Bulletin I27125 rev. A 04/99 P100 SERIES PASSIVATED ASSEMBLED CIRCUIT ELEMENTS Features Glass passivated junctions for greater reliability 25A Electrically isolated base plate Available up to 1200 V RRM, V DRM High dynamic characteristics Wide choice of circuit configurations Simplified mechanical design and assembly UL E78996 approved Description The P100 series of Integrated Power Circuits consists of power thyristors and power diodes configured in a single package. With its isolating base plate, mechanical designs are greatly simplified giving advantages of cost reduction and reduced size. Applications include power supplies, control circuits and battery chargers. Major Ratings and Characteristics Parameters P100 Units 25 A @ TC 85 °C @ 50Hz 357 A @ 60Hz 375 A @ 50Hz 637 A 2s @ 60Hz 580 A 2s 6365 A2√s VRRM 400 to 1200 V VINS 2500 V - 40 to 125 °C ID IFSM 2 It I2√t TJ www.irf.com 1 P100 Series Bulletin I27125 rev. A 04/99 ELECTRICAL SPECIFICATIONS Voltage Ratings VRRM maximum repetitive VRSM maximum nonVDRM maximum peak reverse voltage repetitive peak reverse repetitive peak off-state voltage voltage V V V Type number P101, P121, P131 400 500 400 P102, P122, P132 600 700 600 P103, P123, P133 800 900 800 P104, P124, P134 1000 1100 1000 P105, P125, P135 1200 1300 1200 IRRM max. @ TJ max. mA 10 On-state Conduction Parameter P100 Units Conditions ID Maximum DC output current 25 I TSM Max. peak one-cycle 357 I FSM non-repetitive on-state 375 t = 8.3ms reapplied or forward current 300 t = 10ms 100% VRRM 315 t = 8.3ms reapplied Sinusoidal half wave, Initial TJ = TJ max. 2 I t 2 Maximum I t for fusing Maximum I2 √t for fusing @ TC = 85°C, full bridge t = 10ms A 637 No voltage t = 10ms No voltage t = 8.3ms reapplied 450 t = 10ms 100% VRRM 410 t = 8.3ms reapplied 580 I2√t A 6365 2 A s A2√s t = 0.1 to 10ms, no voltage reapplied I 2t for time tx = I 2√t . √tx V T(TO) Max. value of threshold voltage r t1 0.82 V TJ = 125°C 12 mΩ 1.35 V 200 A/µs TJ = 125°C from 0.67 VDRM Max. level value of on-state slope resistance V TM Max. peak on-state or V FM forward voltage drop di/dt Maximum non repetitive rate of rise of turned on current TJ = 125°C, Av. power = VT(TO) * IT(AV) + rt + (IT(RMS)) 2 TJ = 25°C, ITM = π x I T(AV) ITM = π x IT(AV), I g = 500mA, tr < 0.5µs, tp > 6µs IH Maximum holding current 130 mA TJ = 25°C anode supply = 6V, resistive load, gate open IL Maximum latching current 250 mA TJ = 25°C anode supply = 6V, resistive load 2 www.irf.com P100 Series Bulletin I27125 rev. A 04/99 Blocking Parameter dv/dt P100 Units Conditions Maximum critical rate of rise of 200 V/µs TJ = 125°C, exponential to 0.67 VDRM gate open 10 mA TJ = 125°C, gate open circuit 100 µA TJ = 25°C 2500 V off-state voltage IRRM Max. peak reverse and off-state IDRM leakage current at VRRM, VDRM IRRM Max peak reverse leakage current VINS RMS isolation voltage 50Hz, circuit to base, all terminal shorted, TJ = 25°C, t = 1s Triggering Parameter PGM P100 Maximum peak gate power PG(AV) Maximum average gate power IGM Maximum peak gate current - VGM Maximum peak negative 2 2 IGD W A 10 gate voltage VGT Units Conditions 8 V Maximum gate voltage required 3 to trigger 2 T J = 25°C 1 T J = 125°C Maximum gate current 90 required to trigger 60 T J = 25°C Anode Supply = 6V resistive load T J = 125°C Maximum gate voltage 0.2 V TJ = 125°C, rated VDRM applied 2 mA TJ = 125°C, rated VDRM applied P100 Units that will not trigger IGD Anode Supply = 6V resistive load T J = - 40°C mA 35 VGD T J = - 40°C Maximum gate current that will not trigger Thermal and Mechanical Specification Parameter TJ Max. operating temperature range -40 to 125 T Max. storage temperature range -40 to 125 stg Conditions °C RthJC Max. thermal resistance, 2.24 K/W DC operation per junction 0.10 K/W Mounting surface, smooth and greased 4 Nm A mounting compound is recommended and the torque should be checked after a period of 3 hours to allow for the spread of the compound 58 (2.0) g (oz) junction to case RthCS Max. thermal resistance, case to heatsink T Mounting torque, base to heatsink wt Approximate weight www.irf.com 3 P100 Series Bulletin I27125 rev. A 04/99 Circuit Type and Coding * Circuit "0" Circuit "2" Circuit "3" Terminal Positions G1 G1 Schematic diagram diagram G3 G2 AC1 AC2 AC1 AC2 AC1 AC2 G4 G2 (-) G1 (-) (+) Single Phase Hybrid Bridge CommonCathode G2 (-) (+) Single Phase Hybrid Bridge Doubler (+) Single Phase All SCR Bridge Basic series P10. P12. P13. With voltage suppression P10.K P12.K P13.K With free-wheeling diode P10.W - - P10.KW - - With both voltage suppression and free-wheeling diode * To complete code refer to voltage ratings table, i.e.: for 600V P10.W complete code is P102W 25 (0.98) MAX. 1.65 (0.06) MAX. 12.7 (0.50) 12.7 (0.50) 15.5 (0.61) 63.5 (2.50) Faston 6.35x0.8 (0.25x 0.03) 23.2 (0.91) 5.2 (0.20) 45 (1.77) 32.5 (1.28) MAX. 2.5 (0.10) MAX . 