MAX 21,59 0,850 1 8 1 8 1 8 1 3,05 ±0,50 0,120 ±0,020 3 x 13.97[0.550] = (41,91 1,650 ) 8 13,80 0,543 59,09 2,326 10,89 0,429 53,34 ±0,13 2,100 ±0,005 RECOMMENDED PCB LAYOUT - COMPONENT SIDE VIEW EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTÜCKUNGSSEITE) ALL TOLERANCES ±0.05 [.002] UNLESS NOTED 52,07 2,050 40,64 1,600 38,10 1,500 26,67 1,050 24,13 0,950 2,54 0,100 12,70 0,500 10,16 0,400 8 10,16 0,400 8 1 8 8 1 1 3,25 ±0,07 0,128 ±0,003 x2 1 1,27 0,050 1,60 ±0,07 0,063 ±0,003 x5 0,89 ±0,07 0,035 ±0,003 x32 3,68 0,145 8,89 0,350 2,54 0,100 2,73 0,107 2,73 0,107 53,34 2,100 NOTE 1: SIDE SHIELD TABS IN FRONT 3.68mm (F2) NOTE 2: REAR SHIELD TABS BETWEEN EACH PORT (T) NOTE 3: PANEL GROUND FLANGES BOTH SIDES AND TOP (GF5) NOTE 4: RoHS COMPLIANT MATERIALS AND FINISH SHIELDING: Cu ALLOY, PLATED WITH Ni CONTACTS: PHOSPHOR BRONZE CONTACT FINISH: Au, 0.8µm [30µin] OVER Ni TERMINAL FINISH: Sn MATTE MECHANICAL CHARACTERISTICS DURABILITY: 1000 MATING CYCLES OPERATING TERMPERATURE: 0°C TO 70°C Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. HOUSING: GLASS FILLED POLYESTER UL 94 V-0 BLACK Information: SCHEMATICS NUMBER: M2A01 Scale Tolerances 2:1 All Dimensions in mm [in] All rights reserved. Only for Information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJIM 8C8T, 1x4, INTEGRATED MAGNETICS 203157 www.ERNI.com E 02.05.2006 Index Date Class MJIM I (1/2) A3 0,38 ±0,10 0,015 ±0,004 RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN AUSSCHNITT 14,89 0,586 60,19 ±0,20 2,370 ±0,008 TOP OF PCB LP ELECTRICAL SCHEMATICS 10 BASE T - M2A01 ELEKTRISCHER SCHALTPLAN CABLE PCB P1 J1 P4 P2 J2 P3 J3 P5 P6 J6 MAGNETICS SPECIFICATIONS AT 25° C TURNS RATIO (P1-P2:J1-J2) (P3-P6:J3-J6) OCL (100 KHz, 0.1 Vrms) Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. (P1-P2, P3-P6) DCR (P1-P2, P3-P6) RETURN LOSS 5-10 MHz CROSSTALK (0.1-10 MHz) CMR (0.1-10 MHz) ISOLATION Information: 1CT: 1±3% 1CT: 1±3% 100 µH TYP 0.9 Ω MAX -20 dB TYP -40 dB MIN -40 dB MIN 1500 Vrms Tolerances Scale 2:1 All Dimensions in mm [in] All rights reserved. Only for Information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJIM 8C8T, 1x4, INTEGRATED MAGNETICS 203157 www.ERNI.com Class MJIM I (2/2) A3