NTMFS5C404NL D

NTMFS5C404NL
Power MOSFET
40 V, 0.67 mW, 370 A, Single N−Channel
Features
•
•
•
•
Small Footprint (5x6 mm) for Compact Design
Low RDS(on) to Minimize Conduction Losses
Low QG and Capacitance to Minimize Driver Losses
These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
Parameter
Drain−to−Source Voltage
Gate−to−Source Voltage
Continuous Drain
Current RqJC
(Notes 1, 3)
TC = 25°C
Power Dissipation
RqJC (Note 1)
Continuous Drain
Current RqJA
(Notes 1, 2, 3)
Steady
State
TC = 25°C
Power Dissipation
RqJA (Notes 1 & 2)
Pulsed Drain Current
Value
Unit
VDSS
40
V
VGS
±20
V
ID
370
A
Steady
State
PD
ID
Operating Junction and Storage Temperature
Source Current (Body Diode)
W
167
0.67 mW @ 10 V
370 A
1.0 mW @ 4.5 V
D (5)
G (4)
A
52
PD
S (1,2,3)
N−CHANNEL MOSFET
37
TA = 100°C
TA = 25°C, tp = 10 ms
ID MAX
67
TA = 100°C
TA = 25°C
RDS(ON) MAX
260
TC = 100°C
TA = 25°C
V(BR)DSS
40 V
Symbol
TC = 100°C
www.onsemi.com
W
3.2
1.3
IDM
900
A
TJ, Tstg
−55 to
+ 175
°C
IS
184
A
Single Pulse Drain−to−Source Avalanche
Energy (IL(pk) = 38 A)
EAS
907
mJ
Lead Temperature for Soldering Purposes
(1/8″ from case for 10 s)
TL
260
°C
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
MARKING
DIAGRAM
D
1
DFN5
(SO−8FL)
CASE 488AA
STYLE 1
5C404L
A
Y
W
ZZ
S
S
S
G
D
5C404L
AYWZZ
D
D
= Specific Device Code
= Assembly Location
= Year
= Work Week
= Lot Traceability
THERMAL RESISTANCE MAXIMUM RATINGS
Symbol
Value
Unit
Junction−to−Case − Steady State
Parameter
RqJC
0.75
°C/W
Junction−to−Ambient − Steady State (Note 2)
RqJA
39
ORDERING INFORMATION
See detailed ordering, marking and shipping information in the
package dimensions section on page 5 of this data sheet.
1. The entire application environment impacts the thermal resistance values shown,
they are not constants and are only valid for the particular conditions noted.
2. Surface−mounted on FR4 board using a 650 mm2, 2 oz. Cu pad.
3. Maximum current for pulses as long as 1 second is higher but is dependent
on pulse duration and duty cycle.
© Semiconductor Components Industries, LLC, 2016
May, 2016 − Rev. 4
1
Publication Order Number:
NTMFS5C404NL/D
NTMFS5C404NL
ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise specified)
Parameter
Symbol
Test Condition
Min
Drain−to−Source Breakdown Voltage
V(BR)DSS
VGS = 0 V, ID = 250 mA
40
Drain−to−Source Breakdown Voltage
Temperature Coefficient
V(BR)DSS/
TJ
Typ
Max
Unit
OFF CHARACTERISTICS
Zero Gate Voltage Drain Current
IDSS
Gate−to−Source Leakage Current
V
21.6
VGS = 0 V,
VDS = 40 V
mV/°C
TJ = 25 °C
10
TJ = 125°C
250
IGSS
VDS = 0 V, VGS = 20 V
VGS(TH)
VGS = VDS, ID = 250 mA
100
mA
nA
ON CHARACTERISTICS (Note 4)
Gate Threshold Voltage
Threshold Temperature Coefficient
VGS(TH)/TJ
Drain−to−Source On Resistance
Forward Transconductance
RDS(on)
1.2
2.0
−6.2
VGS = 10 V
ID = 50 A
0.52
0.67
VGS = 4.5 V
ID = 50 A
0.75
1.0
gFS
VDS =15 V, ID = 50 A
V
mV/°C
270
mW
S
