PANASONIC EXC

Issue No.
:
151XC14C08005
Date of Issue : October 27.2008
Classification : „ New
DIGI-KEY CORPORATION
† Changed
PRODUCT SPECIFICATION FOR APPROVAL
Product Description
Product Part Number
Common Mode Noise Filter (RoHS)
: EXC14CE900U
Country of Origin
:
JAPAN
Applications
:
Standard electronic equipment
:
*If you approve this specification, please fill in and sign the below and return 1 copy to us.
Approval No
:
Approval Date
:
Executed by
:
(signature)
Title
:
Dept.
:
Circuit Components Business Unit
Prepared by
:
Panasonic Electronic Devices Co., Ltd.
Contact Person
:
Signature
401 Sadamasa-cho,
Fukui City 910-8502 Japan
Phone : +81-776-56-8034
Fax : +81-776-56-3114
Engineering Section
M.Takeda
Name(Print)
Title
:
Authorized by
:
Signature
Y.Morimoto
Name(Print)
Title :
Manager of Engineering
Classification
No.
Specification
151-EXC-14CE202S
Product Name
Page
1 of 11
Common Mode Noise Filter (Type EXC14CE)
1. Scope
This specification is applicable to Common Mode Noise Filter, used for general electronic
equipment.
2. Dimensions in mm (not to scale)
D
A
B
F
C
E
A
B
C
D
E
Unit: mm (inch)
F
0.65±0.05
(.026±.002)
0.85±0.05
(.033±.002)
0.45±0.05
(.018±.002)
0.10 min.
(.004 min,)
0.50±0.1
(.020±.004)
0.27±0.1
(.011±.004)
3. Structure
1
5
3
2
1
Ni-Zn Ferrite
2
Outer Termination(Ag)
3
Ni Plate
4
Sn Plate
5
Inner Conductor(Ag)
4
4. Schematic
Constitution
July. 28, 2008
Circuit Components Business Unit
Panasonic Electronic Devices Co., Ltd.
Classification
No.
Specification
151-EXC-14CE202S
Product Name
Page
2 of 11
Common Mode Noise Filter (Type EXC14CE)
5. Part Number
EXC
1
4
C
E
900
U
1)
2)
3)
4)
5)
6)
7)
1) Product Code ---------------------- EXC: Noise Suppression Filter
2) External Dimensions ------------- 1: (L) 0.8 mm
3) Number of Terminations -------- 4: 4 pins
4) Type ---------------------------------- C: Coupled Type
5) Characteristics -------------------- E: For High Speed Differential Transmission
(High Coupled Type)
6) Nominal Impedance Value ----- ex) 900: 90 × 100 (Ω)
7) Packaging -------------------------- U: Embossed Tape
6. Rating
Part No.
EXC14CE900U
Common Mode
Impedance*1
at 100MHz
90(Ω)±20(%)
Differential Mode
Impedance*2
at 100MHz
20(Ω) max.
Rated
Voltage
(V DC)
5
Rated
Current
(mA DC)
130
Impedance measurement equipment: HP4291A or Corresponding equipment
Impedance measurement circuit:
*1
*2
Z
Common Mode
Z
Differential Mode
7. Category Temperature Range
-40 to +85 °C
Constitution
July. 28, 2008
Circuit Components Business Unit
Panasonic Electronic Devices Co., Ltd.
DC
Resistance
(Ω.)
2.5(Ω) max.
Classification
No.
Specification
151-EXC-14CE202S
Product Name
Page
Common Mode Noise Filter (Type EXC14CE)
3 of 11
8. Performance Characteristics
Standard test condition
Temperature: 15 to 35 °C
Relative humidity: 25 to 85 %
Atmospheric pressure: 86 to 106 kPa
When there are questions concerning measurement result
Temperature: 20±2 °C
Relative humidity: 60 to 70 %
Atmospheric pressure: 86 to 106 kPa
8-1. Mechanical Characteristics
Item
Test Method
Specification
Solderability
Preheating temperature: 150 °C
Preheating time: 1 min
Solder temperature: 230±5 °C
Duration: 3±0.5 s
Immersion speed: 25 mm/s
At least 90 % of each termination is
covered with the new solder.
