Download SITRANS FCS200 Catalog specification sheet

© Siemens AG 2016
Flow Measurement
SITRANS F C
Flow sensor SITRANS FCS200
■ Overview
■ Function
The flow measuring principle is based on the Coriolis effect. See
"System information SITRANS F C".
■ Integration
The complete flowmeter consists of the sensor (SITRANS
FCS200) and a transmitter SITRANS F C MASS 6000 or SIFLOW
FC070. All communication options are available for MASS 6000.
The sensor is shipped with a SENSORPROM memory unit containing all information about calibration data, device identity and
factory pre-programming of transmitter settings.
Installation guidelines
Siemens Flow Instruments recommends installing the sensor in
one of the following ways:
SITRANS FCS200 (DN10, DN 15 and DN 25) is a Coriolis sensor
specialized for accurate mass flow measurement of gases.
The sensor offers superior performance in terms of flow accuracy and turn down ratio. The ultra compact sensor design
makes installation, replacement and commissioning very
straight forward and easy.
■ Benefits
• High accuracy gas measurement
• Approved for use in hazardous area
• DN 10 and DN 15 is custody transfer approved, according to
OIML R 139 (Compressed gaseous fuel measuring systems
for vehicles). For custody transfer applications SIFLOW
FC070 Ex CT must be used.
• Self-draining in vertical orientation
• Pt1000 temperature measurement for optimum accuracy
• SENSORPROM enabling true "plug & play"
• Rigid enclosure design reducing influence from pipeline vibration and thermal stress
• High-pressure measurement up to 350 bar (5076 psi)
• Ultra compact sensor design with space-saving split flow
Vertical orientation with an upwards flow
■ Application
SITRANS FCS200 is designed for measurement of gases and is
suitable for use in the oil and gas industry:
• Filling of gas bottles
• CNG dispensers
• Metering of general gas applications
Horizontal installation, tubes up
■ Design
SITRANS FCS200 is available in DN 10, DN 15 and DN 25.
Horizontal installation, tubes sideways
The sensor consists of 2 parallel measuring pipes, welded directly onto a flow splitter at each end of the sensor to eliminate a
direct coupling to the process connectors and significantly reduce effects from external vibrations. The flow-splitters are
welded directly onto a rigid sensor housing which acts as a mechanical low pass filter.
The SITRANS FCS200 DN 10 and DN 15 wetted parts material is
Hastelloy C22, and the DN 25 wetted parts material is AISI
316Ti/1.4571. The enclosure is made of stainless steel
AISI 316L/1.4404 with a grade of encapsulation of IP67.
The two black rupture discs are designed to protect the
enclosure from overpressure.
Siemens FI 01 · 2016
3/205
3
© Siemens AG 2016
Flow Measurement
SITRANS F C
Flow sensor SITRANS FCS200
■ Technical specifications
Sensor size
■ Characteristic curves
DN 10
DN 15
DN 25
DN 10
Mass Flow
3
Accuracy [% of rate]
 0.5
Repeatability [% of rate]
 0.25
Max. zero point error
[kg/h (lb/h)]
0.25 (0.55)
Measuring range
[kg/min (lb/min)]
0 … 42
(0 … 92.6)
bar
2.5
1.2 (2.65)
3.0 (6.6)
2.0
0 … 200
0 … 500
(0 … 440.9) (0 … 1102.3)
Process temperature
-40 ... +125 °C (-40 ... +257 °F)
Ambient temperature
-40 ... +60 °C (-40 ... +140 °F)
Temperature error
Pressure [bar (psi)]
1.5
1.0
0.5 °C (0.9 °F)
350 (5076)
Enclosure grade
350 (5076)
0.5
214 (3104)
0
IP66/IP67 (EN 60529)
0
200
0
500 1000 1500 2000 2500 3000 3500 [kg/h]
400
600
800 1000 1200 1400 [kg/h]
Material
Measuring pipe
Hastelloy
C22/2.4602
Hastelloy
C22/2.4602
Splitter
Hastelloy
C22/2.4602
Stainless
Stainless
steel AISI
steel AISI
316L/1.4571 316L/1.4571
Enclosure and connection
(flanges)
Connection thread
Weight approx.
Stainless
steel AISI
316L/1.4571
DN 15
bar
1.2
1.0
Stainless steel
0.8
¼" NPT
½" NPT
½" VCO
½" NPT
¾" NPT
1" NPT
¾" VCO
1" NPT
1½" NPT
1" VCO
0.6
2.8 kg
(6.2 lb)
6.0 kg
(13.2 lb)
11 kg
(24.2 lb)
0.2
0.4
0
Ex approvals
ATEX
II 1/2 G Ex ia IIC T5/T4 Ga/Gb
IECEx
Ex ia IIC T5/T4 Ga/Gb
DN 25
0Ex ia IIC T4/T5 Gb
EAC Ex
FM
Class I, Div 1, Groups A, B, C and D
bar
3.5
PTB Germany approval nr: 5.4.11/11.22
OIML R 139 - Compressed gaseous fuel
measuring systems for vehicles
NTEP for USA and Canada, approval no:
97-111A3
3.0
Custody transfer approvals
DN 10/DN 15
2.5
2.0
1.5
1.0
0.5
0
0
5000
10000
15000
20000
25000 [kg/h]
The pressure drop as a function of capacity for CNG with a pressure of 200 bar (2900 psi) and an ambient temperature of 20 °C
(68 °F).
