Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK HMC441LH5 v02.0508 LINEAR & POWER AMPLIFIERS - SMT 11 Typical Applications Features The HMC441LH5 is a medium PA for: Gain: 5 dB • Telecom Infrastructure Saturated Power: +21.5 dBm @ 25% PAE • Military Radio, Radar & ECM Single Positive Supply: +5V • Space Systems 50 Ohms Matched Input/Output • Test Instrumentation Hermetic SMT Package, 25mm2 Screening to MIL-PRF-38535 (Class B or S) Available Functional Diagram General Description The HMC441LH5 is a broadband 7 to 15.5 GHz GaAs PHEMT MMIC Medium Power Amplifier housed in a hermetic SMT leadless package. The amplifier provides 15 dB of gain and 21.5 dBm of saturated power at 25% PAE from a +5V supply. This 50 Ohm matched amplifier does not require any external components, and the RF I/Os are DC blocked, making it an ideal linear gain block or driver amplifier. The HMC441LH5 allows the use of surface mount manufacturing techniques and is suitable for high reliability military, industrial & space applications. Electrical Specifi cations, TA = +25° C, Vdd = 5V Parameter Min. Frequency Range Gain Typ. Max. Min. 7.0 - 8.0 11 Gain Variation Over Temperature 14 0.015 Typ. Max. Min. 8.0 - 13.0 13 0.02 16 0.015 Typ. Max. Min. 13.0 - 14.0 12 0.02 15 0.015 Typ. Max. 14.0 - 15.5 10.5 0.02 GHz 13.5 0.015 Units dB 0.02 dB/ °C Input Return Loss 11 13 10 8 dB Output Return Loss 10 15 14 12 dB 19 dBm 21 dBm dBm Output Power for 1 dB Compression (P1dB) Saturated Output Power (Psat) 11 - 80 GaAs PHEMT MMIC MEDIUM POWER AMPLIFIER, 7 - 15.5 GHz 15.5 18.5 17 20 20 16 21 19 16 21.5 Output Third Order Intercept (IP3) 30 32 32 32 Noise Figure 5.0 4.75 4.75 5.0 Supply Current (Idd) 90 115 90 115 90 115 90 dB 115 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com mA HMC441LH5 v02.0508 GaAs PHEMT MMIC MEDIUM POWER AMPLIFIER, 7 - 15.5 GHz Broadband Gain & Return Loss Gain vs. Temperature 20 20 15 16 5 GAIN (dB) RESPONSE (dB) 10 S21 S11 S22 0 -5 12 +25C +85C -40C 8 11 -10 4 0 -20 4 6 8 10 12 14 16 18 6 20 8 Input Return Loss vs. Temperature 14 16 18 0 +25C +85C -40C -5 RETURN LOSS (dB) RETURN LOSS (dB) 12 Output Return Loss vs. Temperature 0 -10 -15 -20 +25C +85C -40C -5 -10 -15 -20 6 8 10 12 14 16 18 6 8 FREQUENCY (GHz) 12 14 16 18 16 18 Psat vs. Temperature 23 21 21 Psat (dBm) 23 19 17 +25C +85C -40C 15 10 FREQUENCY (GHz) P1dB vs. Temperature P1dB (dBm) 10 FREQUENCY (GHz) FREQUENCY (GHz) LINEAR & POWER AMPLIFIERS - SMT -15 19 +25C +85C -40C 17 15 13 13 6 8 10 12 14 FREQUENCY (GHz) 16 18 6 8 10 12 14 FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 11 - 81 HMC441LH5 v02.0508 GaAs PHEMT MMIC MEDIUM POWER AMPLIFIER, 7 - 15.5 GHz Power Compression @ 12 GHz Output IP3 vs. Temperature 36 24 Pout Gain PAE 32 IP3 (dBm) 20 16 12 28 +25C +85C -40C 24 8 20 4 16 0 -10 -6 -2 2 6 10 6 8 10 12 14 16 18 16 18 FREQUENCY (GHz) INPUT POWER (dBm) Gain, Power & Output IP3 vs. Supply Voltage @ 12 GHz Noise Figure vs. Temperature 36 10 34 32 +25C +85C -40C 8 28 NOISE FIGURE (dB) 30 Gain P1dB Psat IP3 26 24 22 20 6 4 18 2 16 14 4.5 0 4.6 4.7 4.8 4.9 5 5.1 5.2 5.3 5.4 5.5 6 8 10 Vdd Supply Voltage (V) 12 14 FREQUENCY (GHz) Reverse Isolation vs. Temperature 0 -10 ISOLATION (dB) GAIN (dB), P1dB (dBm), Psat (dBm), IP3 (dBm) LINEAR & POWER AMPLIFIERS - SMT 11 Pout (dBm), GAIN (dB), PAE(%) 28 +25C +85C -40C -20 -30 -40 -50 6 8 10 12 14 16 18 FREQUENCY (GHz) 11 - 82 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC441LH5 v02.0508 Absolute Maximum Ratings Drain Bias Voltage (Vdd) +6 Vdc RF Input Power (RFIN)(Vdd = +5Vdc) +15 dBm Channel Temperature 175 °C Continuous Pdiss (T = 85 °C) (derate 8.4 mW/°C above 85 °C) 0.76 W Thermal Resistance (channel to ground paddle) 118.8 °C/W Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C GaAs PHEMT MMIC MEDIUM POWER AMPLIFIER, 7 - 15.5 GHz Typical Supply Current vs. Vdd Vdd (V) Idd (mA) +5.5 92 +5.0 90 +4.5 88 Note: Amplifier will operate over full voltage range shown above Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: CERAMIC & KOVAR 2. LEAD AND GROUND PADDLE PLATING: GOLD 40 - 80 MICROINCHES. 3. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE 5. PAD BURR LENGTH 0.15mm MAX. PAD BURR HEIGHT 0.25mm MAX. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 11 LINEAR & POWER AMPLIFIERS - SMT ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS 11 - 83 HMC441LH5 v02.0508 GaAs PHEMT MMIC MEDIUM POWER AMPLIFIER, 7 - 15.5 GHz Pin Descriptions Pin Number Function Description 1, 3-7, 9, 10, 12 GND These pins and package bottom must be connected to RF/DC ground. 2 RFIN This pin is AC coupled and matched to 50 Ohms. 8 RFOUT This pin is AC coupled and matched to 50 Ohms. 11 Vdd Power Supply Voltage for the amplifier. External bypass capacitors are recommended. LINEAR & POWER AMPLIFIERS - SMT 11 11 - 84 Interface Schematic Application Circuit Component Value C1 100 pF C2 1,000 pF C3 4.7 μF For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC441LH5 v02.0508 GaAs PHEMT MMIC MEDIUM POWER AMPLIFIER, 7 - 15.5 GHz Evaluation PCB List of Materials for Evaluation PCB 111560 [1] Item Description J1 - J2 PCB Mount SMA RF Connector, SRI U1 HMC441LH5 C1 100 pF Capacitor, 0402 Pkg. C2 1,000 pF Capacitor, 0603 Pkg. C3 4.7 μF Capacitor, Tantalum PCB [2] 111558 Evaluation Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com LINEAR & POWER AMPLIFIERS - SMT 11 11 - 85