WILLAS FM120-M+ THRU // FM1200-M+ 00mA SMALL SIGNAL SWITCHING DIODE - 50V 1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS -20V- 200V 0,1,0(/) PACKAGE Pb Free Product SOD-123+ PACKAGE Package outline Features • Batch process design, excellent power dissipation offers better reverse leakage current and thermal resistance. SOD-123H • Low profile surface mounted application in order to optimize board space. • Low power loss, high efficiency. • High current capability, low forward voltage drop. • High surge capability. Absolute Maximum Ratings (Ta=25°C) for overvoltage protection. • Guardring Items • Ultra high-speed switching. Symbol Ratings Unit Silicon epitaxial planar chip, metal silicon junction. • Reverse Voltage VR 50 V • Lead-free parts meet environmental standards of 0.146(3.7) 0.130(3.3) 0.012(0.3) Typ. m i n i -MEL F Reverse Recovery /228trr 4 ns MIL-STD-19500 Time • RoHS product for packing code suffix "G" Halogen free product for packing code suffix "H" mW Power Dissipation Ptot 500 .055(1.40)DIA. .063(1.60) 0.071(1.8) 0.056(1.4) Mechanical data Forward Current IFflame retardant 200 mA : UL94-V0 rated • Epoxy Junction Temp. Tj -55 to 150 °C : Molded plastic, SOD-123H • Case , Operating/Storage Tstg -55 to 150 °C • Terminals :Plated terminals, solderable per MIL-STD-750 0.040(1.0) 0.024(0.6) .020(0.50) .012(0.30) 0.031(0.8) Typ. .020(0.50) 0.031(0.8) Typ. .012(0.30) Method 2026 Mechanical • PolarityData : Indicated by cathode band .146(3.70) Dimensions in inches and (millimeters) Items Position : Any • MountingMaterials Mini MELF Package • Weight : Approximated 0.011 gram Case Hermetically sealed glass Lead/Finish MAXIMUM Double stud/Solder RATINGSPlating AND ELECTRICAL CHARACTERISTICS Chip Glass Passivated Moisture Sensitivity Level 1 Ratings at 25℃ ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive of inductive load. For capacitive load, derate current by 20% RATINGS Marking CodeCharacteristics Electrical (Ta=25°C) Ratings Maximum RMS Voltage Minimum Breakdown Voltage Maximum DC Blocking Voltage @IR= 100uA Maximum Average Forward Rectified Current Peak Forward Surge Current PW< 1sec. Peak Forward Surge Current 8.3 ms single half sine-wave superimposed onForward rated load (JEDEC method) Maximum Voltage Typical Resistance (Note 2) IF= Thermal 200mA Typical JunctionReverse CapacitanceCurrent (Note 1) Maximum Operating Temperature Range VR= 50V Storage Temperature Range Maximum Junction Capacitance Polarity: Color band denotes cathode end CHARACTERISTICS VRRM 12 20 13 30 VRMS 14 21 VDC 20 30 IO IFSM RΘJA CJ TJ 14 40 Symbol 28 BV 40 15 50 16 60 35 42 50 60 VF Ratings 56 75 80 40 120 -55 to +125 18 80 10 100 115 150 120 200 Volts 70 105 140 Volts 100 150 200 Volts 1.0 500 30 IFsurge TSTG IR 1.0 Unit V Amps mA Amps V ℃/W 100 -55 to +150 - 65 to +175 PF nA ℃ ℃ Cj FM150-MH FM160-MH FM180-MH 4 pF FM1200-MH UNIT FM1100-MH FM1150-MH SYMBOL FM120-MH FM130-MH FM140-MH VR= 0, f= 1 MHz VF Maximum Reverse Recovery Time Maximum Average Reverse Current at @T A=25℃ IR IF= 10mA, VR= 6V, IRR= @T 1mA, RL= 100 Ω A=125℃ Rated DC Blocking Voltage Maximum Thermal Resistance Maximum Forward Voltage at 1.0A DC Dimensions in millimeters SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UNIT Maximum Recurrent Peak Reverse Voltage .130(3.30) NOTES: 0.50 trr RθJA 0.70 0.5 10 4 0.35 0.85 0.9 ns 0.92 °C/mW 1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC. 2- Thermal Resistance From Junction to Ambient 2013-12 Volts WILLAS ELECTRONIC CORP. mAmps WILLAS FM120-M+ THRU // FM1200-M+ 00mA SMALL SIGNAL SWITCHING DIODE - 50V 1.0A SURFACE MOUNT SCHOTTKY BARRIER PACKAGE RECTIFIERS -20V- 200V 0,1,0(/) Pb Free Product SOD-123+ PACKAGE Package outline Features • Batch process design, excellent power dissipation offers better reverse leakage current and thermal resistance. SOD-123H • Low profile surface mounted application in order to Characteristics optimize board space.(Tj = 25_C unless otherwise specified) • MIL-STD-19500 /228 1 RoHS product for packing code suffix "G" Halogen free product for packing code suffix "H" Mechanical data 0.1 • Epoxy : UL94-V0 rated flame retardant • Case : Molded plastic, SOD-123HVR = 50 V 0.01 , • Terminals :Plated terminals, solderable MIL-STD-750 0 40 80 120 160 per 200 Method 2026 Tj – Junction Temperature ( °C ) Polarity : Indicated by cathode band 94 9100 • 0.146(3.7) 0.130(3.3) 1000 IF – Forward Current ( mA ) I R – Reverse Current ( mA ) • Low power loss, high efficiency. 100 current capability, low forward voltage drop. • High • High surge capability. overvoltage • Guardring forScattering Limit protection. 