NTMFS5C404NLT Power MOSFET 40 V, 0.67 mW, 370 A, Single N−Channel Features • • • • • Small Footprint (5x6 mm) for Compact Design Low RDS(on) to Minimize Conduction Losses Low QG and Capacitance to Minimize Driver Losses NTMFS5C404NLTWF − Wettable Flank Option for Enhanced Optical Inspection These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant www.onsemi.com V(BR)DSS RDS(ON) MAX ID MAX 0.67 mW @ 10 V 40 V 370 A 1.0 mW @ 4.5 V MAXIMUM RATINGS (TJ = 25°C unless otherwise noted) Symbol Value Unit Drain−to−Source Voltage VDSS 40 V Gate−to−Source Voltage VGS ±20 V ID 370 A Parameter Continuous Drain Current RqJC (Notes 1, 3) TC = 25°C Power Dissipation RqJC (Note 1) Continuous Drain Current RqJA (Notes 1, 2, 3) Steady State TC = 100°C TC = 25°C TA = 25°C Power Dissipation RqJA (Notes 1 & 2) Steady State G (4) 260 PD TC = 100°C W 200 100 ID TA = 100°C A 52 3.9 IDM 900 A TJ, Tstg −55 to + 175 °C IS 191 A Single Pulse Drain−to−Source Avalanche Energy (IL(pk) = 38 A) EAS 907 mJ Lead Temperature for Soldering Purposes (1/8″ from case for 10 s) TL 260 °C Pulsed Drain Current TA = 100°C TA = 25°C, tp = 10 ms Operating Junction and Storage Temperature Source Current (Body Diode) N−CHANNEL MOSFET MARKING DIAGRAM W 1.9 D Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. THERMAL RESISTANCE MAXIMUM RATINGS Parameter S (1,2,3) 37 PD TA = 25°C D (5,6) Symbol Value Unit Junction−to−Case − Steady State RqJC 0.75 °C/W Junction−to−Ambient − Steady State (Note 2) RqJA 39 1 DFN5 (SO−8FL) CASE 488AA STYLE 1 S S S G D XXXXXX AYWZZ D D XXXXXX = 5C404L XXXXXX = (NTMFS5C404NLT) or XXXXXX = 404LWF XXXXXX = (NTMFS5C404NLTWF) A = Assembly Location Y = Year W = Work Week ZZ = Lot Traceability ORDERING INFORMATION See detailed ordering, marking and shipping information on page 5 of this data sheet. 1. The entire application environment impacts the thermal resistance values shown, they are not constants and are only valid for the particular conditions noted. 2. Surface−mounted on FR4 board using a 650 mm2, 2 oz. Cu pad. 3. Maximum current for pulses as long as 1 second is higher but is dependent on pulse duration and duty cycle. © Semiconductor Components Industries, LLC, 2016 May, 2016 − Rev. 2 1 Publication Order Number: NTMFS5C404NLT/D NTMFS5C404NLT ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise specified) Parameter Symbol Test Condition Min Drain−to−Source Breakdown Voltage V(BR)DSS VGS = 0 V, ID = 250 mA 40 Drain−to−Source Breakdown Voltage Temperature Coefficient V(BR)DSS/ TJ Typ Max Unit OFF CHARACTERISTICS Zero Gate Voltage Drain Current IDSS Gate−to−Source Leakage Current V 21.6 VGS = 0 V, VDS = 40 V mV/°C TJ = 25 °C 10 TJ = 125°C 250 IGSS VDS = 0 V, VGS = 20 V VGS(TH) VGS = VDS, ID = 250 mA 100 mA nA ON CHARACTERISTICS (Note 4) Gate Threshold Voltage Threshold Temperature