “Part Number” link. Go to the Software & Tools tab on the part’s Product Summary page to download the respective tool. REVISION HISTORY The following table summarizes revisions to this document. Revision Date Description 0 Apr. 2010 Initial Release of Data Sheet 1 Dec. 2011 Changed “DVB--T OFDM” to “DVB--T (8k OFDM)” throughout Fig. 6, CW Output Power versus Input Power: corrected typographical error in dBm to watts conversion values, p. 5 Fig. 7, CW Power Gain versus Output Power (Narrowband Test Circuit): adjusted x--axis scale from 0 to 140 watts to 10 to 150 watts, p. 5 Updated Fig. 9, Intermodulation Distortion Products versus Output Power, to correct X--axis PEP power values, p. 6 Fig. 10, Intermodulation Distortion Products versus Two--Tone Spacing: added f = 860 MHz to graph callouts, p. 6 Updated Fig. 11, Two--Tone Power Gain versus Output Power, to correct X--axis PEP power values, p. 6 Updated Fig. 12, Third Order Intermodulation Distortion versus Output Power, to correct X--axis PEP power values, p. 6 Fig. 18, MTTF versus Junction Temperature -- CW: MTTF end temperature on graph changed to match maximum operating junction temperature, p. 8 Fig. 19, Series Equivalent Source and Load Impedance: removed plot, p. 9 Added 470--860 MHz Broadband Reference Circuit frequency table, p. 9 Added Fig. 20, 470--860 MHz Broadband 2 3 Compact Reference Circuit Component Layout, p. 9 Added Table 7, 470--860 MHz Broadband 2 3 Reference Circuit Component Designations and Values, p. 10 Added Fig. 21, Single--Carrier DVB--T (8k OFDM) Power Gain and Drain Efficiency versus Frequency (Broadband Reference Circuit), p. 11 Added Fig. 22, Single--Carrier DVB--T (8k OFDM) Output PAR and IMD Shoulder versus Frequency (Broadband Reference Circuit), p. 11 Added Fig. 23, Pulsed Power Gain and Drain Efficiency versus Output Power (Broadband Reference Circuit), p. 11 2 Oct. 2015 Added L--Band 960--1215 MHz performance data, p. 1 Replaced Case Outline TO--270WB--4 Issue D with Issue E, p. 1, 13–15. Added notes 9 and 10, four exposed source tabs, and a feature control frame to E and E5 on p. 13. Removed style and pin information from notes section on p. 15. MRF6V3090N MRF6V3090NB RF Device Data Freescale Semiconductor, Inc. 19 How to Reach Us: Home Page: freescale.com Web Support: freescale.com/support Information in this document is provided solely to enable system and software implementers to use Freescale products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits based on the information in this document. Freescale reserves the right to make changes without further notice to any products herein. Freescale makes no warranty, representation, or guarantee regarding the suitability of its products for any particular purpose, nor does Freescale assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters that may be provided in Freescale data sheets and/or specifications can and do vary in different applications, and actual performance may vary over time. All operating parameters, including “typicals,” must be validated for each customer application by customer’s technical experts. Freescale does not convey any license under its patent rights nor the rights of others. Freescale sells products pursuant to standard terms and conditions of sale, which can be found at the following address: freescale.com/SalesTermsandConditions. Freescale and the Freescale logo are trademarks of Freescale Semiconductor, Inc., Reg. U.S. Pat. & Tm. Off. All other product or service names are the property of their respective owners. E 2010--2011, 2015 Freescale Semiconductor, Inc. MRF6V3090N MRF6V3090NB Document Number: MRF6V3090N Rev. 2, 10/2015 20 RF Device Data Freescale Semiconductor, Inc.