NSS20500UW3 20 V, 7.0 A, Low VCE(sat) PNP Transistor ON Semiconductor’s e2 PowerEdge family of low VCE(sat) transistors are miniature surface mount devices featuring ultra low saturation voltage (VCE(sat)) and high current gain capability. These are designed for use in low voltage, high speed switching applications where affordable efficient energy control is important. Typical applications are DC−DC converters and power management in portable and battery powered products such as cellular and cordless phones, PDAs, computers, printers, digital cameras and MP3 players. Other applications are low voltage motor controls in mass storage products such as disc drives and tape drives. In the automotive industry they can be used in air bag deployment and in the instrument cluster. The high current gain allows e2PowerEdge devices to be driven directly from PMU’s control outputs, and the Linear Gain (Beta) makes them ideal components in analog amplifiers. • This is a Pb−Free Device http://onsemi.com −20 VOLTS 7.0 AMPS PNP LOW VCE(sat) TRANSISTOR EQUIVALENT RDS(on) 50 mW COLLECTOR 3 1 BASE MAXIMUM RATINGS (TA = 25°C) Rating Symbol Max Unit Collector-Emitter Voltage VCEO −20 Vdc Collector-Base Voltage VCBO −20 Vdc Emitter-Base Voltage VEBO −7.0 Vdc IC −5.0 Adc Collector Current − Peak ICM −7.0 A Electrostatic Discharge ESD HBM Class 3B MM Class C Collector Current − Continuous 2 EMITTER 3 1 MARKING DIAGRAM THERMAL CHARACTERISTICS Characteristic Symbol Max Unit PD 875 7.0 mW mW/°C RqJA 143 °C/W PD 1.5 11.8 W mW/°C Thermal Resistance, Junction−to−Ambient (Note 2) RqJA 85 °C/W Thermal Resistance, Junction−to−Lead #1 (Note 2) RqJL 23 °C/W Total Device Dissipation (Single Pulse < 10 sec) (Notes 2, 3) PDsingle 3.0 W Junction and Storage Temperature Range TJ, Tstg −55 to +150 °C TC −55 to +125 °C Total Device Dissipation, TA = 25°C Derate above 25°C (Note 1) Thermal Resistance, Junction−to−Ambient (Note 1) Total Device Dissipation, TA = 25°C Derate above 25°C (Note 2) Operating Case Temperature (Note 1) WDFN3 CASE 506AU 2 VC M G 1 VC = Specific Device Code M = Date Code G = Pb−Free Package ORDERING INFORMATION Device Package Shipping† NSS20500UW3T2G WDFN3 (Pb−Free) 3000/ Tape & Reel NSS20500UW3TBG WDFN3 (Pb−Free) 3000/ Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. FR−4 @ 100 mm2, 1 oz copper traces. 2. FR−4 @ 500 mm2, 1 oz copper traces. 3. Thermal response. © Semiconductor Components Industries, LLC, 2012 November, 2012 − Rev. 3 1 Publication Order Number: NSS20500UW3/D NSS20500UW3 ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristic Symbol Min Typical Max −20 − − −20 − − −7.0 − − − − −0.1 − − −0.1 250 250 220 200 180 − − 300 300 250 − − − − − − − − − − − −0.010 −0.050 −0.080 −0.150 −0.200 −0.270 −0.015 −0.070 −0.100 −0.170 −0.240 −0.260 − 0.76 −0.900 − 0.80 −0.900 100 − − Unit OFF CHARACTERISTICS Collector −Emitter Breakdown Voltage (IC = −10 mAdc, IB = 0) V(BR)CEO Collector −Base Breakdown Voltage (IC = −0.1 mAdc, IE = 0) V(BR)CBO Emitter −Base Breakdown Voltage (IE = −0.1 mAdc, IC = 0) V(BR)EBO Collector Cutoff Current (VCB = −20 Vdc, IE = 0) ICBO Emitter Cutoff Current (VEB = −7.0 Vdc) IEBO Vdc Vdc Vdc mAdc mAdc ON CHARACTERISTICS hFE DC Current Gain (Note 4) (IC = −10 mA, VCE = −2.0 V) (IC = −500 mA, VCE = −2.0 V) (IC = −1.0 A, VCE = −2.0 V) (IC = −2.0 A, VCE = −2.0 V) (IC = −3.0 A, VCE = −2.0 V) Collector −Emitter Saturation Voltage (Note 4) (IC = −0.1 A, IB = −0.010 A) (Note 5) (IC = −1.0 A, IB = −0.100 A) (IC = −1.0 A, IB = −0.010 A) (IC = −2.0 A, IB = −0.020 A) (IC = −3.0 A, IB = −0.030 A) (IC = −4.0 A, IB = −0.400 A) VCE(sat) Base −Emitter Saturation