Coefficient VGS(TH)/TJ Drain−to−Source On Resistance Forward Transconductance RDS(on) 1.2 2.0 −6.2 VGS = 10 V ID = 50 A 0.52 0.67 VGS = 4.5 V ID = 50 A 0.75 1.0 gFS VDS =15 V, ID = 50 A V mV/°C 270 mW S CHARGES, CAPACITANCES & GATE RESISTANCE Input Capacitance CISS Output Capacitance COSS Reverse Transfer Capacitance CRSS 12168 VGS = 0 V, f = 1 MHz, VDS = 25 V 4538 pF 79.8 Total Gate Charge QG(TOT) VGS = 4.5 V, VDS = 20 V; ID = 50 A 81 Total Gate Charge QG(TOT) VGS = 10 V, VDS = 20 V; ID = 50 A 181 Threshold Gate Charge QG(TH) Gate−to−Source Charge QGS 8.5 nC 27.8 VGS = 4.5 V, VDS = 20 V; ID = 50 A Gate−to−Drain Charge QGD Plateau Voltage VGP 23.8 2.7 td(ON) 24 V SWITCHING CHARACTERISTICS (Note 5) Turn−On Delay Time Rise Time Turn−Off Delay Time Fall Time tr td(OFF) VGS = 4.5 V, VDS = 20 V, ID = 50 A, RG = 1.0 W tf 135 ns 87 157 DRAIN−SOURCE DIODE CHARACTERISTICS Forward Diode Voltage Reverse Recovery Time Charge Time Discharge Time Reverse Recovery Charge VSD VGS = 0 V, IS = 50 A TJ = 25°C 0.7 TJ = 125°C 0.61 tRR ta tb 1.2 V 97.4 VGS = 0 V, dIS/dt = 100 A/ms, IS = 50 A QRR 46.5 ns 50.9 190 nC Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 4. Pulse Test: pulse width v 300 ms, duty cycle v 2%. 5. Switching characteristics are independent of operating junction temperatures. www.onsemi.com 2 NTMFS5C404NLT TYPICAL CHARACTERISTICS 800 10 V to 3.2 V 280 3.0 V 700 ID, DRAIN CURRENT (A) ID, DRAIN CURRENT (A) 240 200 160 2.8 V 120 80 500 400 300 100 0 0 0.5 1.0 2.0 1.5 2.5 TJ = 25°C 200 40 TJ = 125°C TJ = −55°C 0 3.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 VDS, DRAIN−TO−SOURCE VOLTAGE (V) VGS, GATE−TO−SOURCE VOLTAGE (V) Figure 1. On−Region Characteristics Figure 2. Transfer Characteristics 0.0015 0.0014 0.0013 TJ = 25°C ID = 50 A 0.0012 0.0011 0.0010 0.0009 0.0008 0.0007 0.0006 0.0005 0.0004 3 4 5 6 7 8 9 10 RDS(on), DRAIN−TO−SOURCE RESISTANCE (W) 0 RDS(on), DRAIN−TO−SOURCE RESISTANCE (W) 600 4.0 0.0010 VGS = 4.5 V 0.0008 0.0006 VGS = 10 V 0.0004 TJ = 25°C 0.0002 10 50 90 130 170 210 250 290 VGS, GATE VOLTAGE (V) ID, DRAIN CURRENT (A) Figure 3. On−Resistance vs. Gate−to−Source Voltage Figure 4. On−Resistance vs. Drain Current and Gate Voltage VGS = 10 V ID = 50 A 1.9 TJ = 150°C 100k IDSS, LEAKAGE (nA) RDS(on), NORMALIZED DRAIN−TO− SOURCE RESISTANCE (W) 1M 2.1 1.7 1.5 1.3 1.1 0.9 TJ = 125°C 10k TJ = 85°C 1k 100 0.7 0.5 −50 −25 10 0 25 50 75 100 125 150 175 5 10 15 20 25 30 35 TJ, JUNCTION TEMPERATURE (°C) VDS, DRAIN−TO−SOURCE VOLTAGE (V) Figure 5. On−Resistance Variation with Temperature Figure 6. Drain−to−Source Leakage Current vs. Voltage www.onsemi.com 3 40 NTMFS5C404NLT 10 CISS COSS VGS = 0 V TJ = 25°C f = 1 MHz CRSS 5 0 15 10 25 20 35 30 30 QT 25 8 20 6 15 4 QGD QGS 2 0 40 10 VDS = 20 V TJ = 25°C ID = 50 A 0 20 40 60 80 100 120 140 5 0 160 180 VDS, DRAIN−TO−SOURCE