Resistance to
Soldering Heat
Preheating temperature: 150 °C
Preheating time: 1 min
Solder temperature: 260±5 °C
Duration: 10±0.5 s
Immersion speed: 25 mm/s
Recovery:
48±4 hours of recovery under the
standard condition after the test.
Impedance variation: within ±30 %
Remaining terminal: 70 % min.
Bending Strength
Warp: 2 mm
Testing board: Glass-epoxy
Thickness: 1.0 mm
No abnormality of appearance
Impedance variation: within ±30 %
20
R230
t=1
F
45
Vibration
Constitution
July. 28, 2008
45
2
Directions: 2 h each in X, Y, and Z
directions (Total: 6 h)
Frequency range: 10 to 55 to 10 Hz
(Sweep rate: 1 min)
Amplitude: 1.5 mm
No abnormality of appearance
Impedance variation: within ±30 %
Circuit Components Business Unit
Panasonic Electronic Devices Co., Ltd.
Classification
No.
Specification
151-EXC-14CE202S
Product Name
Page
Common Mode Noise Filter (Type EXC14CE)
4 of 11
8-2. Environmental Characteristics
Item
Heat Cycle
Test Method
Conditions for 1 cycle
Step 1: -40±3 °C, 30±3 min
Step 2: +25±2 °C, 0 to 5 min
Step 3: +85±3 °C, 30±3 min
Step 4: +25±2 °C, 0 to 5 min
Number of cycle: 5 cycle
1 to 2 hours of recovery under the
standard condition after the test
Load Life
No abnormality of appearance
Temperature: 85±2 °C
Impedance variation: within ±30 %
Applied current: Rated current
Duration: 500 h
1 to 2 hours of recovery under the
standard condition after the test
Humidity
No abnormality of appearance
Temperature: 40±2 °C
Impedance variation: within ±30 %
Humidity: 90 to 95 %RH
Duration: 500 h
1 to 2 hours of recovery under the
standard condition after the test
Humidity
Load Life
No abnormality of appearance
Temperature: 40±2 °C
Humidity: 90 to 95 %RH
Impedance variation: within ±30 %
Applied current: Rated current
Duration: 500 h
1 to 2 hours of recovery under the
standard condition after the test
Constitution
July. 28, 2008
Specification
No abnormality of appearance
Impedance variation: within ±30 %
Circuit Components Business Unit
Panasonic Electronic Devices Co., Ltd.
Classification
No.
Specification
151-EXC-14CE202S
Product Name
Page
5 of 11
Common Mode Noise Filter (Type EXC14CE)
9. Packaging Method
9-1. Embossed Carrier Tape
Tape running direction
P0
C
Feeding hole
C-C’
P2
t1
E
D0
F
W
B
A
Chip pocket
C’
t2
P1
A
0.75±0.1
(.03±.004)
B
0.95±0.1
(.04±.004)
W
8.0±0.2
(.32±.008)
F
3.5±0.05
(.14±.002)
E
1.75±0.1
(.07±.004)
P2
2.0±0.1
(.08±.004)
P0
4.0±0.1
(.16±.004)
D0
1.5+0.1,-0
(.06+.004,-0)
t1
0.25±0.05
(.01±.002)
t2
0.85±0.15
(.033±.006)
Unit: mm (inch)
P1
2.0±0.1
(.08±.004)
9-2. Reel
T
W
E
B
C
D
t
A
A
180.0+0/-3
(7.1+0/-.12)
B
C
60.0+1/-0
13.0±0.2
(2.4+.04/-0) (.51±.008)
Constitution
July. 28, 2008
D
21.0±0.8
(.83±.03)
E
2.0±0.5
(.08±.02)
W
9.0±0.3
(.35±.01)
Circuit Components Business Unit
Panasonic Electronic Devices Co., Ltd.
Unit: mm (inch)
T
t
11.4±1.0
1.2±0.1
(.45±.04) (.04±.004)
Classification
No.
