21,59 0,850 MAX 8 1 0,2 A 8,0 max. 1:1 TD+ P1 CT P4 A TD- P2 A 13,63 0,537 A PCB 3,05 ±0,500 0,120 ±0,020 +0,008 0,625 - 0,008 A 2,00 mm ( nominal ) +0,20 15,88 -0,20 ELECTRICAL SCHEMATIC - M6A01 10/100 BASE TX WITH REMOTE POWER ELEKTRISCHER SCHALTPLAN CABLE A J1 TX+ 1:1 RD+ P3 CT P5 RD- P6 J2 TX- A J3 RX+ J6 RX- 2x 1000pF/2KV GND P7 2x 75 Ω N/C P8 PW+ P9 3,2 max. A 11,43 ±0,13 0,450 ±0,005 PW- P10 10,89 0,429 2,54 0,100 0,89 ±0,07 0,035 ±0,003 x10 0,64 0,025 2 5 4 7 6 9 8 10 3,25 ±0,07 0,128 ±0,003 x2 INSERTION LOSS: 0.1-100 MHz -1.1 dB MAX RETURN LOSS: 0.5 - 30 MHz 40 MHz 50 MHz 60 - 80 MHz -18 dB MIN -15.5 dB MIN -13.6 dB MIN -12 dB MIN CROSSTALK: 1-100 MHz -40 dB TYP CMR: 0.1 - 30 MHz 30 - 60 MHz 60 - 100 MHz -50 dB TYP -40 dB TYP -35 dB TYP ISOLATION 1500 Vrms 3,05 0,120 OCL(100 KHz, 0.1 Vrms, 8 mA) (P1-P2 : P3-P6) 350µH MIN 11,43 0,450 A PCB EDGE LP NOTE 1: PANEL GROUND FLANGES BOTH SIDES, TOP AND BOTTON (GF5) NOTE 2: SIDE GROUND TABS REAR OF PEG 3.05mm (R) NOTE 3: PIN 7 SOLDER PAD TO BE UNDERSIZED TO MEET ISOLATION REQUIREMENT NOTE 4: RoHS COMPLIANT NOTE 5: DESIGNED FOR PoE APPLICATIONS, IEEE802.3af NOTE 6: COMPLIANT TO IEEE 802.3u STANDARDS NOTE 7: COMPATIBLE TO LEAD-FREE WAVE SOLDERING PROCESS 15,49 0,610 MATERIALS AND FINISH HOUSING: GLASS FILLED POLYESTER UL 94 V-0 BLACK SHIELDING: Cu ALLOY, PLATED WITH Ni CONTACTS: PHOSPHOR BRONZE CONTACT FINISH: Au, 0.8µm [30µin] OVER Ni TERMINAL FINISH: Sn MATTE A DURABILITY : 1000 MATING CYCLES OPERATING TEMPERATURE: 0°C TO 70°C Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. (P3-P6 : J3-J6) 3 16,66 0,656 8,89 0,350 (P1-P2 : J1-J2) 1 1CT : 1CT ±3% 2,54 0,100 TURNS RATIO: 2x HD01 RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN AUSSCHNITT 0,38 ±0,10 0,015 ±0,004 MAGNETICS SPECIFICATIONS @ 25°C J7,8 1,27 0,050 1,60 ±0,07 0,063 ±0,003 x2 J4,5 14,72 0,580 RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE) TOL ±0.05 [.002] UNLESS NOTED Tolerances Information: SCHEMATIC NUMBER: M6A01 All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. ±0,2 mm ( if not specified ) Scale in mm [in] Designation Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJIM 8C10T, 1x1, INTEGRATED MAGNETICS 203506 www.ERNI.com A 2:1 All Dimensions 19.08.2008 Class MJIM I (1/1) A3