VOLTAGE (V) QG, TOTAL GATE CHARGE (nC) Figure 7. Capacitance Variation Figure 8. Gate−to−Source and Drain−to−Source Voltage vs. Total Charge VDS, DRAIN−TO−SOURCE VOLTAGE (V) 14k 13k 12k 11k 10k 9k 8k 7k 6k 5k 4k 3k 2k 1k 0 VGS, GATE−TO−SOURCE VOLTAGE (V) C, CAPACITANCE (pF) TYPICAL CHARACTERISTICS 10,000 46 IS, SOURCE CURRENT (A) t, TIME (ns) VGS = 4.5 V VDD = 20 V ID = 50 A td(off) 1000 tf tr td(on) 100 41 36 31 26 TJ = 125°C 21 16 11 TJ = 150°C TJ = 25°C 6 10 1 1000 TJ = −55°C 1 10 100 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 RG, GATE RESISTANCE (W) VSD, SOURCE−TO−DRAIN VOLTAGE (V) Figure 9. Resistive Switching Time Variation vs. Gate Resistance Figure 10. Diode Forward Voltage vs. Current 1000 TC = 25°C VGS ≤ 10 V 0.01 ms 0.1 ms 100 100 dc TJ(initial) = 25°C IPEAK (A) IDS (A) 1 ms 10 ms TJ(initial) = 100°C 10 10 RDS(on) Limit Thermal Limit Package Limit 1 1 0.1 1 10 1E−04 100 1E−03 VDS (V) TIME IN AVALANCHE (s) Figure 11. Safe Operating Area Figure 12. IPEAK vs. Time in Avalanche www.onsemi.com 4 1E−02 NTMFS5C404NLT 100 RqJA(t) (°C/W) 50% Duty Cycle 10 20% 10% 5% 1 2% 1% NTMFS5C404NLT 650 mm2, 2 oz., Cu Single Layer Pad 0.1 Single Pulse 0.01 0.000001 0.00001 0.0001 0.001 0.01 0.1 1 10 100 1000 PULSE TIME (sec) Figure 13. Thermal Characteristics DEVICE ORDERING INFORMATION Marking Package Shipping† NTMFS5C404NLTT1G 5C404L DFN5 (Pb−Free) 1500 / Tape & Reel NTMFS5C404NLTWFT1G 404LWF DFN5 (Pb−Free, Wettable Flanks) 1500 / Tape & Reel NTMFS5C404NLTT3G 5C404L DFN5 (Pb−Free) 5000 / Tape & Reel NTMFS5C404NLTWFT3G 404LWF DFN5 (Pb−Free, Wettable Flanks) 5000 / Tape & Reel Device †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. www.onsemi.com 5 NTMFS5C404NLT PACKAGE DIMENSIONS DFN5 5x6, 1.27P (SO−8FL) CASE 488AA ISSUE M 2X 0.20 C D A 2 B D1 NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSION D1 AND E1 DO NOT INCLUDE MOLD FLASH PROTRUSIONS OR GATE BURRS. 2X 0.20 C 4X E1 2 q E c 1 2 3 DIM A A1 b c D D1 D2 E E1 E2 e G K L L1 M q A1 4 TOP VIEW C SEATING PLANE DETAIL A 0.10 C A 0.10 C SIDE VIEW 0.10 8X b C A B 0.05 c DETAIL A RECOMMENDED SOLDERING FOOTPRINT* e/2 1 STYLE 1: PIN 1. SOURCE 2. SOURCE 3. SOURCE 4. GATE 5. DRAIN 2X 0.495 e L MILLIMETERS MIN NOM MAX 0.90 1.00 1.10 0.00 −−− 0.05 0.33 0.41 0.51 0.23 0.28 0.33 5.15 5.00 5.30 4.70 4.90 5.10 3.80 4.00 4.20 6.00 6.15 6.30 5.70 5.90 6.10 3.45 3.65 3.85 1.27 BSC 0.51 0.575 0.71 1.20 1.35 1.50 0.51 0.575 0.71 0.125 REF 3.00 3.40 3.80 0_ −−− 12 _ 4.560 2X 1.530 4 K 3.200 E2 PIN 5 (EXPOSED PAD) G L1 4.530 M D2 1.330 2X 0.905 1 BOTTOM VIEW 0.965 4X 1.000 4X 0.750 1.270 PITCH DIMENSIONS: MILLIMETERS *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and the are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 www.onsemi.com 6 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NTMFS5C404NLT/D