WILLAS FM120-M+ SE0504 THRU Low Capacitance TVS Array FM1200-M+ 1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS -20V- 200V SOD-123+ PACKAGE Pb Free Product Package outline Features • Batch process design, excellent power dissipation offers better reverse leakage current and thermal resistance. SOD-123H • Low profile surface mounted application in order to optimize board space. • Low power loss, high efficiency. General current capability, low forward voltage drop. • High Description capability. • High surge are surge rated diode arrays SE0504 • Guardring for overvoltage protection. designed to protect high speed data interfaces. This • Ultra high-speed switching. series• Silicon has epitaxial been specifically designed protect planar chip, metal silicon to junction. parts meet environmental standards • Lead-free sensitive components which are connected toofdata Features and by z Protects up to four I/O lines & power line ESD (electrostatic discharge), CDE (Cable Discharge z Low MIL-STD-19500 /228 transmission lines from overvoltage caused packing code suffix "G" • RoHS product for Halogen free product for packing code suffix "H" Mechanical data 0.012(0.3) Typ. Array of surge rated diodes with internal TVS z Diode 0.071(1.8) 0.056(1.4) Small package (2.4 x 2.2mm) saves board z space capacitance (<1pF) for high-speed interfaces Events), and EFT (electrical fast transients). • Epoxy : UL94-V0 rated flame retardant The unique design incorporates surge rated, low z • Case : Molded plastic, SOD-123H capacitance steering diodes and a TVS diode in a z, • Terminals :Plated terminals, solderable per MIL-STD-750 single package.Method During 2026transient conditions, the z steering diodes directbythe transient • Polarity : Indicated cathode band to either the Mounting Position : Any • positive side of the power supply line or to ground. • Weight TVS : Approximated 0.011 gram The internal diode prevents over-voltage on the 0.146(3.7) 0.130(3.3) 0.040(1.0) 0.024(0.6) No insertion loss to 2.0GHz 0.031(0.8) Typ. 0.031(0.8) Typ. Low leakage current and clamping voltage Low operating voltage: 5.0V Dimensions in inchestechnology and (millimeters) Solid-state silicon-avalanche Pb-Free package is available RoHS product for packing code suffix ”G” Halogen free product for packing code suffix “H” power line, protecting downstream MAXIMUMany RATINGS AND components. ELECTRICAL CHARACTERISTICS Moisture Sensitivity Level 1 z The low capacitance array configuration allows the Ratings at 25℃ ambient temperature unless otherwise specified. Single half wave, resistive ofdata inductive load. user phase to protect four60Hz, high-speed or transmission For capacitive load, derate current by 20% lines. The low inductance construction minimizes z z IEC61000-4-2(ESD) 15kV(air), 8kV(Contact) IEC61000-4-4(EFT) FM140-MH FM150-MH40A(5/50ns) FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH SYMBOL FM120-MH FM130-MH RATINGS voltage overshoot during high current surges. 12 13 14 15 16 18 10 115 120 IEC61000-4-5(Surge)24A(8/20us),Level2(Line-G Marking Code Applications Maximum Recurrent Peak Reverse Voltage z USB Maximum RMS2.0 Voltage Maximum DC Blocking z USB OTG Voltage Maximum Average Forward Rectified Current z Monitors and Flat Panel Displays z Forward Digital Visual Peak Surge CurrentInterface 8.3 ms single(DVI) half sine-wave superimposed on rated load (JEDEC method) z High-Definition Multimedia Typical Thermal Resistance (Note 2) z 14 VDC 20 Ports CHARACTERISTICS Functional diagram Maximum Forward Voltage at 1.0A DC 40 50 60 80 100 150 200 21 28 35 42 56 70 105 140 30 40 50 60 80 100 150 200 1.0 30 IFSM RΘJA TJ 40 