pdf

OPTOTRONIC® LED Power Supply
Product Data Sheet
OT CABLE CLAMP F-STYLE
®
OPTOTRONIC OT CABLE CLAMP F-STYLE
(strain relief) can be snapped onto the compact
ECG and thus converts it into an ECG suitable
for independent installation.
Benefits
- Comfort space for wire assembling
- Two cable clamp flaps for separate access to
primary and secondary side
- Only one screw per flap for easy and fast
fixation of the cables
- Suitable for different cable types
Cable Clamp F-style
dimension
L
39,2mm
B
53mm
H
30 mm
d
Φ 4,2
Applications
Independent applications
ECG with Cable Clamp F-style dimension
L
95mm
L2
119mm
B
53mm
H
30mm
H2
29 mm
Installation Method
1. Match cable clamp with
corresponding ECG (refer to table
“Matching ECG” for details).
2. Snap cable clamp into ECG
as shown.
3. Unscrew cover for wire
installation. Tighten screw
after wire installation
1
Edition: 08 July 2015
Ver.:0.1
Status: Preliminary
Misprints and technical changes excepted
Basic
Data
OPTOTRONIC® LED Power Supply
OT CABLE CLAMP F-STYLE
Item
Cable Jacket Diameter
Value
7-11
Unit
mm
Remarks
Dismantling of the cable
35
mm
Max.
Weight
26
g
Product Data Sheet
Tested cable types
(acc. EN60598-1):
Under preparation
NYM-J 5x1,5
NYM-J 4x1,5
NYM-J 3x1,5
H05 VV-F 3x1,5
H05 VV-F 3x1
H05 VV-F 2x1
H05 VV-F 3x0,75
H03 VV-F 3x0,75
Output side only
Output side only
Output side only
Output side only
Output side only
Output side only
Output side only
Type
EAN 10
4052899324879
EAN 40
4052899324886
Pieces / box
20
Matching ECG
Product name
OTi DALI 15/220-240/1A0 LT2
Ordering information
Product name
Type
EAN10
EAN40
OT Cable Clamp F-style
AB36801
4052899325555
4052899325562
Pieces / box
20
Disclaimer (Engineering Samples: B-Samples and C-Samples)
This product is a demonstration model from our development laboratories made available for your information only.
The model is not binding in respect to its fitness for use, i.e. service life, luminous flux, color temperature and performance.
Prior to production the design, including dimensions, is subject to modification.
You will, therefore, appreciate that at this stage of development we are unable to assume any liability also for damages which may be caused by this product.
Should you urgently require binding information for the preparation of construction data for your applications, please contact our marketing department.
Manufacturer’s address:
Technical support:
OSRAM GmbH
Kunden Service Center Germany
+49 (0)89-6213-60 00
Steinerne Furt 62 D-86167 Augsburg
Germany
www.osram.com
2
Edition: 08 July 2015
Ver.:0.1
Status: Preliminary
Misprints and technical changes excepted