Voltage (Note 4) (IC = −1.0 A, IB = −0.01 A) VBE(sat) Base −Emitter Turn−on Voltage (Note 4) (IC = −2.0 A, VCE = −3.0 V) VBE(on) Cutoff Frequency (IC = −100 mA, VCE = −5.0 V, f = 100 MHz) fT V V V MHz Input Capacitance (VEB = −0.5 V, f = 1.0 MHz) Cibo − 475 pF Output Capacitance (VCB = −3.0 V, f = 1.0 MHz) Cobo − 180 pF Delay (VCC = −15 V, IC = 750 mA, IB1 = 15 mA) td − − 75 ns Rise (VCC = −15 V, IC = 750 mA, IB1 = 15 mA) tr − − 160 ns Storage (VCC = −15 V, IC = 750 mA, IB1 = 15 mA) ts − − 350 ns Fall (VCC = −15 V, IC = 750 mA, IB1 = 15 mA) tf − − 160 ns SWITCHING CHARACTERISTICS 4. Pulsed Condition: Pulse Width = 300 msec, Duty Cycle ≤ 2%. 5. Guaranteed by design but not tested. http://onsemi.com 2 NSS20500UW3 3.5 0.4 0.3 VCE(sat) = 150°C 0.2 25°C 0.1 −55°C 0 0.001 0.01 1.0 10 1.0 150°C 0.5 25°C 0.01 0.1 1.0 10 Figure 2. Collector Emitter Saturation Voltage vs. Collector Current 1.4 VBE(sat), BASE EMITTER SATURATION VOLTAGE (V) 150°C (2 V) 550 25°C (5 V) 450 350 25°C (2 V) 250 −55°C (5 V) 150 −55°C (2 V) 0.01 0.1 1 1.2 1.0 −55°C 0.8 25°C 0.6 150°C 0.4 0.2 0.001 10 0.01 0.1 10 1.0 IC, COLLECTOR CURRENT (A) IC, COLLECTOR CURRENT (A) Figure 3. DC Current Gain vs. Collector Current Figure 4. Base Emitter Saturation Voltage vs. Collector Current 1.1 VCE = −1.0 V −55°C 0.9 0.8 25°C 0.7 0.6 0.5 150°C 0.4 0.3 0.2 0.1 0.001 VCE(sat) = −55°C 1.5 Figure 1. Collector Emitter Saturation Voltage vs. Collector Current 650 1.0 2.0 0 0.001 150°C (5 V) 50 0.001 2.5 IC, COLLECTOR CURRENT (A) 750 hFE, DC CURRENT GAIN 0.1 IC/IB = 100 3.0 IC, COLLECTOR CURRENT (A) 850 VBE(on), BASE EMITTER TURN−ON VOLTAGE (V) VCE(sat), COLLECTOR EMITTER SATURATION VOLTAGE (V) IC/IB = 10 VCE, COLLECTOR−EMITTER VOLTAGE (V) VCE(sat), COLLECTOR EMITTER SATURATION VOLTAGE (V) 0.5 0.01 0.1 1.0 10 1.0 10 mA 100 mA 300 mA IC = 500 mA 0.8 0.6 0.4 0.2 0 0.01 0.1 1.0 10 IC, COLLECTOR CURRENT (A) IB, BASE CURRENT (mA) Figure 5. Base Emitter Turn−On Voltage vs. Collector Current Figure 6. Saturation Region http://onsemi.com 3 100 NSS20500UW3 260 500 Cobo, OUTPUT CAPACITANCE (pF) Cibo (pF) 450 400 350 300 250 200 0 1.0 2.0 3.0 4.0 5.0 Cobo (pF) 240 220 200 180 160 140 120 100 80 6.0 0 10 5.0 15 20 VEB, EMITTER BASE VOLTAGE (V) VCB, COLLECTOR BASE VOLTAGE (V) Figure 7. Input Capacitance Figure 8. Output Capacitance 10 1 1.0 mS IC (A) Cibo, INPUT CAPACITANCE (pF) 550 1.0 S Thermal Limit 0.1 0.01 0.01 10 mS 100 mS 0.1 1 10 VCE (Vdc) Figure 9. PNP Safe Operating Area http://onsemi.com 4 100 25 NSS20500UW3 PACKAGE DIMENSIONS WDFN3 CASE 506AU ISSUE O D NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994 . 2. CONTROLLING DIMENSION: MILLIMETERS. 3. DIMENSION b APPLIES TO PLATED TERMINAL AND IS MEASURED BETWEEN 0.25 AND 0.30 MM FROM TERMINAL. 4. COPLANARITY APPLIES TO THE EXPOSED PAD AS WELL AS THE TERMINALS. A B PIN ONE REFERENCE 2X 0.10 C 2X ÇÇÇÇ ÇÇÇÇ ÇÇÇÇ ÇÇÇÇ DIM A A1 A3 b D D2 E E2 e K L E MIN 0.70 0.00 0.25 1.40 0.90 0.35 MILLIMETERS NOM MAX 0.75 0.80 0.05 0.20 REF 0.30 0.35 2.00 BSC 1.50 1.60 2.00 BSC 1.00 1.10 1.30 BSC 0.35 REF 0.40 0.45 MIN 0.028 0.000 INCHES NOM 0.030 0.008 REF 0.012 0.079 BSC 0.059 0.055 0.079 BSC 0.039 0.035 0.051 BSC 0.014 REF 0.014 0.016 0.010 MAX 0.031 0.002 0.014 0.063 0.043 0.018 TOP VIEW 0.10 C SOLDERING FOOTPRINT* 1.300 A 0.10 C 2X 8X 0.08 C SEATING PLANE 0.600 (A3) SIDE VIEW A1 0.250 C D2 1.100 e 2 1 2X 0.400 L 0.400 K 3X b 0.275 1.600 *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. E2 3 0.300 e/2 0.10 C A B 0.05 C NOTE 3 BOTTOM VIEW ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 http://onsemi.com 5 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NSS20500UW3/D