RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN AUSSCHNITT 31.12 [1.225] 14.89 [.586] 0.38±0.10 [.015±.004] 21.39 [.842] 32.22±0.20 [1.269±.008] TOP OF PCB LP 8 1 8 13.80 [.543] 1 3.20±0.30 [.126±.012] 13.97 [.550] 10.89 [.429] 25.40±0.13 [1.000±.005] RECOMMENDED PCB LAYOUT - COMPONENT SIDE VIEW EMPFOHLENER FUER LEITERPLATTE - BESTUCKUNGSSEITE ALL TOLERANCES ±0.05 UNLESS NOTED 2.54 [.100] 1.27 [.050] ˚0.89±.07 [ ˚.035±.003] X20 1 1 ˚.128±.003] X2 10 10 ˚.063±.003] X2 3.68 [.145] ˚1.60±0.07 [ 2.73 [.107] 8.89 [.350] ˚3.25±0.07 [ 2.54 [.100] 25.40 [1.000] 11.43 [.450] ELECTRICAL SCHEMATIC 10/100 BASE TX - M6B01 ELEKTRISCHES DIAGRAMM 2.73 [.107] PCB MAGNETIC SPECIFICATIONS @ 25˚C AUTO MDIX COMPATIBLE TURNS RATIO (P4-P5:J1-J2) 1CT:1CT ± 3% (P7-P8:J3-J6) 1CT:1CT ± 3% OCL (100 KHz, 0.1 Vrms, 8 mA) (P4-P5:P7-P8) 350 µH MIN DCR (P4-P5:P7-P8) INSERTION LOSS 0.9 OHMS MAX 0.1-100 MHz RETURN LOSS 0.5-30 MHz 40 MHz 50 MHz 60-80 MHz CROSSTALK (0.1-100 MHz) CMR (0.1-100 MHz) ISOLATION -1.1 dB MAX CABLE 1:1 RD+ P4 CT P6 RD- P5 J1 RX+ J2 RX- 1:1 TD+ P7 CT P9 TD- P8 J3 TX+ J6 TX- P2 PW P1 -18 dB MIN -15.5 dB MIN -13.6 dB MIN -12 dB MIN -38 dB TYP -38 dB TYP 1,500 Vrms N/C P3 J4,5 J7,8 GND P10 2 X 75 W 1000pF/2KV MATERIALS AND FINISH NOTE 1. SIDE SHIELD TABS IN FRONT 3.68mm (F2) HOUSING: GLASS FILLED POLYESTER UL 94 V-0 BLACK NOTE 2: PANEL GROUND FLANGES BOTH SIDES, BOTTOM AND TOP (GF5) SHIELDING: Cu ALLOY, PLATED WITH Ni Information: MECHANICAL CHARACTERISTICS DURABILITY: 1000 MATING CYCLES ELECTRICAL CHARACTERISTICS CONTACT RESISTANCE: 30 MILLIOHMS MAX OPERATING TERMPERATURE: 0˚C TO 70˚C Consider protection memo from DIN 34 TERMINAL FINISH: SnPb All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. - in mm [in] Subject to modification without Designation MOD JACK - MJIM prior notice. Drawing will not be updated. 8C10T, 1X2, INTEGRATED MAGNETICS ERNI Components - - Rev. Date 2:1 All Dimensions SCHEMATIC NUMBER: M6B01 CONTACT FINISH: Au, 0.8µm [30µin], OVER Ni Scale Tolerances CONTACTS: PHOSPHOR BRONZE 203280 CHESTER, VA U.S.A. Group/Type MJIM I