bropamps0310

New micropower op-amps
Zero trade-offs
TSV6x family delivers the best power-to-speed ratio
March 2010
www.st.com/stdlinear
Enlarged TSV6x family for extended battery life and high accuracy at low
voltage
STMicroelectronics has recently introduced three new micropower op-amp families for power saving in
low-voltage applications. The TSV619x, TSV629x and TSV639x, based on previous TSV6x families, further reduce
power consumption for handheld, battery-supplied applications.
They offer an outstanding merit factor. For the same consumption as the TSV6x, they offer a gain-bandwidth product
increased by a factor of 3 and have twice the slew rate value. They are intended for non-inverting (G ≥ +4)
or inverting (G ≤ -3) gain configurations for stability reasons.
They keep the same advantages as the TSV6x families: precision, low supply voltage, low input currents, as well as tiny
packages.
Key features and benefits
Features
Benefits
Ultra low supply voltage: 5.5 V down to 1.5 V
Ideal for battery-powered devices, extends battery life
Large offer - 6 ranges of power/speed:
From 10 µA/450 kHz up to 60 µA/2.4 MHz
High merit factor extends battery-life
Standby current: 5 nA typ
Significantly reduces consumption when not in use, thus extends
battery life
Very low input offset voltage:
Down to 500 µV max
Good precision for small signal conditioning
Low input bias current: 1 pA typ
Ideal for high impedance sensors
Tiny packages:
SC70-5/6, SOT23-5/6/8, MSO8/10
Board space saving
High ESD tolerance (≥4 kV HBM)
High EMI rejection ratio
Design robustness, high reliability
TSV6xx and TSV6x9x: two complementary families to
better fit application needs
33
27
-100
0
-140
TSV63x
-180
Vcc = 5 V, Vicm = 2.5 V
Vload = 2.5 V,
RL = 10 kΩ, CL = 100 pF
-20
10 4
10 5
gain
phase
Supply current (µA)
20
23
Phase (°)
Gain (dB)
TSV639x
T = 25 °C
T = 125 °C
20
T = -40 °C
17
13
10
7
10 6
Frequency (Hz)
3
-220
0
0
10 7
Vicm = Vcc/2
1
2
3
Supply voltage (V)
Typical applications
QQ
QQ
QQ
2
Battery-powered devices
Signal conditioning, filtering
Medical handheld devices
QQ
QQ
QQ
Smoke detectors
Low-side current sensing
Photodiode pre-amplification
Number of
operators
Input
offset
voltage
Input
bias
current
Supply
current per
operator
GBP
typ. (V/µs)
min.
(V)
max.
(V)
max.
(mV)
max.
(nA)
max. (µA)
typ.
(MHz)
Slew rate
Stability
gain
Equivalent
input noise
voltage
typ. 1 kHz
(nV/√Hz)
Rail-rail
I/O
Standby
TSV611/2
1,2
1.5
5.5
4/0.8
0.01
15
0.12
0.034
≥1
156
Y/Y
No
TSV620/3/5
1,2,4
1.5
5.5
4/0.8
0.01
36
0.42
0.14
≥1
70
Y/Y
Yes
TSV621/2/4
1,2,4
1.5
5.5
4/0.8
0.01
36
0.42
0.14
≥1
70
Y/Y
No
TSV6191/2
1,2
1.5
5.5
4/0.8
0.01
15
0.45
0.07
≥10
156
Y/Y
No
TSV630/3/5
1,2,4
1.5
5.5
3/0.5/0.8
0.01
69
0.88
0.34
≥1
65
Y/Y
Yes
TSV631/2/4
1,2,4
1.5
5.5
3/0.5/0.8
0.01
69
0.88
0.34
≥1
65
Y/Y
No
TSV6290/3/5
1,2,4
1.5
5.5
4/0.8
0.01
36
1.3
0.35
≥4
70
Y/Y
Yes
TSV6291/2/4
1,2,4
1.5
5.5
4/0.8
0.01
36
1.3
0.35
≥4
70
Y/Y
No
TSV6390/3/5
1,2,4
1.5
5.5
3/0.5/0.8
0.01
69
2.5
0.7
≥4
65
Y/Y
Yes
TSV6391/2/4
1,2,4
1.5
5.5
3/0.5/0.8
0.01
69
2.5
0.7
≥4
65
Y/Y
No
Part number
30
40
Part number
Supply voltage
Other rail-to-rail products
TSV62x: very stable supply current versus supply
voltage and temperature
-60
60
TSV6xx device summary
4
5
Number
of
operators
Supply
voltage
Input offset
voltage
Input bias
current
Supply
current per
operator
GBP
Slew rate
min.
(V)
max.
(V)
max. (mV)
max. (nA)
max. (µA)
typ. (MHz)
typ. (V/µs)
Stability
gain
Equivalent
input noise
voltage
typ. 1 kHz
(nV/√Hz)
Rail-rail
I/O
TS941/2/4
1,2,4
2.5
10
10/5/2
0.15
1.85
0.01
0.0045
≥1
-
N/Y
TS931/2/4
1,2,4
2.7
10
10/5/2
0.15
33
0.1
0.05
≥1
76
N/Y
LMV321/358/324
1,2,4
2.7
6
3
50
200
1
0.35
≥1
40
Y/Y
TS912/4
2,4
2.7
16
10/5/2
0.15
350
1
0.8/0.6
≥1
30
Y/Y
TSV321/358/324
1,2,4
2.5
6
3/1
130
835
1.4
0.6
≥1
27
Y/Y
TS507
1
2.7
5.5
0.1
70
1150
1.9
0.6
≥1
12
Y/Y
TS982
2
2.5
5.5
5
500
7200
2.2
0.7
≥1
17
Y/Y
TS9511
1
2.7
12
0.8
70
1000
3
1
≥1
25
Y/Y
TS951/2/4
1,2,4
2.7
12
6
100
1300
3
1
≥1
25
Y/Y
TS9222/4
2,4
2.7
12
0.5
55
1200
4
1.3
≥1
9
Y/Y
TS921/2/4
1,2,4
2.7
12
3/0.9
100
1500
4
1.3
≥1
9
Y/Y
TSV911/2/4
1,2,4
2.5
5.5
4.5/1.5
0.01
1100
8
4.5
≥1
27
Y/Y
TS461/2/4
1,2,4
2.7
10
5
750
2800
12
4
≥1
4
N/Y
TS971/2/4
1,2,4
2.7
10
5
750
2800
12
4
≥1
4
N/Y
TSV991/2/4
1
2.5
5.5
4.5/1.5
0.01
1100
20
10
≥3
27
Y/Y
3
Evaluation board for single op-amp
QQ
QQ
Designed for multiple configurations
SOT23-5/6 and SC70-5/6 compatible
order code: STEVAL-CCA022V1
Typical application diagrams
Low side current sensing
Photodiode amplification
I
TSV6x
RS
TSV6x
© STMicroelectronics - March 2010 - Printed in Italy - All rights reserved
The STMicroelectronics corporate logo is a registered trademark of the STMicroelectronics group of companies.
All other names are the property of their respective owners.
For more information on ST products and solutions,
visit www.st.com
Order code: BROPAMPS0310