VT1045C-M3, VIT1045C-M3, VT1045CHM3, VIT1045CHM3 www.vishay.com Vishay General Semiconductor Dual Low-Voltage Trench MOS Barrier Schottky Rectifier Ultra Low VF = 0.34 V at IF = 2.5 A FEATURES TMBS ® • Trench MOS Schottky technology TO-220AB TO-262AA • Low forward voltage drop, low power losses K • High efficiency operation • Solder dip 275 °C max. 10 s, per JESD 22-B106 • AEC-Q101 qualified 2 3 1 1 2 3 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 TYPICAL APPLICATIONS VT1045C VIT1045C PIN 1 PIN 2 PIN 1 PIN 2 PIN 3 CASE PIN 3 K For use in high frequency DC/DC converters, switching power supplies, freewheeling diodes, OR-ing diode, and reverse battery protection. MECHANICAL DATA Case: TO-220AB and TO-262AA Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS-compliant, and commercial grade Base P/NHM3 - halogen-free, RoHS-compliant, and AEC-Q101 qualified PRIMARY CHARACTERISTICS IF(AV) 2 x 5.0 A VRRM 45 V IFSM 100 A VF at IF = 5.0 A 0.41 V TJ max. 150 °C Package TO-220AB, TO-262AA Diode variations Common cathode Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 M3 suffix meets JESD 201 class 1A whisker test, HM3 suffix meets JESD 201 class 2 whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Maximum repetitive peak reverse voltage Maximum average forward rectified current (fig. 1) VRRM per device Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load per diode Operating junction and storage temperature range per diode IF(AV) VT1045C VIT1045C 45 10 5.0 UNIT V A IFSM 100 A TJ, TSTG -40 to +150 °C Revision: 12-May-16 Document Number: 89348 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VT1045C-M3, VIT1045C-M3, VT1045CHM3, VIT1045CHM3 www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS IF = 2.5 A Instantaneous forward voltage per diode TA = 25 °C IF = 5.0 A VF (1) IF = 2.5 A TA = 125 °C IF = 5.0 A Reverse current per diode SYMBOL TA = 25 °C VR = 45 V TA = 125 °C IR (2) TYP. MAX. 0.44 - UNIT 0.49 0.58 0.34 - 0.41 0.50 - 500 μA 5 15 mA VIT1045C UNIT V Notes (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: Pulse width 40 ms THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL per diode Typical thermal resistance per device RJC VT1045C 3.5 2.5 °C/W ORDERING INFORMATION (Example) PACKAGE PREFERRED P/N UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE TO-220AB VT1045C-M3/4W 1.87 4W 50/tube Tube TO-262AA VIT1045C-M3/4W 1.45 4W 50/tube Tube TO-220AB VT1045CHM3/4W (1) 1.87 4W 50/tube Tube TO-262AA VIT1045CHM3/4W (1) 1.45 4W 50/tube Tube Note (1) AEC-Q101 qualified Revision: 12-May-16 Document Number: 89348 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VT1045C-M3, VIT1045C-M3, VT1045CHM3, VIT1045CHM3 www.vishay.com Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 100 Instantaneous Reverse Current (mA) Average Forward Rectified Current (A) 12 10 8 6 4 2 0 100 TA = 150 °C 10 TA = 125 °C TA = 100 °C 1 0.1 0.01 TA = 25 °C 0.001 110 120 130 140 150 20 40 60 80 Percent of Rated Peak Reverse Voltage (%) Fig. 1 - Maximum Forward Current Derating Curve Fig. 4 - Typical Reverse Characteristics Per Diode 4.0 10 000 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p D = 0.8 3.5 D = 0.5 Junction Capacitance (pF) Average Power Loss (W) 100 Case Temperature (°C) 3.0 D = 0.3 2.5 D = 0.2 D = 1.0 2.0 D = 0.1 1.5 T 1.0 1000 0.5 D = tp/T tp 4 5 100 0 0 1 2 3 6 0.1 10 100 Reverse Voltage (V) Fig. 2 - Forward Power Loss Characteristics Per Diode Fig. 5 - Typical Junction Capacitance Per Diode 10 Transient Thermal Impedance (°C/W) 100 Instantaneous Forward Current (A) 1 Average Forward Current (A) TA = 150 °C 10 TA = 125 °C TA = 100 °C 1 TA = 25 °C 0.1 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 Junction to Case 1 0.1 0.01 0.1 1 10 100 Instantaneous Forward Voltage (V) t - Pulse Duration (s) Fig. 3 - Typical Instantaneous Forward Characteristics Per Diode Fig. 6 - Typical Transient Thermal Impedance Per Diode Revision: 12-May-16 Document Number: 89348 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VT1045C-M3, VIT1045C-M3, VT1045CHM3, VIT1045CHM3 www.vishay.com Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-220AB 0.415 (10.54) 0.380 (9.65) 0.185 (4.70) 0.175 (4.44) 0.161 (4.08) 0.139 (3.53) 0.055 (1.39) 0.045 (1.14) 0.113 (2.87) 0.103 (2.62) 1 PIN 2 0.635 (16.13) 0.625 (15.87) 3 0.160 (4.06) 0.140 (3.56) 0.603 (15.32) 0.573 (14.55) 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.560 (14.22) 0.530 (13.46) 0.035 (0.90) 0.028 (0.70) 0.104 (2.65) 0.096 (2.45) 0.205 (5.20) 0.195 (4.95) 0.022 (0.56) 0.014 (0.36) TO-262AA 0.185 (4.70) 0.175 (4.44) 0.411 (10.45) MAX. 30° (TYP.) (REF.) 0.250 (6.35) MIN. 0.055 (1.40) 0.047 (1.19) 0.055 (1.40) 0.045 (1.14) K 0.950 (24.13) 0.920 (23.37) 1 PIN 2 0.510 (12.95) 0.470 (11.94) 0.350 (8.89) 0.330 (8.38) 3 0.160 (4.06) 0.140 (3.56) 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.104 (2.65) 0.096 (2.45) 0.401 (10.19) 0.381 (9.68) 0.560 (14.22) 0.530 (13.46) 0.035 (0.90) 0.028 (0.70) 0.022 (0.56) 0.014 (0.35) 0.205 (5.20) 0.195 (4.95) Revision: 12-May-16 Document Number: 89348 4 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000