3/206
Siemens FI 01 · 2016
© Siemens AG 2016
Flow Measurement
SITRANS F C
Flow sensor SITRANS FCS200
Operating instructions for SITRANS FCS200
Article No.
Selection and Ordering data
SITRANS F C Flow sensors
SITRANS FCS200 sensor, without heating
jacket
7 ME 4 5 0 0 7 77 7 7 - 7 7 7 7
Article No.
• English
A5E02508199
• German
A5E03082574
This device is shipped with a Quick Start guide and a CD containing
further SITRANS F iterature.
Click on the Article No. for the online configuration in the PIA Life Cycle Portal.
Sensor size and material
DN 10, Hastelloy C22/2.4602
DN 15, Hastelloy C22/2.4602
DN 25, Stainless steel AISI 316Ti/1.4571
Description
All literature is available to download for free, in a range of languages, at
www.siemens.com/processinstrumentation/documentation
2D
2E
1F
Pressure
PN 214 (DN 25)
PN 350 (DN 10 and DN 15)
Spare parts
K
N
Process connection/flange
½“/VCO
¾“/VCO
1“/VCO
71
72
73
¼“/NPT pipe thread
½“/NPT pipe thread
81
82
¾“/NPT pipe thread
1“/NPT pipe thread
1½“/NPT pipe thread
83
84
85
Configuration
PTB custody transfer approval
NTEP custody transfer approval
Description
Article No.
Multiple plug for cable mounting
FDK:083H5056
2 kB SENSORPROM unit
(Sensor Serial No. and Article No. must
be specified by ordering)
FDK:083H4410
1
2
Transmitter
A
None
Cable
No cable
A
Calibration
Standard calibration
1
Order code
Selection and Ordering data
Additional information
Please add “-Z“ to Article No. and specify Order
code(s) and plain text.
Pressure testing certificate PED: 2014/68/EU
C11
Material certificate EN 10204-3.1
C12
NDT-Penetrant inspection report ISO 3452
C13
Factory certificate according to EN 10204 2.2
C14
Factory certificate according to EN 10204 2.1
C15
Tag name plate, stainless steel
Y17
Accessories
Article No.
Description
Cable with multiple plug
Standard blue cable between
SIFLOW FC070/MASS 6000 and
FCS200,
5 x 2 x 0.34 mm2 twisted and screened
in pairs.
Temperature range -20 °C ... +110 °C
(-4 °F ... +230 °F)
5 m (16.4 ft)
FDK:083H3015
10 m (32.8 ft) FDK:083H3016
25 m (82 ft)
FDK:083H3017
50 m (164 ft) FDK:083H3018
75 m (246 ft) FDK:083H3054
150 m (492 ft) FDK:083H3055
Siemens FI 01 · 2016
3/207
3
© Siemens AG 2016
Flow Measurement
SITRANS F C
Flow sensor SITRANS FCS200
■ Dimensional drawings
SITRANS FCS200, DN 10 ... DN 15
3
SITRANS FCS200, DN 10 ... DN 15, dimensions in mm (inch)
Position
DN 10 with NPT DN 10 with VCO DN 15
connectors
connectors
mm (inch)
mm (inch)
mm (inch)
(1)
350 (13.78)
330 (12.99)
450 (17.72)
(2)
72 (2.84)
72 (2.84)
72 (2.84)
(3)
100 (3.94)
100 (3.94)
148 (5.83)
(4)
204 (8.03)
204 (8.03)
253 (9.96)
(5)
40 (1.57)
40 (1.57)
48 (1.89)
3/208
Siemens FI 01 · 2016
© Siemens AG 2016
Flow Measurement
SITRANS F C
Flow sensor SITRANS FCS200
SITRANS FCS200, DN 25
DN 25 - NPT
3
DN 25 - VCO
SITRANS FCS200, DN 25, dimensions in mm (inch)
Position
DN 25
DN 25
with NPT connection with VCO connection
mm (inch)
mm (inch)
(1)
520 (20.47)
550 (21.65)
(2)
72 (2.84)
72 (2.84)
(3)
200 (7.87)
200 (7.87)
(4)
357 (14.77)
357 (14.77)
(5)
74 (2.91)
74 (2.91)
(6)
80 (3.15)
80 (3.15)
(7)
125 (4.92)
125 (4.92)
(8)
32 (1.26)
32 (1.26)
Siemens FI 01 · 2016
3/209