RS1010FS Product profile Surface Mount High Current Density Schottky General description Rectifiers 1.2 Amp 1000V Features Low forward voltage Reverse energy tested High current capability Extremely low thermal resistance Mechanical data Case: SOD-123 Molded plastic Epoxy: UL94V-O rate flame retardant Lead: Lead Formed for Surface Mount Polarity: Color band denotes cathode end Mounting position: Any Maximum Ratings (Tc=25°C unless otherwise noted) Parameter Symbol RS1010FS Unit Maximum repetitive peak reverse voltage VRRM 1000 V RMS Voltage (Max.) VRMS 700 V Working peak reverse voltage VRWM 1000 V Maximum average forward rectified current IF(AV) 1.2 A IFSM 30 A TJ -55 to +150 °C TSTG -55 to +150 °C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Operating junction temperature range Storage temperature range THERMAL CHARACTERISTICS Parameter Symbol Value Unit Typical thermal resistance RθJA 42 °C/W Notes: (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: Pulse width ≤ 40 ms Publication Order Number: RS1010FS ©Bruckewell Technology Corporation Rev. A -2014 RS1010FS Electrical characteristics (Tc=25°C unless otherwise noted) OFF CHARACTERISTICS Parameter Symbol Instantaneous forward voltage at IF=1.2A, Tj=25°C VF Value Unit Typical Max 1.1 1.25 V Maximum reverse current Tj=25°C IR at working peak reverse voltage Tj=125°C Reverse recovery time At IF=500mA IR=1.00A Irr=0.25 Junction Capacitance @ DC 5V trr CJ 2 uA 2 mA 500 nS 4 pF DEVICE MARK RS1010FS Publication Order Number: RS1010FS ©Bruckewell Technology Corporation Rev. A -2014 RS1010FS Characteristic Curves Publication Order Number: RS1010FS ©Bruckewell Technology Corporation Rev. A -2014 RS1010FS Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Bruckewell disclaims (i) Any and all liability arising out of the application or use of any product. (ii) Any and all liability, including without limitation special, consequential or incidental damages. (iii) Any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Publication Order Number: RS1010FS ©Bruckewell Technology Corporation Rev. A -2014