MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS DFN8 5x6, 1.27P PowerPhase FET CASE 506CR ISSUE C DATE 07 JUL 2015 1 2X SCALE 2:1 NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. DIMENSIONS b AND b1 APPLY TO PLATED TERMINAL AND ARE MEASURED BETWEEN 0.15 AND 0.25 MM FROM THE TIPS. 4. COPLANARITY APPLIES TO THE EXPOSED PADS AS WELL AS THE TERMINALS. 5. DIMENSIONS D1 AND E1 DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. 6. SEATING PLANE IS DEFINED BY THE TERMINALS. A1 IS DEFINED AS THE DISTANCE FROM THE SEATING PLANE TO THE LOWEST POINT ON THE PACKAGE BODY. 0.20 C D A B D1 8 7 ÏÏ ÏÏ PIN ONE IDENTIFIER 1 2 6 2X 0.20 C 5 E1 E 4X h 3 c 4 A1 TOP VIEW A 0.10 C DETAIL A 0.10 C C NOTE 4 SIDE VIEW 8X b 0.10 M 0.05 M 1 5X DETAIL A L 6X SEATING PLANE NOTE 6 0.10 C A B C M C A B DIM A A1 b b2 c D D1 D2 D3 E E1 E2 E3 E4 e G G1 h L L2 MILLIMETERS MIN MAX 0.90 1.10 0.00 0.05 0.40 0.60 0.40 0.60 0.20 0.30 5.15 BSC 4.90 5.10 3.70 3.90 2.96 3.16 6.15 BSC 5.80 6.00 2.37 2.57 1.05 1.25 1.36 1.56 1.27 BSC 0.625 BSC 1.615 BSC −−− 12 _ 0.34 0.59 1.68 1.93 D2 NOTE 3 1 E3 b2 0.10 G1 E4 M C A B E2 G RECOMMENDED SOLDERING FOOTPRINT* L2 D3 e/2 e BOTTOM VIEW 5.50 4.05 SUPPLEMENTAL BOTTOM VIEW 1.27 PITCH 0.62 GENERIC MARKING DIAGRAM* 2.07 1 5X 0.75 0.54 1.22 2.67 XXXXXX AYWZZ 1.66 XXXXXX= Specific Device Code A = Assembly Location Y = Year W = Work Week ZZ = Lot Traceability *This information is generic. Please refer to device data sheet for actual part marking. DOCUMENT NUMBER: 98AON78387F 5X 0.71 2.31 0.76 0.23 0.98 6.50 6X 0.65 4.10 DIMENSION: MILLIMETERS *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed STATUS: ON SEMICONDUCTOR STANDARD versions are uncontrolled except when stamped “CONTROLLED COPY” in red. NEW STANDARD: © Semiconductor Components Industries, LLC, 2002 Case Outline Number: http://onsemi.com DFN8 5X6, 1.27P POWERPHASE DESCRIPTION: October, 2002 − Rev. 0 PAGE 1 OFXXX 2 1 FET DOCUMENT NUMBER: 98AON78387F PAGE 2 OF 2 ISSUE REVISION DATE O RELEASED FOR PRODUCTION. REQ. BY I. MARIANO. 18 SEP 2013 A MODIFIED RECOMMENDED MOUNTING FOOTPRINT. REQ. J. O’NEIL. 04 FEB 2014 B CHANGED DIMENSION A FROM 1.35MIN, 1.55MAX TO 0.90MIN, 1.10MAX. REQ. BY J. O’NEIL. 06 NOV 2014 C CORRECTED NUMBER OF SIDE LEADS ON TOP VIEW, ISO IMAGE AND MARKING DIAGRAM FROM TWO TO THREE. REQ. BY P. CELAYA. 07 JUL 2015 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. © Semiconductor Components Industries, LLC, 2015 July, 2015 − Rev. C Case Outline Number: 506CR