FF-1503-18

FF-1503-18
This filter is designed to operate with forced air cooling
for systems that are required to meet Mil-Std-461F. A
circuit modification would be required if operation to
Mil-Std-461C is required.
BRN
With a 26 cfm fan supplying cooling the operating
temperature is 85oC.
With a 34 cfm fan supplying cooling the operating
temperature is90oC.
BRN
LOAD
LINE
BLU
BLU
GRN/YEL
Weight:
1300 gr / 2.9 lb.
Order P/N:
FF-1503-18
Operating Voltage = ______________________125 Vac
Operating Current (Max) = _____________ 18 AMP A/C
Operating Frequency = _____________________ 60 HZ
Temp Range (Storage) = ______________ -40 to 125oC
Temp Range (Oper.) @ 18.0 AMP = _______-40 to 85oC
Note: (cooling air may be required)
Diel. Withstand Volt (Ph—Case) = __________1500 Vac
Diel. Withstand Volt (Ph—Ph) = ___________ 1500 Vdc
Leakage Current @ 125 V, 60 HZ = ______ 0.3 mA Max
Discharge Voltage after 1.0 sec = __________ 43 V Max
Varistor Voltage = ___________________ (212—243) V
Initial Trans. Energy Dissipation = ______ 80 Joules Min
Max Current Surge (8/20us) = _____________ 10K Amp
Calculated MTBF = _________ 714,748 Hrs @ 30°C GB
INSERTION LOSS vs. FREQUENCY
OPERATING CURRENT
vs.
AMBIENT TEMPERATURE
OPERATING TEMP (DEG C)
90
80
70
60
50
40
12.0
13.0
14.0
15.0
16.0
CURRENT (AMPS)
USA
JMK Inc 15 Caldwell Dr. Amherst, NH 03031
PH: 603 886-4100
FX: 603 886-4115
email: [email protected]
PH: 44-(0) 7785310729 Fax: 44-(0) 141 589 1884
EUR
JMK Inc Glasgow G13 1DN Scotland UK
17.0
18.0