Datasheet QUICKbloc 16 Channel Universal I/O Module The 16 channel Universal I/O module is designed for all common digital and analog I/O applications. The module provides power and signal distribution and a high density connection for the cable to the PLC I/O card. NEW The module is configurable for either 8 dual ended channels or 16 single ended channels. These can be digital signals up to 125V or analog signals. Fused power is provided at each channel (or pair of channels in single ended applications). The cable connection uses Weidmuller’s innovative B2L/S2L connectors - high density but easy to configure, terminated without any special tools and suitable for large gauge wires. Weidmuller also offers cables in various lengths. Fuses include status LEDs and there are test points on each signal line to make measurements or the use of Hart protocol calibrators easy. Features: • provides power and signal distribution eliminating considerable installation and wiring time • suitable for digital inputs and outputs up to 125V, 1A per channel (5A total) • mounts on both 32mm and 35mm DIN rails • CSA approved Canada Mexico United States Weidmuller Ltd. Weidmuller, S.A. de C.V. Weidmuller Inc. 10 Spy Court Ave. Ingenieros Civiles #204 821 Southlake Blvd. Markham, Ontario L3R 5H6 Conjunto Industrial Chachapa Richmond, Virginia 23236 Telephone: (800) 268-4080 72990 Puebla, Pue. Mexico Telephone: (800) 849-9343 Facsimile: (905) 475-2798 Telephone: (222) 286 62 47 Facsimile: (804) 379-2593 Email: [email protected] Facsimile: (222) 286 62 42 Email: [email protected] Website: www.weidmuller.ca Website: www.weidmuller.com Universal I/O Module QUICKbloc Specifications Supply (“L/+” and “N/-”): 125V max., 5A max. Power per channel (1-8”+”, 1-8”-”) 125V max., 1A max. Fuse per channel: 5x20mm, 1A max. (not supplied) green LED status indication (fuse healthy) Wire size - all screw terminals: 26-12 AWG (0.5 - 4mm2) Cable connector: 18 pole (power plus 16 signal lines) male S2L with locking screws. Mates with Weidmuller 18 pole B2L tension clamp connector (cat.#1748070000) accepting 28-18AWG (0.08-1.0mm2) wires Test points: tin plated phosphor bronze, compatible with alligator clips and J-hook test leads Approvals: CSA Catalog number: 7940000602 2 Universal I/O Module QUICKbloc Digital Inputs - Single Ended, Sinking Field Device Digital Inputs - Single Ended, Sourcing Field Device Digital Input - Dual Ended, Common on Interface Module Digital Input - Dual Ended Digital Outputs - Single Ended, Sourcing Digital Outputs - Single Ended, Sinking 3 Universal I/O Module QUICKbloc Digital Outputs - Dual Ended, Common N/- on Interface Module Analog Input - Dual Ended, Common on Interface Module Digital Outputs - Dual Ended, Common L/+ on Interface Module Analog Inputs - Single Ended Analog Input - Dual Ended (Isolated) 4 Universal I/O Module QUICKbloc 5 Universal I/O Module QUICKbloc Cables: Conductors: 18 (2 power plus 16 signals) conductor 18AWG, CSA rated for 300V Power conductors: 5A max. Signal conductors: 1A max. recommended Module end: Weidmuller B2L connector (cat #1748070000) PLC end: Individual wires, with ferrules and wire markers; +, -, 1A, 1B, 2A, 2B........ Signal wires labelled as per the field wiring terminals on the module Length (m) Catalog Number 2.0 7940000628 2.5 7940001719 5.0 7940000629 Consult Weidmuller for other cable lengths. 6 Subject to technical changes · Printed in Canada · 99990293 · 11/2002