D^ϭϮ THRU D^ϭϮD ϭ͘Ϯ'>^^W^^/sd^hZ&DKhEdZ/'Zd/&/Z^ͲϱϬΕϭϬϬϬs PRIMARY CHARACTERISTICS MSBL VRRM 50V,100V,200V 400V,600V,800V,1000V I(AV) 1.2A VF 1.2V Marking Code :MSB12A~MSB12M Ex:MSB12M VYM MSB12M Logo 2 It 8.4 A sec TJ,Max 150℃ PACKAGE 2 Marking Code Date Code V:Product Lines Y:A.D. late code, EX : 4-2014,5-2015 M:Month, EX : 1-1,2-2,---10-O,11-N,12-D FEATURES MECHANICAL DATA Rated at 1000V PRV Case：Molded plastic,MSBL Compact, thin profile package design Polarity：As marked on body Ideal for SMT manufacturing Terminals :Plated terminals, Reliable robust construction solderable per Moisture Sensitivity Level 1 MIL-STD-750,Method 2026 Epoxy : UL94-V0 rated flame retardant GENERAL DESCRIPTION Suitable for AC to DC bridge full wave rectification for SMPS, LED lighting, adapter, battery charger, home appliances, office equipment, and telecommunication applications. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave ,60Hz, resistive or inductive load. For capacitive load, derate current by 20%. CHARACTERISTICS SYMBOL MSB12A MSB12B MSB12D MSB12G MSB12J MSB12K MSB12M UNIT Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current @TC =120℃ I(AV) 8.3ms TJ=25℃ 1.0ms Peak Forward Surge Current single half sine-wave IF=0.6A IF=1.2A Maximum Forward Voltage IF=0.6A IF=1.2A Maximum DC Reverse Current @T J=25℃ at Rated DC Blocking Voltage @T J=125℃ IFSM 1.2 45 90 1.1(MAX.) TA=25℃ VF TA=125℃ 1.2(MAX.) 0.78(TYP.) 0.85(TYP.) IR 5 500 V A A V V µA Typical junction Capacitance per element (Note 1) CJ 14 pF I2t Rating for fusing (1ms < t < 8.3ms) I2t 8.4 A2S RθJC 10 RθJL 30 RθJA 70 TJ -55 to +150 ℃ TSTG -55 to +150 ℃ Typical Thermal Capacitance (Note 2) Operating Temperature Range Storage Temperature Range ℃/W NOTES:(1). Measured at 1.0MHz and applied reverse voltage of 4.0V DC. (2). Thermal Resistance test performed in accordance with JESD-51. Unit mounted on glass-epoxy substrate with 1oz/ft2_10x10 mm copper pad per pin. 2015.0ϱ www.willas.com.tw Rev.Ś0ϭ D^ϭϮ THRU D^ϭϮD ϭ͘Ϯ'>^^W^^/sd^hZ&DKhEdZ/'Zd/&/Z^ͲϱϬΕϭϬϬϬs FIG. 2 – MAXIMUM NON-REPETITIVE SURGE CURRENT 1.2 PEAK FORWARD SURGE CURRENT AMPERES AVERAGE FORWARD CURRENT AMPERES FIG. 1 – FORWARD CURRENT DERATING CURVE 0.8 0.4 0 0 50 150 100 60 45 PULSE WIDTH 8.3ms SINGLE HALF-SINEWAVE 30 15 0 CASE TEMPERATURE,℃ 1 2 5 10 20 50 100 NUMBER OF CYCLES AT 60Hz FIG.3-TYPICAL FORWARD CHARACTERISTICS FIG.4 – TYPICAL JUNCTION CAPACITANCE 20 15 TJ = 125°C CAPACITANCE (pF) INSTANTANEOUS FORWARD CURRENT AMPERES 100 10 TJ = 25°C 1.0 10 TJ = 25°C,f = 1 MHz Level=1V 5 0 0.1 0 0.4 0.8 1.2 1.6 2.0 2.4 1 2.8 INSTANTANEOUS FORWARD VOLTAGE 4 10 100 REVERSE VOLTAGE,VOLTS INSTANTANEOUS REVERSE CURRENT,(µA) FIG.5- TYPICAL REVERSE CHARACTERISTICS 100 TJ=125°C 10 TJ=75°C 1.0 TJ=25°C 0.1 0.01 0 200 400 600 800 1000 1200 1400 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) 2015.0ϱ www.willas.com.tw Rev.Ś0ϭ D^ϭϮ THRU D^ϭϮD ϭ͘Ϯ'>^^W^^/sd^hZ&DKhEdZ/'Zd/&/Z^ͲϱϬΕϭϬϬϬs Outline Drawing MSBL Dimensions in inches and (millimeters) 2015.0ϱ www.willas.com.tw Rev.A Rev.Ś0ϭ ϭ͘Ϯ'>^^W^^/sd^hZ&DKhEdZ/'Zd/&/Z^ͲϱϬΕϭϬϬϬs D^ϭϮ THRU D^ϭϮD Ordering Information: Device PN Part Number ‐T(1)G(2)‐WS Note: (1) Packing code, Tape & Reel Packing Packing Tape&Reel: 3 Kpcs/Reel (2) RoHS product for packing code suffix ”G”；Halogen free product for packing code suffix “H” ***Disclaimer*** WILLAS reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. WILLAS or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on WILLAS data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. WILLAS does not assume any liability arising out of the application or use of any product or circuit. This is the preliminary specification. WILLAS products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of WILLAS. Customers using or selling WILLAS components for use in such applications do so at their own risk and shall agree to fully indemnify WILLAS Inc and its subsidiaries harmless against all claims, damages and expenditures. 2015.0ϱ www.willas.com.tw Rev.Ś0ϭ