NTMFS5C468NL D

NTMFS5C468NL
Power MOSFET
40 V, 10.3 mW, 37 A, Single N−Channel
Features
•
•
•
•
Small Footprint (5x6 mm) for Compact Design
Low RDS(on) to Minimize Conduction Losses
Low QG and Capacitance to Minimize Driver Losses
These Devices are Pb−Free and are RoHS Compliant
www.onsemi.com
V(BR)DSS
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
Symbol
Value
Unit
Drain−to−Source Voltage
VDSS
40
V
Gate−to−Source Voltage
VGS
±20
V
ID
37
A
Parameter
Continuous Drain
Current RqJC
(Notes 1, 3)
TC = 25°C
Power Dissipation
RqJC (Note 1)
Continuous Drain
Current RqJA
(Notes 1, 2, 3)
Steady
State
TC = 100°C
TC = 25°C
Power Dissipation
RqJA (Notes 1 & 2)
Steady
State
PD
Pulsed Drain Current
TA = 25°C, tp = 10 ms
G (4)
PD
S (1,2,3)
W
3.5
190
A
−55 to
+175
°C
IS
31
A
Single Pulse Drain−to−Source Avalanche
Energy (IL(pk) = 2 A)
EAS
95
mJ
Lead Temperature for Soldering Purposes
(1/8″ from case for 10 s)
TL
260
°C
THERMAL RESISTANCE MAXIMUM RATINGS
Symbol
Value
Unit
Junction−to−Case − Steady State
RqJC
5.3
°C/W
Junction−to−Ambient − Steady State (Note 2)
RqJA
43
1
DFN5
(SO−8FL)
CASE 488AA
STYLE 1
S
S
S
G
D
5C468L
AYWZZ
D
D
5C468L = Specific Device Code
A
= Assembly Location
Y
= Year
W
= Work Week
ZZ
= Lot Traceability
ORDERING INFORMATION
1. The entire application environment impacts the thermal resistance values shown,
they are not constants and are only valid for the particular conditions noted.
2. Surface−mounted on FR4 board using a 650 mm2, 2 oz. Cu pad.
3. Maximum current for pulses as long as 1 second is higher but is dependent
on pulse duration and duty cycle.
November, 2015 − Rev. 2
MARKING
DIAGRAM
D
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
© Semiconductor Components Industries, LLC, 2015
N−CHANNEL MOSFET
1.7
IDM
Parameter
D (5)
A
13
TJ, Tstg
Source Current (Body Diode)
37 A
17.6 mW @ 4.5 V
9.2
TA = 100°C
Operating Junction and Storage Temperature
10.3 mW @ 10 V
40 V
W
28
14
ID
TA = 100°C
TA = 25°C
ID MAX
26
TC = 100°C
TA = 25°C
RDS(ON) MAX
1
See detailed ordering, marking and shipping information in the
package dimensions section on page 5 of this data sheet.
Publication Order Number:
NTMFS5C468NL/D
NTMFS5C468NL
ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise specified)
Parameter
Symbol
Test Condition
Min
Drain−to−Source Breakdown Voltage
V(BR)DSS
VGS = 0 V, ID = 250 mA
40
Drain−to−Source Breakdown Voltage
Temperature Coefficient
V(BR)DSS/
TJ
Typ
Max
Unit
OFF CHARACTERISTICS
Zero Gate Voltage Drain Current
IDSS
Gate−to−Source Leakage Current
V
24
VGS = 0 V,
VDS = 40 V
mV/°C
TJ = 25 °C
10
TJ = 125°C
250
IGSS
VDS = 0 V, VGS = 20 V
VGS(TH)
VGS = VDS, ID = 250 mA
mA
100
nA
2.0
V
ON CHARACTERISTICS (Note 4)
Gate Threshold Voltage
Threshold Temperature Coefficient
VGS(TH)/TJ
Drain−to−Source On Resistance
Forward Transconductance
RDS(on)
1.2
−4.8
mV/°C
