Data Sheet No. PD10062 revE Series PVG612A & PbF Microelectronic Power IC HEXFET Power MOSFET Photovoltaic Relay ® Single Pole, Normally Open, 0-60V, 2.0A AC/ 4.0 A DC General Description The PVG612A Series Photovoltaic Relay is a singlepole, normally open solid-state relay that can replace electromechanical relays in many applications. It utilizes International Rectifier’s proprietary HEXFET power MOSFET as the output switch, driven by an integrated circuit photovoltaic generator of novel construction. The output switch is controlled by radiation from a GaAlAs light emitting diode (LED) which is optically isolated from the photovoltaic generator. These units exceed the performance capabilities of electromechanical relays in operating life, sensitivity, stability of on-resistance, miniaturization, insensitivity to magnetic fields and ruggedess. The compact PVG612A is particularly suited for isolated switching of high currents from 12 to 48 Volt AC or DC power sources. Series PVG612A Relays are packaged in a 6-pin, molded DIP package with either thru-hole or surface mount (gull-wing) terminals. It is available in standard plastic shipping tubes or on tape-and-reel. Please refer to Part Identification information opposite. Features ! ! ! ! ! ! ! Bounce-free operation High load current capacity High off-state resistance Linear AC/DC operation 4,000 VRMS I/O Isolation Solid-State reliability UL recognized; pending for lead-free part number (PbF) ! ESD Tolerance: 4000V Human Body Model 500V Machine Model Applications ! ! ! ! ! ! Programmable Logic Controllers Computers and Peripheral Devices Audio Equipment Power Supplies and Power Distribution Control of Displays and Indicators Industrial Automation Part Identification PVG612A & PbF PVG612AS & PbF PVG612AS-T & PbF thru-hole surface-mount surface-mount, tape and reel (HEXFET is the registered trademark for International Rectifier Power MOSFETs) www.irf.com 1 Series PVG612A & PbF Electrical Specifications (-40°C ≤ TA ≤ +85°C unless otherwise specified) INPUT CHARACTERISTICS Limits Units Minimum Control Current (see figure 1) Maximum Control Current for Off-State Resistance @ TA = +25°C Control Current Range (Caution: current limit input LED, see figure 6) Maximum Reverse Voltage (1mA max.) 5.0 0.4 5.0 - 25 6.0 mA mA mA V OUTPUT CHARACTERISTICS Limits Units Operating Voltage Range Maximum Continuous Load Current @ TA = +40°C, 10mA Control (see figure 1) A Connection B Connection C Connection Maximum Pulsed Load Current @ TA =+25°C (100 ms @ 10% Duty Cycle) A Connection B Connection C Connection Typical Thermal Resistance (Rthja, Junction-to-Ambient) A Connection B Connection C Connection Maximum On-State Resistance @TA =+25°C For 1A pulsed load, 10mA Control (see figure 4) A Connection B Connection C Connection Maximum Off-State Leakage @ 60V, TA =+25°C Maximum Turn-On Time @TA =+25°C (see figures 7 & 8) For 500mA, 50VDC load, 10mA Control, 10mS pulse width Maximum Turn-Off Time @TA =+25°C (see figures 7 & 8) For 500mA, 50VDC load, 10mA Control, 10mS pulse width Typical Output Capacitance @ Vdd=50V, f=1MHz (see figure 2) 0 to ±60 V(DC or AC peak) 2.0 2.5 4.0 A (AC or DC) A (DC) A (DC) 7.5 8.5 15.5 A (AC or DC) A (DC) A (DC) 79.1 112.2 81.0 (°C/W) (°C/W) (°C/W) 100 50 35 1.0 mΩ mΩ mΩ µΑ 3.5 ms 0.5 105 ms pF GENERAL CHARACTERISTICS Limits Units 4000 1012 1.0 +260 -40 to +85 -40 to +100 VRMS Ω pF Minimum Dielectric Strength, Input-Output Minimum Insulation Resistance, Input-Output, @TA =+25°C, 50%RH, 100VDC Maximum Capacitance, Input-Output Maximum Pin Soldering Temperature (10 seconds maximum) Ambient Temperature Range: Operating Storage °C International Rectifier does not recommend the use of this product in aerospace, avionics, military or life support applications. Users of this International Rectifier product in such applications assume all risks of such use and indemnify International Rectifier against all damages resulting from such use. www.irf.com 3 Series PVG612A & PbF Connection Diagrams 55,0 .0 IL E D==10mA 10m A ILED "C " C Connection o n n e ctio n “C” 33.0 .0 Typical Capacitance (pF) Max. Load Current (A) 44.0 .0 “B” Connection "B "Co n n e ctio n 22.0 .0 "A " C Connection o n n e ctio n “A” 11.0 .0 00.0 .0 00 20 20 4400 660 0 80 80 900 850 800 750 700 650 600 550 500 450 400 350 300 250 200 150 100 50 0 1 00 100 "A" Connection 0 10 20 30 40 VDD Drain to Drain Voltage Ambient Temperature (C) Figure 1. Current Derating Curves 50 60 Figure 2. Typical Output Capacitance 100 90 6 80 4 70 2 0 -0.5 -0.4 -0.3 -0.2 -0.1 0.0 -2 0.1 -4 -6 0.2 0.3 0.4 I LED= 10mA Pulsed, 25C -8 0.5 RDDS0n (mohm) Load Current (A)( ) 8 "A" Connection 60 50 "B" Connection 40 "C" Connection 30 20 10 0 0 Voltage Drop VDD Figure 3. Typical Linearity Characteristics www.irf.com 25 50 75 100 Temperature (C) Figure 4. Typical Normalized On-Resistance 3 Series PVG612A & PbF 20 8 4 0.3 0.1 -35 -15 5 25 45 65 85 105 0 0 0.5 Ambient Temperature (oC) C limit Max. devic e and -40 deg. 1.0 12 TYPICAL 3.0 Min. devi ce 10 and +85 de g. 16 Input Current (mA) ID-OFF / ID-OFF 25oC 30 CAUTION: provide current limiting so that 25 mA maximum steadystate control current rating is not exceeded C limit 100 1.0 1.5 2.0 LED Forward Voltage Drop (Volts DC) Figure 5. Typical Normalized Off-State Leakage Figure 6. Input Characteristics (Current Controlled) 10.00 Ton Tdly Delay Tims (mS) 1.00 ILED Toff 90% 0.10 I 0.01 0 5 10 15 20 D 10% tdly ton t off ILED (mA) Figure 7. Typical Delay Times www.irf.com Figure 8. Delay Time Definitions 5 Series PVG612A & PbF Case Outlines 01-2008 01 01-2009 01 IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245 Tel: (310) 252-7105 This product has been designed and qualified for the Industrial market. Data and specifications subject to change without notice. 8/25/2006 www.irf.com 5