81,28 ±0,13 3,200 ±0,005 IMPROVED CONTACT DESIGN (PRE BEND) 87,13 3,430 28,50 1,122 MAX 1 8 1 8 1 8 1 8 1 8 1 1 8 1 8 1 8 1 8 1 8 1 8 3,20 ±0,30 0,126 ±0,012 8 25,50 1,004 MAX 5 x 13.97 [.550] = (69,85 2,750 ) 10,89 0,429 NOTE NOTE NOTE NOTE Mate ri al s & F i n i sh Insulation body Contact material Contact finish, mating zone Contact finish termination zone Shell/shield material Plating shield / shielding pin Stan d ard ap p l i c . Standard description Standard description Thickness of plating Thickness of plating Standard description Asse mb l y p ro c e ss Packaging Solder temperature Suitable assembly process Ap p ro v al s UL insulation body UL File No. RoHS compliant UL 94 Val u e T e st D ata Stan d ard ap p l i c . Val u e PA66 Me c h an i c al p ro p e rti e s . C5210 (acc. JIS) Insertion/withdrawal force IEC 603-7 max. 20 N 30 µin Au over 50 µin Ni Mechanical operations IEC 512-5, 9a min. 1.000 80 µin matte Sn over 50 µin Ni Effectiveness of connector SUS301 (acc. JIS) coupling device IEC 512-8, 15f 50 N 50 µin Ni / 80 µin Sn El e c tri c al p ro p e rti e s Cre e p ag e / c l e aranc e d i stan c e s a) Contact - contact IEC 807-3 0,52 mm Tray b) Contact - shell IEC 807-3 min. 1,0 mm. 235°C at 3-5s Vo l tag e p ro o f (D i e l e c tri c Wi th stand Vo l tag e ) wave a) Contact - contact IEC 512-2, 4a min. 1.000 V AC/DC b) Contact - shell/testpanel IEC 512-2, 4a min. 1.500 V AC/DC Current carrying capacity IEC 512-3, 5b 1,5 A @ 25° C V0 Contact resistance IEC 512-2, 2a max. 30 mOhm E145613 Insulation resistance IEC 512-2, 3a min. 500 MOhm Yes En v i ro n me n tal p ro p e rti e s Operation temperature 0 - 70° C Copyright by ERNI Production GmbH & Co. KG Proprietary notice pursuant to ISO 16016 to be observed. T e chnical sp e cif icat io ns 1: PANEL GROUND FLANGES TOP, BOTTOM, SIDES (GF9) 2: GROUNDING PIN BETWEEN EACH PORT (T) 3: 3 SIDE GROUND PINS EACH SIDE, STAGGERED (S1) 4: RoHS COMPLIANT PART NO. IDENT. NR. TRANSMISSION REQUIREMENT ÜBERTRAGUNGSANFORDERUNG 133076 CATEGORY 5E Tolerances Information: Scale 2:1 All Dimensions in mm [in] All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJD 8P8C, 2X6 133888 www.ERNI.com c 07.05.2015 Index Date Class MJ I (1/2) A3 RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN-AUSSCHNITT RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE) TOL. 0.05 [0.002] UNLESS NOTED 88,01 ±0,20 3,465 ±0,008 80,01 3,150 68,58 2,700 0,38 ±0,10 0,015 ±0,004 52,07 2,050 40,64 1,600 38,10 1,500 26,67 1,050 26,16 1,030 66,04 2,600 54,61 2,150 TOP OF PCB LP 24,13 0,950 12,70 0,500 10,16 0,400 1,27 0,050 8 1 8 8 8 7 0 ,0 63 ± 0 0 ,0 3 1 X1 8 1 1 3, 25 2,13 0,084 8 0± 0, 0 ± ±0,0 7 8± 0,12 3 0,00 X2 11,40 0,449 1 1 8 1, 6 35 8,89 0,350 8 9± 0, 0 5,85 0,230 8 1 1 1 0, 8 7 0 ,0 2,54 0,100 8 1 2,13 0,084 2,79 0,110 2,79 0,110 81,28 3,200 1:1 Copyright by ERNI Production GmbH & Co. KG Proprietary notice pursuant to ISO 16016 to be observed. 8 1 4,57 0,180 1 1 8 9,15 0,360 15,46 0,609 17,19 0,677 2,54 0,100 2,54 0,100 6 X9 03 0 ,0 Scale Tolerances Information: 1:1 All Dimensions in mm [in] All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJD 8P8C, 2X6 133888 www.ERNI.com c 07.05.2015 Index Date Class MJ I (2/2) A3