4.6 (0.18) 4.6 (0.18) Outline Table 33.8 (1.33) 48.7 (1.91) All dimensions in millimeters (inches) 4 www.irf.com P100 Series Bulletin I27125 rev. A 04/99 R 50 SA th K/ W 5 1. 2 = K/ 40 W ta el -D 3K /W 30 R Maximum Total Power Loss (W) 60 180° (Sine) 5 K/ W 20 7 K/ W P100 Series T = 125°C J 10 1 0 K/ W 0 0 5 10 15 20 Total Output Current (A) 25 0 25 50 75 100 125 Maximum Allowable Ambient Temperature (°C) Maximum Average On-state Power Loss (W) Maximum Average On-state Power Loss (W) Fig. 1 - Current Ratings Nomogram (1 Module Per Heatsink) 15 180° 120° 90° 60° 30° 10 RMS Limit Conduction angle 5 P100 Series T J = 125°C Per Junction 0 0 5 10 20 DC 180° 120° 90° 60° 30° 15 10 RMS Limit Conduct ion Period 5 P100 Series T J = 125°C Per Junction 0 15 0 Average On-state Current (A) Fig. 2 - On-state Power Loss Characteristics 10 15 20 Fig. 3 - On-state Power Loss Characteristics 1000 130 Instantaneous On-state Current (A) Maximum Allowable Case Temperature (°C) 5 Average On-state Current (A) Fully Turned.on 120 180° (Sine) 180° (Rect) 110 100 90 P100 Series Per Module 80 T J = 25 °C T J = 125 °C 100 10 P100 Series Per Junction 1 70 0 5 10 15 20 25 30 0 1 2 3 4 5 6 Total Output Current (A) Instantaneous On-state Voltage (V) Fig. 4 - Current Ratings Characteristics Fig. 5 - On-state Voltage Drop Characteristics www.irf.com 5 P100 Series 350 Peak Half Sine Wave On-state Current (A) Peak Half Sine Wave On-state Current (A) Bulletin I27125 rev. A 04/99 At Any Rated Load Condition And With Rated VRRM Applied Following Surge. Initial T J = 125°C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 300 250 200 P100 Series Per Junction 150 1 10 400 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Control Of Conduction May Not Be Maintained. Initial T J = 125°C No Voltage Reapplied Rated V RRM Reapplied 350 300 250 200 150 P100 Series Per Junction 100 0.01 100 0.1 Number Of Equal Amplitude Half Cycle Current Pulses (N) 1 Pulse Train Duration (s) Fig. 6 - Maximum Non-Repetitive Surge Current Fig. 7 - Maximum Non-Repetitive Surge Current (K/W) 10 thJC Steady State Value: RthJC = 2.24K/W Transient Thermal Impedance Z (DC Operation) 1 P100 Series Per Junction 0.1 0.01 0.0001 0.001 0.01 0.1 1 10 Square Wave Pulse Duration (s) Fig. 8 - Thermal Impedance ZthJC Characteristics Rectangular gate pulse a)Recommended load line for rated di/dt : 10V, 20 ohms, tr <= 1µs b)Recommended load line for rated di/dt : 10 V, 65 ohms, tr <= 1µs (1) PGM (2) PGM (3) PGM (4) PGM = 100 W, tp = 500 µs = 50 W, tp = 1 ms = 20 W, tp = 25 ms = 10 W, tp = 5 ms 10 (b) VGD (a) TJ = -40 °C TJ = 125 °C 1 TJ = 25 °C Instantaneous Gate Voltage (V) 100 IGD 0.1 0.001 (4) P100 Series 0.01 0.1 1 (3) (2) (1) Frequency Limited By PG(AV) 10 100 Instantaneous Gate Current (A) Fig. 9 - Gate Characteristics 6 www.irf.com P100 Series Bulletin I27125 rev. A 04/99 WORLD HEADQUARTERS: EUROPEAN HEADQUARTERS: IR CANADA: IR GERMANY: IR ITALY: IR FAR EAST: IR SOUTHEAST ASIA: IR TAIWAN: http://www.irf.com www.irf.com 233 Kansas St., El Segundo, California 90245 U.S.A. Tel: (310) 322 3331. Fax: (310) 322 3332. Hurst Green, Oxted, Surrey RH8 9BB, U.K. Tel: ++ 44 1883 732020. Fax: ++ 44 1883 733408. 15 Lincoln Court, Brampton, Markham, Ontario L6T3Z2. Tel: (905) 453 2200. Fax: (905) 475 8801. Saalburgstrasse 157, 61350 Bad Homburg. Tel: ++ 49 6172 96590. Fax: ++ 49 6172 965933. Via Liguria 49, 10071 Borgaro, Torino. Tel: ++ 39 11 4510111. Fax: ++ 39 11 4510220. K&H Bldg., 2F, 30-4 Nishi-Ikebukuro 3-Chome, Toshima-Ku, Tokyo, Japan 171. Tel: 81 3 3983 0086. 1 Kim Seng Promenade, Great World City West Tower,13-11, Singapore 237994. Tel: ++ 65 838 4630. 16 Fl. Suite D.207, Sec. 2, Tun Haw South Road, Taipei, 10673, Taiwan. Tel: 886 2 2377 9936. Fax-On-Demand: +44 1883 733420 Data and specifications subject to change without notice. 7