10 high-speed switching. • Ultra • Silicon epitaxial planar chip, metal silicon junction. • Lead-free parts meet environmental standards of 0.012(0.3) Typ. 0.071(1.8) 0.056(1.4) 100 Scattering Limit 10 1 0.040(1.0) 0.024(0.6) Tj = 25°C 0.031(0.8) Typ. 0.1 0 0.4 0.8 1.2 0.031(0.8) Typ. 2.0 1.6 VF – Forward Voltage ( V ) 94 9162 Dimensions in inches and (millimeters) Figure 1. Reverse Current Position : Any vs. Junction Temperature • Mounting Figure 2. Forward Current vs. Forward Voltage • Weight : Approximated 0.011 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive of inductive load. For capacitive load, derate current by 20% RATINGS SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UNIT Marking Code Maximum Recurrent Peak Reverse Voltage VRRM 12 20 13 30 14 40 15 50 16 60 18 80 10 100 115 150 120 200 Volts Maximum RMS Voltage VRMS 14 21 28 35 42 56 70 105 140 Volts Maximum DC Blocking Voltage VDC 20 30 40 50 60 80 100 150 200 Volts Maximum Average Forward Rectified Current IO IFSM Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) RΘJA Typical Thermal Resistance (Note 2) CJ Typical Junction Capacitance (Note 1) TJ Operating Temperature Range Storage Temperature Range 1.0 30 40 120 -55 to +125 Amps Amps ℃/W PF -55 to +150 ℃ - 65 to +175 TSTG ℃ CHARACTERISTICS SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UNIT VF Maximum Forward Voltage at 1.0A DC Maximum Average Reverse Current at @T A=25℃ Rated DC Blocking Voltage @T A=125℃ IR 0.50 0.70 0.85 0.5 10 0.9 0.92 Volts mAmps NOTES: 1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC. 2- Thermal Resistance From Junction to Ambient 2012-06 2013-12 WILLAS ELECTRONIC CORP. WILLAS ELECTRONIC CORP. WILLAS FM120-M+ THRU // FM1200-M+ 00mA SMALL SIGNAL SWITCHING DIODE - 50V 1.0A SURFACE MOUNT SCHOTTKY BARRIERPACKAGE RECTIFIERS -20V200V 0,1,0(/) Pb Free Product SOD-123+ PACKAGE Features Package outline Information: Batch process design, excellent power dissipation offers • Ordering better reverse leakage current and thermal resistance. Device PN Packing SOD-123H mounted application in order to • Low profile surface optimize board space. L L 4150‐T(1)G(2)‐WS Tape&Reel: 2.5 Kpcs/Reel 0.146(3.7) • Low power loss, high efficiency. 0.130(3.3) Note: (1) Packing code, Tape&Reel Packing current capability, low forward voltage drop. • High capability. • High surge (2) RoHS product for packing code suffix ”G”；Halogen free product for packing code suffix “H” • Guardring for overvoltage protection. • Ultra high-speed switching. • Silicon epitaxial planar chip, metal silicon junction. • Lead-free parts meet environmental standards of MIL-STD-19500 /228 • RoHS product for packing code suffix "G" Halogen free product for packing code suffix "H" 0.012(0.3) Typ. 0.071(1.8) 0.056(1.4) Mechanical data 0.040(1.0) 0.024(0.6) • Epoxy : UL94-V0 rated flame retardant • Case : Molded plastic, SOD-123H 0.031(0.8) Typ. , • Terminals :Plated terminals, solderable per MIL-STD-750 ***Disclaimer*** 0.031(0.8) Typ. Method 2026 WILLAS reserves the right to make changes without notice to any product Dimensions in inches and (millimeters) • Polarity : Indicated by cathode band specification herein, to make corrections, modifications, enhancements or other • Mounting Position : Any • Weight : Approximated 0.011 gram changes. WILLAS or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified. contained are intended to provide a product description only. "Typical" parameters Single phase half wave, 60Hz, resistive of inductive load. which may be included on WILLAS data sheets and/ or specifications can For capacitive load, derate current by 20% and do vary in different applications and actual performance may vary over time. SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UNIT RATINGS Marking CodeWILLAS does not assume any liability arising out of the application or 12 13 14 15 16 18 10 115 120 20 30 40 50 60 80 100 150 200 Maximum Recurrent Peak Reverse Voltage Volts VRRM use of any product or circuit. Volts 14 21 28 35 42 56 70 105 140 Maximum RMS Voltage VRMS Volts Maximum DC Blocking Voltage 20 30 40 50 60 80 100 150 200 VDC Amps Maximum Average Forward Rectified Current IO 1.0 WILLAS products are not designed, intended or authorized for use in medical, Peak Forward Surge Current 8.3 ms single half sine-wave life‐saving implant or other applications intended for life‐sustaining or other related 30 IFSM Amps superimposed on rated load (JEDEC method) applications where a failure or malfunction of component or circuitry may directly ℃/W 40 Typical Thermal Resistance (Note 2) RΘJA PF 120 Typical Junction Capacitance (Note 1) CJ or indirectly cause injury or threaten a life without expressed written approval -55 to +125 -55 to +150 Operating Temperature Range TJ ℃ of WILLAS. Customers using or selling WILLAS components for use in - 65 to +175 Storage Temperature Range TSTG ℃ such applications do so at their own risk and shall agree to fully indemnify WILLAS CHARACTERISTICS SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UNIT Inc and its subsidiaries harmless against all claims, damages and expenditures . Volts 0.9 Maximum Forward Voltage at 1.0A DC 0.92 VF 0.50 0.70 0.85 Maximum Average Reverse Current at @T A=25℃ Rated DC Blocking Voltage NOTES: @T A=125℃ IR 0.5 10 mAmps 1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC. 2- Thermal Resistance From Junction to Ambient 2012-06 2013-12 WILLAS ELECTRONIC CORP. WILLAS ELECTRONIC CORP.