Specification
151-EXC-14CE202S
Product Name
Page
6 of 11
Common Mode Noise Filter (Type EXC14CE)
9-3. Taping Method
The first end (leader part) and the last end (trailer part ) of each tape shall be left empty
without loading the product, with the top of the leader part comprising only cover tape. (See
the figure below.) The cover tape may not be sealed in the leader part and the trailer part.
Leader part
Trailer part
160 mm or more
330±10 mm
Blank portions
Chip cavity
250±10 mm
Cover tape
Tape running direction
Reel
9-4. Peeling Strength of Cover Tape
0.1 to 1.3 N
Top Cover tape
165 to 180 °
Peeling direction
Embossed carrier tape
Tape running direction
9-5. Label Indication
A label indicating the following in English shall be put on each reel and box.
1) Part Name
2) Part No.
3) Quantity
4) Lot No.
Label
Reel
9-6. Package Quantity
Quantity per reel: 10,000 pcs.
Constitution
July. 28, 2008
Circuit Components Business Unit
Panasonic Electronic Devices Co., Ltd.
Classification
No.
Specification
151-EXC-14CE202S
Product Name
Page
Common Mode Noise Filter (Type EXC14CE)
7 of 11
10. Chip-mounting Considerations
10-1. Recommended Land Pattern (Only for Reflow Soldering)
B
E
D
A
C
D
F E
A
0.80 to 1.00 (0.031 to 0.039)
B
0.80 (0.031)
C
0.30 (0.012)
D
0.25 to 0.35 (0.010 to 0.014)
E
0.30 (0.012)
F
0.20 (0.008)
Unit: mm (inch)
1) When this products are mounted on a PCB, the amount of solder used (size of fillet) can
directly affect this product performance.
2) The amount of solder applied can affect the ability of products to withstand mechanical
stresses which may lead to breaking or cracking.
Therefore, when designing land-patterns it is necessary to consider the appropriate size
and configuration of the solder pads which in turn determines the amount of solder
necessary to form the fillets.
10-2. Pattern Configurations
1) After this products have been mounted on the PC boards, products can be subjected to
mechanical stresses in subsequent manufacturing processes. For this reason, planning
pattern configurations and the position of SMD inductors should be carefully performed to
minimize stress.
2) Board separation should not be done manually, but by using the appropriate devices.
10-3. Considerations for Automatic Chip-Mounting
Excessive impact load should not be imposed on the inductors when mounting onto the PC
boards.
Constitution
July. 28, 2008
Circuit Components Business Unit
Panasonic Electronic Devices Co., Ltd.
Classification
No.
Specification
151-EXC-14CE202S
Product Name
Page
8 of 11
Common Mode Noise Filter (Type EXC14CE)
9. Reflow Soldering
< Recommended Temperature Profile in Reflow Soldering >
The limit of resistance to reflow
soldering heat (above 200 °C)
260
Rising
temp. 1
Preheating
Gradual
cooling
Rising Main heating
temp. 2
Temperature (°C)
Temperature of termination
270
250
240
230
220
210
200
0
10
20
Time
Solder
SnPb eutectic
(Sn-37Pb)
SnAgCu lead-free
(Sn-3Ag-0.5Cu)
30
40
50
60
70
Time (s)
Rising temp. 1
Preheating
Rising temp. 2
Main heating
Gradual cooling
The normal to
Preheating temp.
140 to 160 °C
Preheating to 200 °C
235±10 °C
200 to 100 °C
30 to 60 s
60 to 120 s
20 to 40 s
Peak
1 to 4 °C/s
The normal to
Preheating temp.
150 to 170 °C
Preheating to 210 °C
250 +10
°C
-5
210 to 100 °C
30 to 60 s
60 to 120 s
20 to 40 s
Peak
1 to 4 °C/s
1) Reflow soldering shall be within twice.
2) Please inqire of us when you use the different conditions.
3) The temperature may be changed according to the size of the board and the mounting
density, etc. Please measure the temperature of termination in each type of the board
before actual use.
10. Repair with Hand Soldering
1) Allow enough preheating with a blast of hot air or similar method. Use a soldering iron
with the tip temperature 350 °C or less. Solder for 3 seconds or less for each termination.
2) Never touch this product with a tip of the solder iron.