VGS = 10 V
ID = 20 A
8.6
10.3
VGS = 4.5 V
ID = 20 A
14.5
17.6
gFS
VDS = 15 V, ID = 20 A
33
mW
S
CHARGES, CAPACITANCES & GATE RESISTANCE
Input Capacitance
CISS
Output Capacitance
COSS
Reverse Transfer Capacitance
570
VGS = 0 V, f = 1 MHz, VDS = 20 V
230
VGS = 10 V, VDS = 20 V; ID = 20 A
7.3
CRSS
pF
11
Total Gate Charge
QG(TOT)
Total Gate Charge
QG(TOT)
3.4
Threshold Gate Charge
QG(TH)
0.9
Gate−to−Source Charge
QGS
Gate−to−Drain Charge
QGD
1.0
Plateau Voltage
VGP
3.4
td(ON)
7
VGS = 4.5 V, VDS = 20 V; ID = 20 A
nC
1.6
V
SWITCHING CHARACTERISTICS (Note 5)
Turn−On Delay Time
Rise Time
Turn−Off Delay Time
Fall Time
tr
td(OFF)
VGS = 4.5 V, VDS = 20 V,
ID = 20 A, RG = 1.0 W
tf
43
ns
11
2
DRAIN−SOURCE DIODE CHARACTERISTICS
Forward Diode Voltage
Reverse Recovery Time
VSD
TJ = 25°C
0.88
TJ = 125°C
0.79
tRR
Charge Time
ta
Discharge Time
tb
Reverse Recovery Charge
VGS = 0 V,
IS = 20 A
1.2
V
18
VGS = 0 V, dIS/dt = 100 A/ms,
IS = 20 A
QRR
9
ns
9
100
nC
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
4. Pulse Test: pulse width v 300 ms, duty cycle v 2%.
5. Switching characteristics are independent of operating junction temperatures.
www.onsemi.com
2
NTMFS5C468NL
TYPICAL CHARACTERISTICS
35
35
10 V to 4.0 V
30
ID, DRAIN CURRENT (A)
30
ID, DRAIN CURRENT (A)
VDS = 10 V
3.6 V
25
20
3.2 V
15
10
2.8 V
25
20
15
TJ = 25°C
10
5
5
0
0
TJ = 125°C
0.4
0.8
1.2
1.6
2.0
2.4
2.8
0
3
5
4
Figure 1. On−Region Characteristics
Figure 2. Transfer Characteristics
TJ = 25°C
ID = 20 A
45
40
35
30
25
20
15
10
5
0
4
5
6
7
8
9
10
VGS, GATE−TO−SOURCE VOLTAGE (V)
20
TJ = 25°C
18
16
VGS = 4.5 V
14
12
10
VGS = 10 V
8
6
4
2
0
10
20
30
40
60
50
70
80
ID, DRAIN CURRENT (A)
Figure 3. On−Resistance vs. Gate−to−Source
Voltage
Figure 4. On−Resistance vs. Drain Current and
Gate Voltage
2.0
1.E+05
1.9
VGS = 10 V
ID = 20 A
1.8
1.7
1.6
1.5
1.4
1.3
1.2
1.1
1.0
0.9
0.8
0.7
−50 −25
0
IDSS, LEAKAGE (A)
RDS(on), NORMALIZED DRAIN−TO−
SOURCE RESISTANCE
TJ = −55°C
2
VGS, GATE−TO−SOURCE VOLTAGE (V)
50
3
1
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
RDS(on), DRAIN−TO−SOURCE RESISTANCE (mW)
RDS(on), DRAIN−TO−SOURCE RESISTANCE (mW)
0
TJ = 175°C
1.E+04
1.E+03
TJ = 125°C
1.E+02
TJ = 85°C
1.E+01
25
50
75
100
125
150
175
5
10
15
20
25
30
35
TJ, JUNCTION TEMPERATURE (°C)
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
Figure 5. On−Resistance Variation with
Temperature
Figure 6. Drain−to−Source Leakage Current
vs. Voltage
www.onsemi.com
3
40
NTMFS5C468NL
TYPICAL CHARACTERISTICS
VGS, GATE−TO−SOURCE VOLTAGE (V)
1.E+03
C, CAPACITANCE (pF)
CISS
COSS
1.E+02
1.E+01
CRSS
VGS = 0 V
TJ = 25°C
f = 1 MHz
1.E+00
0
5
10
20
15
30
25
40
35
7
6
5
QGS
4
QGD
3
VDS = 20 V
ID = 20 A
TJ = 25°C
2
1
0
1
0
2
3
4
5
7
6
8
Figure 7. Capacitance Variation
Figure 8. Gate−to−Source vs. Total Charge
100
tr
VGS = 0 V
IS, SOURCE CURRENT (A)
td(off)
t, TIME (ns)
