ES07B, ES07D www.vishay.com Vishay Semiconductors Ultrafast Rectifier Surface Mount FEATURES • For surface mounted applications • Low profile package • Ideal for automated placement • Glass passivated pallet chip junction • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C • Meets JESD 201 class 2 whisker test • Wave and reflow solderable 17249 • AEC-Q101 qualified • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 MECHANICAL DATA Case: DO-219AB (SMF) Polarity: band denotes cathode end Weight: approx. 15 mg Packaging codes / options: GS18/10K per 13" reel (8 mm tape) GS08/3K per 7" reel (8 mm tape) Int. construction: single PARTS TABLE PART ORDERING CODE MARKING REMARKS ES07B ES07B-GS18 or ES07B-GS08 EB Tape and reel ES07D ES07D-GS18 or ES07D-GS08 ED Tape and reel ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION VALUE UNIT V ES07B VRRM 100 VRRM 200 V ES07B VRMS 70 V ES07D VRMS 140 V ES07B VDC 100 V ES07D VDC 200 V Ttp = 109 °C IF(AV) 1.2 A TA = 65 °C (1) IF(AV) 0.5 A TL = 25 °C IFSM 30 A Maximum RMS voltage Maximum DC blocking voltage Peak forward surge current 8.3 ms single half sine-wave SYMBOL ES07D Maximum repetitive peak reverse voltage Maximum average forward rectified current PART Note (1) Mounted on epoxy glass PCB with 3 mm x 3 mm Cu pads ( 40 μm thick) THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION Thermal resistance junction to ambient air (1) Operating junction and storage temperature range SYMBOL VALUE UNIT RthJA 180 K/W Tj, Tstg -55 to 150 °C Note (1) Mounted on epoxy glass PCB with 3 mm x 3 mm Cu pads ( 40 μm thick) Rev. 2.0, 19-Feb-15 Document Number: 85737 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ES07B, ES07D www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION IF = 1 A (1) Instaneous forward voltage TA = 25 °C Maximum DC reverse current at rated DC blocking voltage TA = 100 °C Reverse recovery time IF = 0.5 A, IR = 1 A, Irr = 0.25 A Typical capacitance 4 V, 1 MHz PART SYMBOL MIN. TYP. MAX. UNIT V ES07B VF 0.98 ES07D VF 0.98 V ES07B IR 10 μA ES07D IR 10 μA ES07B IR 50 μA ES07D IR 50 μA ES07B trr 25 ns ES07D trr 25 ES07B Cj 4 pF ES07D Cj 4 pF ns Note (1) Pulse test: 300 μs pulse width, 1 % duty cycle TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 7 10 f = 1 MHz 6 5 CD (pF) IF (A) 1 0.1 Typical at 150 °C 0.01 4 3 2 Typical at 100 °C 1 Typical at 25 °C 0.001 0 0.2 0.4 18242 0.6 0.8 1.0 1.2 0 0.1 1.4 1 18244 VF (V) Fig. 1 - Typical Forward Characteristics 10 100 VR (V) Fig. 3 - Typical Diode Capacitance vs. Reverse Voltage 1000 1.4 1.2 Tj = 150 °C 100 Tj = 125 °C 1.0 IR (µA) Average Forward Current (A) Tie point temperature 0.8 0.6 Tj = 100 °C 10 Tj = 75 °C 1 Tj = 50 °C 0.4 Tj = 25 °C 0.1 Ambient temperature 0.2 0 18243 Tj = 0 °C Tj = - 50 °C 0.01 0 25 50 75 100 125 0 150 Temperature (Ambient or Tie) (°C) Fig. 2 - Forward Current Derating Curve 18245 40 80 120 160 200 VR (V) Fig. 4 - Typical Reverse Characteristics Rev. 2.0, 19-Feb-15 Document Number: 85737 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ES07B, ES07D www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters (inches): DO-219AB (SMF) 0.85 (0.033) 0 (0.000) 0.1 (0.004) 5 5 0.1(0.003) 1.7 (0.067) Detail Z enlarged 1.2 (0.047) 0.8 (0.031) 0.25 (0.010) 1.9 (0.075) 0.35 (0.014) 1.08 (0.043) 2.9 (0.114) 0.88 (0.035) 2.7 (0.106) 3.9 (0.154) 3.5 (0.138) Foot print recommendation: Created - Date: 15. February 2005 Rev. 3 - Date: 13. March 2007 Document no.:S8-V-3915.01-001 (4) 1.3 (0.051) 1.4 (0.055) 1.3 (0.051) 2.9 (0.114) 17247 Rev. 2.0, 19-Feb-15 Document Number: 85737 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ES07B, ES07D www.vishay.com Vishay Semiconductors BLISTERTAPE DIMENSIONS in millimeters: DO-219 AB (SMF) PS Document-No.: S8-V-3717.02-001 (3) 18513 Rev. 2.0, 19-Feb-15 Document Number: 85737 4 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000