21,59 0,850 MAX ELECTRICAL SCHEMATIC - M6A01 10/100 BASE TX WITH REMOTE POWER ELEKTRISCHER SCHALTPLAN PCB J1 TX+ CT P4 TD- P2 J2 TXJ3 RX+ J6 RX2x 1000pF/2KV 13,63 0,537 8 1 TD+ P1 RD+ P3 CT P5 RD- P6 3,05 ±0,500 0,120 ±0,020 15,88 0,625 CABLE GND P7 2 x 75 Ω N/C P8 PW+ P9 10,89 0,429 11,43 ±0,13 0,450 ±0,005 PW- P10 J4,5 RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE) TOL ±0.05 [.002] UNLESS NOTED 0,64 0,025 (P3-P6 : J3-J6) 10 3,25 ±0,07 0,128 ±0,003 x2 DCR (P1-P2, P3-P6) 0.9 OHMS MAX INSERTION LOSS: 0.1-100 MHz -1.1 dB MAX RETURN LOSS: 0.5 - 30 MHz 40 MHz 50 MHz 60 - 80 MHz -18 dB MIN -15.5 dB MIN -13.6 dB MIN -12 dB MIN CROSSTALK: 1-100 MHz -38 dB TYP CMR: 0.1 - 30 MHz 30 - 60 MHz 60 - 100 MHz -50 dB TYP -40 dB TYP -30 dB TYP ISOLATION 1500 Vrms 3,05 0,120 OCL(100 KHz, 0.1 Vrms, 8 mA) (P1-P2 : P3-P6) 350µH MIN 11,43 0,450 8,89 0,350 (P1-P2 : J1-J2) 1 1CT : 1CT ±3% 2,54 0,100 TURNS RATIO: PCB EDGE LP NOTE 1: PANEL GROUND FLANGES BOTH SIDES AND TOP (GF5) NOTE 2: SIDE GROUND TABS REAR OF PEG 3.05mm (R) NOTE 3: PIN 7 PAD TO BE UNDERSIZED TO MEET ISOLATION REQUIREMENT NOTE 4: RoHS COMPLIANT 15,49 0,610 HOUSING: GLASS FILLED POLYESTER UL 94 V-0 BLACK SHIELDING: Cu ALLOY, PLATED WITH Ni CONTACTS: PHOSPHOR BRONZE CONTACT FINISH: Au, 0.8µm [30µin] OVER Ni d OPERATING TEMPERATURE: 0°C TO 55°C c b Scale Tolerances Information: SCHEMATIC NUMBER: M6A01 MATERIALS AND FINISH TERMINAL FINISH: Sn MATTE 16,66 0,656 Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. 1,60 ±0,07 0,063 ±0,003 x2 MAGNETICS SPECIFICATIONS @ 25°C 0,38 ±0,10 0,015 ±0,004 1,27 0,050 14,72 0,580 2,54 0,100 0,89 ±0,07 0,035 ±0,003 x10 J7,8 RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN AUSSCHNITT 2:1 ISO 2768-m All Dimensions in mm [in] All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJIM 8C10T, 1x1, INTEGRATED MAGNETICS 203176 www.ERNI.com Index E Date 15.01.08 Class MJIM I (1/1) A3