8
QG, TOTAL GATE CHARGE (nC)
tf
10
td(on)
VGS = 4.5 V
VDS = 20 V
ID = 20 A
1
10
10
TJ = 25°C
1
0.1
0.01
0.001
100
TJ = 125°C
0.2
0
TJ = −55°C
0.4
0.6
0.8
1.0
1.2
RG, GATE RESISTANCE (W)
VSD, SOURCE−TO−DRAIN VOLTAGE (V)
Figure 9. Resistive Switching Time Variation
vs. Gate Resistance
Figure 10. Diode Forward Voltage vs. Current
100
1000
1 ms
500 ms
100
10
10 ms
10
IPEAK, (A)
ID, DRAIN CURRENT (A)
QT
9
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
100
1
10
TC = 25°C
VGS ≤ 10 V
Single Pulse
1
0.1
0.1
1
TJ (initial) = 100°C
1
RDS(on) Limit
Thermal Limit
Package Limit
0.1
TJ (initial) = 25°C
10
1E−4
100
1E−3
VDS (V)
TIME IN AVALANCHE (s)
Figure 11. Safe Operating Area
Figure 12. IPEAK vs. Time in Avalanche
www.onsemi.com
4
1E−2
NTMFS5C468NL
TYPICAL CHARACTERISTICS
100
50% Duty Cycle
RqJA (°C/W)
10
1
20%
10%
5%
2%
1%
0.1
Single Pulse
0.01
0.000001
0.00001
0.0001
0.001
0.01
0.1
1
10
100
1000
PULSE TIME (sec)
Figure 13. Thermal Characteristics
DEVICE ORDERING INFORMATION
Device
Marking
Package
Shipping†
NTMFS5C468NLT1G
5C468L
DFN5
(Pb−Free)
1500 / Tape & Reel
NTMFS5C468NLT3G
5C468L
DFN5
(Pb−Free)
5000 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
www.onsemi.com
5
NTMFS5C468NL
PACKAGE DIMENSIONS
DFN5 5x6, 1.27P
(SO−8FL)
CASE 488AA
ISSUE L
2X
0.20 C
D
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSION D1 AND E1 DO NOT INCLUDE
MOLD FLASH PROTRUSIONS OR GATE
BURRS.
A
2
B
D1
2X
0.20 C
4X
E1
q
E
2
c
1
2
3
DIM
A
A1
b
c
D
D1
D2
E
E1
E2
e
G
K
L
L1
M
q
A1
4
TOP VIEW
0.10 C
3X
C
e
SEATING
PLANE
DETAIL A
A
RECOMMENDED
SOLDERING FOOTPRINT*
0.10 C
SIDE VIEW
8X
C A B
0.05
c
STYLE 1:
PIN 1. SOURCE
2. SOURCE
3. SOURCE
4. GATE
5. DRAIN
2X
DETAIL A
0.495
4.560
2X
b
0.10
MILLIMETERS
MIN
NOM
MAX
0.90
1.00
1.10
0.00
−−−
0.05
0.33
0.41
0.51
0.23
0.28
0.33
5.00
5.30
5.15
4.70
4.90
5.10
3.80
4.00
4.20
6.00
6.15
6.30
5.70
5.90
6.10
3.45
3.65
3.85
1.27 BSC
0.51
0.61
0.71
1.20
1.35
1.50
0.51
0.61
0.71
0.125 REF
3.00
3.40
3.80
0_
−−−
12 _
1.530
e/2
L
1
4
3.200
4.530
K
E2
PIN 5
(EXPOSED PAD)
L1
M
1.330
2X
0.905
1
0.965
G
D2
BOTTOM VIEW
4X
1.000
4X 0.750
1.270
PITCH
DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and the
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries.
SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed
at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation
or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets
and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each
customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended,
or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which
the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or
unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable
copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
6
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
NTMFS5C468NL/D