Material Content Data Sheet Umbrella Spec Date Revision Construction element chip Base plate and substrate including metallisation wire encapsulation housing lead, finish and plating TIM PP2 PrimePACK2 TM with TIM 2014-07-01 6.0 Material group Average CAS-Nr. Sum [%] if applicable mass [%]* inorganic material silicon 7440-21-3 0,6 0,6 non noble metal inorganic material non noble metal non noble metal noble metal non noble metal polymers 7440-50-8 1344-28-1 7440-31-5 7440-02-0 7440-22-4 7429-90-5 50,2 1,6 2,9 54,9 polymers inorganic material plastics plastics inorganic material non noble metal ferrous metal non noble metal non noble metal non noble metal non noble metal inorganic material polymers polymers non noble metal smd (including thermistors, resistors and shunts) inorganic material non noble metal non noble metal noble metal deviation <25% Weight range of product Fluctuation margin Materials RoHS compliant copper aluminium oxide tin nickel silver aluminium silicone gel Polyamid (PA) antimonypentoxide brominated resin chlorinated resin silicondioxide / glasfiber copper steel zinc nickel aluminium zinc oxid silicon hydrocarbon co-oligomer hydrocarbon waxes titanium lead oxide copper tin silver 1309-64-4 YES Traces X X 0,2 10,2 10,8 0,7 0,3 10,2 classifications: NF F16-101 fire & smoke: I2 / F3 CEN/TS 45545: R25: HL3 R24: HL1 R23:- 18,2 X 7440-50-8 11121-90-7 7440-66-6 7440-02-0 7429-90-5 1314-13-2 7440-21-3 6,4 11,7 4,4 16,1 X X X X X X X X 61417-49-0 1317-36-8 7440-50-8 7440-31-5 7440-22-4 0,006 RoHS compliant; according to exception 7c.I 0,006 X X X Sum in total 100,0 841 <25% *) related to component weight **) Weight of particular product, see technical product information Important Remarks: 1) This document provides full declaration of all materials present in Infineon products above a threshold of 0,1 % b.w. (1000 ppm). 2) Trace concentrations (i.e. < 0,1 % b.w) present in products are marked with an "X" as far as they represent substances-of-concern. A list of substances-of-concern can be found at http://www.infineon.com/soc. 3) All statements are based on our present knowledge and are subject to change at any time due to technical requirements and development. 4) Infineon products are not classified as "hazardous substances" according to the definition in the EU Directive 67/548/EC and do therefore not require Material Safety Data Sheets. Company Address Internet Comment Infineon Technologies 81726 München www.infineon.com