120 -55 to +125 -55 to +150 - 65 to +175 TSTG SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH VF Maximum Average Reverse Current at @T A=25℃ Rated DC Blocking Voltage 30 round)& Level 2(Line- Line) IO CJ Typical Junction Capacitance (Note 1) Storage Temperature z IEEE 1394Range Firewire 20 VRMS Interface (HDMI) Gigabit Ethernet z SIM Ports Range Operating Temperature VRRM @T A=125℃ IR 0.50 0.70 0.85 0.5 0.9 0.92 10 NOTES: 1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC. 2- Thermal Resistance From Junction to Ambient SOT23-6 2013-07 2012-06 WILLAS ELECTRONIC CORP WILLAS ELECTRONIC CORP. WILLAS FM120-M+ SE0504 THRU Low Capacitance TVS Array FM1200-M+ 1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS -20V- 200V SOD-123+ PACKAGE Absolute Ratings Features Pb Free Produc Package outline dissipation offers • Batch process design, excellent power Symbol Parameter Value better reverse leakage current and thermal resistance. PPK Peak Pulsemounted Power application (tp = 8/20μs) surface in order to • Low profile optimize board space. IPP Peak Pulse Current (tp = 8/20μs) • Low power loss, high efficiency. T•J High current Operating Temperature capability, low forward voltage drop. High surge capability. • Tstg Storage Temperature Range • Guardring for overvoltage protection. Electrical Characteristics switching. • Ultra high-speed junction. • Silicon epitaxial planar chip, metalVsilicon BR • Lead-free parts meet environmental standards of MIL-STD-19500 /228 PartRoHS Numbers Min. Typ. Max. product for packing code suffix "G" • Halogen free product for packing code suffix "H" V Mechanical data V Units SOD-123H 120 6 W A 0.146(3.7) 0.130(3.3) -55 to +125 0.012(0.3) Typ. °C -55 to +150 °C 0.071(1.8) 0.056(1.4) C VRWM IT IR Typ. （Note1） V mA V µA pF 1 5 3 0.040(1.0) 0.024(0.6) 6.0 6.6 7.2 Epoxy : UL94-V0 rated flame retardant •SE0504 : Molded SOD-123H • Case Note 1: I/O pins are plastic, pin 1, 3, 4, and 6 , • Terminals :Plated terminals, solderable per MIL-STD-750 0.6 0.031(0.8) Typ. 0.031(0.8) Typ. Method 2026 Typical Characteristics • Polarity : Indicated by cathode band • Mounting Position : Any • Weight : Approximated 0.011 gram Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive of inductive load. For capacitive load, derate current by 20% RATINGS SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH Marking Code Maximum Recurrent Peak Reverse Voltage VRRM 12 20 13 30 14 40 15 50 16 60 18 80 10 100 115 150 120 200 Maximum RMS Voltage VRMS 14 21 28 35 42 56 70 105 140 Maximum DC Blocking Voltage VDC 20 30 40 50 60 80 100 150 200 IO Maximum Average Forward Rectified Current Peak Forward Surge Current 8.3 ms single half sine-wave IFSM vs. Pulse Time Fig1. Non-Repetitive Peak Pulse Power superimposed on rated load (JEDEC method) RΘJA Typical Thermal Resistance (Note 2) CJ Typical Junction Capacitance (Note 1) TJ Operating Temperature Range Storage Temperature Range Fig2. Power 1.0 30 Derating 40 120 -55 to +125 Curve -55 to +150 - 65 to +175 TSTG CHARACTERISTICS SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH VF Maximum Forward Voltage at 1.0A DC Maximum Average Reverse Current at @T A=25℃ Rated DC Blocking Voltage @T A=125℃ IR 0.50 0.70 0.85 0.9 0.5 0.92 10 NOTES: 1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC. 2- Thermal Resistance From Junction to Ambient Fig3. Pulse Waveform 2013-07 2012-06 Fig4. Clamping Voltage vs. Peak Pulse Current WILLAS ELECTRONIC CORP WILLAS ELECTRONIC CORP. WILLAS FM120-M+ SE0504 THRU Low Capacitance TVS Array FM1200-M+ 1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS -20V- 200V SOD-123+ PACKAGE Pb Free Product Package outline