Constitution
July. 28, 2008
Circuit Components Business Unit
Panasonic Electronic Devices Co., Ltd.
Classification
No.
Specification
Product Name
151-EXC-14CE202S
Page
Common Mode Noise Filter (Type EXC14CE)
9 of 11
11. Notice for use
1. This specification shows the quality and performance of a unit component.
sure to evaluate and verify the product mounting it in your product.
Before adoption, be
2. Precautions on the use of this products.
1) Do not apply current in excess of the rated value because this product may be high
temperature.
2) Always wear static control bands to protect against ESD.
3) Keep this products away from all magnets and magnetic object.
3. In traffic transportation equipment (trains, cars, traffic signal equipment, etc.), medical equipment,
aerospace equipment, electric heating appliances, combustion and gas equipment, disaster and
crime preventive equipment, etc. in cases where it is forecast that the failure of this product gives
serious damage to the human life and others, use fail-safe design and ensure safety by studying
the following items.
1) Ensure safety as the system by setting protective circuit and protective equipment.
2) Ensure safety as the system by setting such redundant circuit as do not cause danger by a
signal failure.
4. The products are intended for use in general standard applications for general electronic
equipment (AV products, household electric appliances, office equipment, information and
communication equipment, etc.); hence, they do not take the use under the following special
environments into consideration. Accordingly, the use in the following special environments,
and such environmental conditions may affect the performance of the products; prior to use,
verify the performance, reliability, etc. thoroughly.
1) Use in liquids such as water, oil, chemical, and organic solvent
2) Where the product is close to a heating component, and where an inflammable such as a
polyvinyl chloride wire is arranged close to the product.
3) Use in environment with large static electricity and strong electromagnetic waves
4) Where water or water-soluble detergent is used in cleaning free soldering or in flux cleaning
after soldering(Pay particular attention to soluble flux)
5) Storage in places outside the temperature range of -5 to 40 °C and humidity range of 40 to
60 %RH
6) Use or storage in places exposed to open-air, dusty atmosphere, and direct sunlight
7) Use or storage in places full of corrosive gases such as sea breeze, Cl2, H2S, NH3, SO2, and
Nox
8) Use or storage in such a place where the product is wetted due to dew condensation
9) Where the product is sealed or coated with resin, etc.
10) Storage over six months after our delivery (This item also applies to the case where the
storage method specified in item 5) to 8) has been followed.)
5. In case that there are any doubt about safety problems, please inform us early and be sure to
evaluate and verify the product mounting it in your product before adoption.
Constitution
July. 28, 2008
Circuit Components Business Unit
Panasonic Electronic Devices Co., Ltd.
Classification
No.
Specification
Product Name
151-EXC-14CE202S
Page
Common Mode Noise Filter (Type EXC14CE)
10 of 11
12. Regulation
1) This product has not been manufactured with any ozone depleting chemical controlled under the
Montreal Protocol .
2) All materials used in this product are existing chemical substances recognized under " laws on
examination of chemical substances and regulations of manufacturing and others."
3) All materials used in this products contain no brominated materials of PBB0s or PBBs as the
flame-retardant .
4) Please contact us to obtain a notice as to whether this product has passed inspection under
review criteria primarily based on Foreign Exchange and Foreign Trade Control law and
appended table in the Export Control law.
5)This product complies with the RoHS Directive (Restriction of the use of certain Hazardous
Substances in electrical and electronic equipment (DIRECTIVE 2002/95/EC)).
13. Production Site
Panasonic Electronic Devices Japan Co., Ltd. (Japan)
Constitution
July. 28, 2008
Circuit Components Business Unit
Panasonic Electronic Devices Co., Ltd.
Classification
No.
Specification
151-EXC-14CE202S
Product Name
Page
11 of 11
Common Mode Noise Filter (Type EXC14CE)
Impedance Characteristics
<Reference Data>
EXC14CE900
1000
Impedance (ohm)
Common Mode
100
10
Differential Mode
1
1
10
Common Mode
Z
Constitution
July. 28, 2008
100
Frequency (MHz)
1000
10000
Differential Mode
Z
Circuit Components Business Unit
Panasonic Electronic Devices Co., Ltd.