CHARGES, CAPACITANCES & GATE RESISTANCE
Input Capacitance
CISS
Output Capacitance
COSS
Reverse Transfer Capacitance
CRSS
12168
VGS = 0 V, f = 1 MHz, VDS = 25 V
4538
pF
79.8
Total Gate Charge
QG(TOT)
VGS = 4.5 V, VDS = 20 V; ID = 50 A
81
Total Gate Charge
QG(TOT)
VGS = 10 V, VDS = 20 V; ID = 50 A
181
Threshold Gate Charge
QG(TH)
Gate−to−Source Charge
QGS
8.5
nC
27.8
VGS = 4.5 V, VDS = 20 V; ID = 50 A
Gate−to−Drain Charge
QGD
Plateau Voltage
VGP
23.8
2.7
td(ON)
24
V
SWITCHING CHARACTERISTICS (Note 5)
Turn−On Delay Time
Rise Time
Turn−Off Delay Time
Fall Time
tr
td(OFF)
VGS = 4.5 V, VDS = 20 V,
ID = 50 A, RG = 1.0 W
tf
135
ns
87
157
DRAIN−SOURCE DIODE CHARACTERISTICS
Forward Diode Voltage
Reverse Recovery Time
Charge Time
Discharge Time
Reverse Recovery Charge
VSD
VGS = 0 V,
IS = 50 A
TJ = 25°C
0.7
TJ = 125°C
0.61
tRR
ta
tb
1.2
V
97.4
VGS = 0 V, dIS/dt = 100 A/ms,
IS = 50 A
QRR
46.5
ns
50.9
190
nC
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
4. Pulse Test: pulse width v 300 ms, duty cycle v 2%.
5. Switching characteristics are independent of operating junction temperatures.
www.onsemi.com
2
NTMFS5C404NL
TYPICAL CHARACTERISTICS
800
10 V to 3.2 V
280
3.0 V
700
ID, DRAIN CURRENT (A)
ID, DRAIN CURRENT (A)
240
200
160
2.8 V
120
80
500
400
300
100
0
0
0.5
1.0
2.0
1.5
2.5
TJ = 25°C
200
40
TJ = 125°C
TJ = −55°C
0
3.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
VGS, GATE−TO−SOURCE VOLTAGE (V)
Figure 1. On−Region Characteristics
Figure 2. Transfer Characteristics
0.0015
0.0014
0.0013
TJ = 25°C
ID = 50 A
0.0012
0.0011
0.0010
0.0009
0.0008
0.0007
0.0006
0.0005
0.0004
3
4
5
6
7
8
9
10
RDS(on), DRAIN−TO−SOURCE RESISTANCE (W)
0
RDS(on), DRAIN−TO−SOURCE RESISTANCE (W)
600
4.0
0.0010
VGS = 4.5 V
0.0008
0.0006
VGS = 10 V
0.0004
TJ = 25°C
0.0002
10
50
90
130
170
210
250
290
VGS, GATE VOLTAGE (V)
ID, DRAIN CURRENT (A)
Figure 3. On−Resistance vs. Gate−to−Source
Voltage
Figure 4. On−Resistance vs. Drain Current and
Gate Voltage
VGS = 10 V
ID = 50 A
1.9
TJ = 150°C
100k
IDSS, LEAKAGE (nA)
RDS(on), NORMALIZED DRAIN−TO−
SOURCE RESISTANCE (W)
1M
2.1
1.7
1.5
1.3
1.1
0.9
TJ = 125°C
10k
TJ = 85°C
1k
100
0.7
0.5
−50 −25
10
0
25
50
75
100
125
150
5
10
15
20
25
30
35
TJ, JUNCTION TEMPERATURE (°C)
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
Figure 5. On−Resistance Variation with
Temperature
Figure 6. Drain−to−Source Leakage Current
vs. Voltage
www.onsemi.com
3
40
NTMFS5C404NL
10
CISS
COSS
VGS = 0 V
TJ = 25°C
f = 1 MHz
CRSS
5
0
15
10
20
25
35
30
30
QT
25
8
20
6
15
4
QGD
QGS
2
0
40
10
VDS = 20 V
TJ = 25°C
ID = 50 A
0
20
40
60
80
100
120
140
5
0
160 180
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
QG, TOTAL GATE CHARGE (nC)
Figure 7. Capacitance Variation
Figure 8. Gate−to−Source and
Drain−to−Source Voltage vs. Total Charge
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
14k
13k
12k
11k
10k
9k
8k
7k
6k
5k
4k
3k
2k
1k
0
VGS, GATE−TO−SOURCE VOLTAGE (V)