Features • Batch process design, excellent power dissipation offers better reverse leakage current and thermal resistance. SOD-123H • Low profile surface mounted application in order to optimize board space. • Low power loss, high efficiency. • High current capability, low forward voltage drop. • High surge capability. • Guardring for overvoltage protection. • Ultra high-speed switching. • Silicon epitaxial planar chip, metal silicon junction. • Lead-free parts meet environmental standards of 0.146(3.7) 0.130(3.3) 0.012(0.3) Typ. 0.071(1.8) 0.056(1.4) MIL-STD-19500 /228 • RoHS product for packing code suffix "G" Halogen free product for packing code suffix "H" Mechanical data Fig5. Forward Voltage vs. peak Pulse Current • Epoxy : UL94-V0 rated flame retardant • Case : Molded plastic, SOD-123H , • Terminals :Plated terminals, solderable per MIL-STD-750 0.040(1.0) Fig6. Capacitance vs. Reverse Voltage 0.024(0.6) (Normalized to 0V) 0.031(0.8) Typ. 0.031(0.8) Typ. Method 2026 Data SOT-23-6 Mechanical • Polarity : Indicated by cathode band .110(2.80) • Mounting Position : Any .122(3.10) • Weight : Approximated 0.011 gram Dimensions in inches and (millimeters) SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH Maximum Recurrent Peak Reverse Voltage VRRM 12 20 13 30 14 40 15 50 Maximum RMS Voltage VRMS 14 21 28 Maximum DC Blocking Voltage VDC 20 30 40 16 60 18 80 10 100 115 150 120 200 35 42 56 70 105 140 V 50 60 80 100 150 200 V IO Maximum Average Forward Rectified Current 1.0 30 .067(1.70) Peak Forward Surge Current 8.3 ms single half sine-wave .083(2.10) IFSM superimposed on rated load (JEDEC method) RΘJA Typical Junction Capacitance (Note 1) CJ Operating Temperature Range TJ Storage Temperature Range .000(0.01) -55 to +125 TSTG .051(1.30) CHARACTERISTICS ℃ -55 to +150 - 65 to +175 SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH U Maximum Forward Voltage at 1.0A DC .010(0.25) .020(0.50) Maximum Average Reverse Current at @T A=25℃ Rated DC Blocking Voltage 40 120 .036(0.90) .057(1.45) Typical Thermal Resistance (Note 2) .070(1.75) .098(2.50) RATINGS Marking Code .118(3.00) Ratings at 25℃ ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive of inductive load. For capacitive load, derate current by 20% .051(1.30) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS @T A=125℃ VF .033(0.85) .040(1.05) IR 0.50 0.70 0.85 0.5 0.9 0.92 10 m NOTES: 1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC. 2- Thermal Resistance From Junction to Ambient Dimensions in inches and (millimeters) Marking Type number SE0504 2013-07 2012-06 Marking code 05-4 WILLAS ELECTRONIC CORP WILLAS ELECTRONIC CORP. SE0504 Low Capacitance TVS Array Ordering Information: Device PN SE0504 ‐T(1)G(2)‐WS Packing Tape&Reel: 3 Kpcs/Reel Note: (1) Packing code, Tape & Reel (2) RoHS product for packing code suffix ”G”；Halogen free product for packing code suffix “H” ***Disclaimer*** WILLAS reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. WILLAS or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on WILLAS data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. WILLAS does not assume any liability arising out of the application or use of any product or circuit. WILLAS products are not designed, intended or authorized for use in medical, life‐saving implant or other applications intended for life‐sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of WILLAS. Customers using or selling WILLAS components for use in such applications do so at their own risk and shall agree to fully indemnify WILLAS Inc and its subsidiaries harmless against all claims, damages and expenditures. 2013-07 WILLAS ELECTRONIC CORP.