ESMFxx

ESMFxx
4-Line Transient Voltage Suppressor Array
Description
The Standard TVS are designed to low voltage,
integrated circuits from transients caused by electrostatic
discharge (ESD), electrical fast transients (EFT) and
other induced voltages.
Applications
• Computer Notebooks
• Communication Systems & Cellular Phones
• Printers
• Personal Digital Assistant(PDA)
• Video Equipment
Complies with the following standards
IEC61000-4-2
Level 4 15 kV (air discharge)
8 kV(contact discharge)
MIL STD 883E - Method 3015-7 Class 3
25 kV HBM (Human Body Model)
Features
• 100 W Peak Pulse Power per Line (tp=8/20μs)
• Monolithic Structure
• Available in 4 Voltage Types:5V to 24V
• Low Clamping Voltage
• ESD Protection > 40 kilovolts
• Low Leakage Current
• Protects up to Four (4) Bidirectional Lines and
• Five(5) Unidirectional Lines
• RoHS compliant package
Packing Information
Graphic symbol
3,000/Reel
Publication Order Number: [ESMFxx]
© Bruckewell Technology Corporation Rev. A -2014
ESMFxx
4-Line Transient Voltage Suppressor Array
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Absolute ratings @25°C Unless Otherwise Specified
Symbol
Parameter
Value
Unit
100
W
PPP
Peak Pulse Power (tp = 8/20μs) See Figure 1
TJ
Operating Supply Voltage (pin-1,-2 to pin-3)
-55 to +150
°C
TSTG
Storage Temperature Range
-55 to +150
°C
Electrical Characteristics
Min.
V
VBR
Typ.
V
ESMF3V3
5.3
ESMF05
ESMF12
Part Numbers
Max.
V
Ir
VRWM
IR
mA
V
uA
C
TYP
PF
5.6
5.88
1
3.3
1
50
6.1
6.7
7.2
1
5
1
35
13.3
14.5
15
1
12
1
30
Publication Order Number: [ESMFxx]
© Bruckewell Technology Corporation Rev. A -2014
ESMFxx
4-Line Transient Voltage Suppressor Array
■Typical
Device Characteristics
FIG.1-NON-REPETITIVE PEAK PULSE
POWER VS. TIME
FIG.2-POWER DERATING CURVE
FIG.3-POWER WAVEFORM
FIG.4-CLAMPING VOLTAGE VS. PEAK PULSE CURRENT
Publication Order Number: [ESMFxx]
© Bruckewell Technology Corporation Rev. A -2014
ESMFxx
4-Line Transient Voltage Suppressor Array
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE
WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or
their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or
incompleteness contained in any datasheet or in any other disclosure relating to any product.
Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products
for any particular purpose or the continuing production of any product. To the maximum extent
permitted by applicable law, Bruckewell disclaims
(i) Any and all liability arising out of the application or use of any product.
(ii) Any and all liability, including without limitation special, consequential or incidental damages.
(iii) Any and all implied warranties, including warranties of fitness for particular purpose,
non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on
Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in
generic applications.
Such statements are not binding statements about the suitability of products for a particular
application. It is the customer’s responsibility to validate that a particular product with the properties
described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance
may vary over time.
Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of
purchase, including but not limited to the warranty expressed therein.
Publication Order Number: [ESMFxx]
© Bruckewell Technology Corporation Rev. A -2014