C, CAPACITANCE (pF)
TYPICAL CHARACTERISTICS
10,000
46
IS, SOURCE CURRENT (A)
t, TIME (ns)
VGS = 4.5 V
VDD = 20 V
ID = 50 A
td(off)
1000
tf
tr
td(on)
100
41
36
31
26
TJ = 125°C
21
16
11
TJ = 150°C
TJ = 25°C
6
10
1
1000
TJ = −55°C
1
10
100
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
RG, GATE RESISTANCE (W)
VSD, SOURCE−TO−DRAIN VOLTAGE (V)
Figure 9. Resistive Switching Time Variation
vs. Gate Resistance
Figure 10. Diode Forward Voltage vs. Current
1000
TC = 25°C
VGS ≤ 10 V
0.01 ms
0.1 ms
100
100
dc
TJ(initial) = 25°C
IPEAK (A)
IDS (A)
1 ms
10 ms
TJ(initial) = 100°C
10
10
RDS(on) Limit
Thermal Limit
Package Limit
1
1
0.1
1
10
1E−04
100
1E−03
VDS (V)
TIME IN AVALANCHE (s)
Figure 11. Safe Operating Area
Figure 12. IPEAK vs. Time in Avalanche
www.onsemi.com
4
1E−02
NTMFS5C404NL
100
RqJA(t) (°C/W)
50% Duty Cycle
10
20%
10%
5%
1
2%
1%
NTMFS5C404NL 650 mm2, 2 oz., Cu Single Layer Pad
0.1
Single Pulse
0.01
0.000001
0.00001
0.0001
0.001
0.01
0.1
1
10
100
1000
PULSE TIME (sec)
Figure 13. Thermal Characteristics
DEVICE ORDERING INFORMATION
Device
Marking
Package
Shipping†
NTMFS5C404NLT1G
5C404L
DFN5
(Pb−Free)
1500 / Tape & Reel
NTMFS5C404NLT3G
5C404L
DFN5
(Pb−Free)
5000 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
www.onsemi.com
5
NTMFS5C404NL
PACKAGE DIMENSIONS
DFN5 5x6, 1.27P
(SO−8FL)
CASE 488AA
ISSUE M
2X
0.20 C
D
A
2
B
D1
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSION D1 AND E1 DO NOT INCLUDE
MOLD FLASH PROTRUSIONS OR GATE
BURRS.
2X
0.20 C
4X
E1
2
q
E
c
1
2
3
DIM
A
A1
b
c
D
D1
D2
E
E1
E2
e
G
K
L
L1
M
q
A1
4
TOP VIEW
C
SEATING
PLANE
DETAIL A
0.10 C
A
0.10 C
SIDE VIEW
0.10
8X b
C A B
0.05
c
DETAIL A
RECOMMENDED
SOLDERING FOOTPRINT*
e/2
1
STYLE 1:
PIN 1. SOURCE
2. SOURCE
3. SOURCE
4. GATE
5. DRAIN
2X
0.495
e
L
MILLIMETERS
MIN
NOM
MAX
0.90
1.00
1.10
0.00
−−−
0.05
0.33
0.41
0.51
0.23
0.28
0.33
5.15
5.00
5.30
4.70
4.90
5.10
3.80
4.00
4.20
6.00
6.15
6.30
5.70
5.90
6.10
3.45
3.65
3.85
1.27 BSC
0.51
0.575
0.71
1.20
1.35
1.50
0.51
0.575
0.71
0.125 REF
3.00
3.40
3.80
0_
−−−
12 _
4.560
2X
1.530
4
K
3.200
E2
PIN 5
(EXPOSED PAD)
G
L1
4.530
M
D2
1.330
2X
0.905
1
BOTTOM VIEW
0.965
4X
1.000
4X 0.750
1.270
PITCH
DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and the
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries.
SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed
at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation
or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets
and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each
customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended,
or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which
the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or
unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable
copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
6
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
NTMFS5C404NL/D