IRF 10TTS08

Preliminary Data Sheet I2143 11/97
SAFEIR Series
10TTS08
PHASE CONTROL SCR
VT
< 1.15V @ 6.5A
ITSM = 140A
Description/Features
The 10TTS08 SAFEIR series of silicon controlled
rectifiers are specifically designed for medium
power switching and phase control applications.
The glass passivation technology used has reliable operation up to 125° C junction temperature.
VRRM = 800V
Typical applications are in input rectification and
crow-bar (soft start) and these products are
designed to be used with International Rectifier
input diodes, switches and output rectifiers which
are available in identical package outlines.
Output Current in Typical Applications
Applications
Single-phase Bridge
Capacitive input filter TA = 55°C, TJ = 125°C,
Three-phase Bridge Units
13.5
17
A
common heatsink of 1°C/W
Major Ratings and Characteristics
Characteristics
Package Outline
10TTS08
Units
6.5
A
IT(RMS)
10
A
VRRM/VDRM
800
V
ITSM
140
A
1.15
V
150
V/µs
100
A/µs
- 40 to 125
°C
IT(AV)
Sinusoidal
waveform
VT
@ 6.5 A, TJ = 25°C
dv/dt
di/dt
TJ
range
TO-220AC
Also available in SMD-220 package (series 10TTS08S)
1
10TTS08 SAFEIR Series
Preliminary Data Sheet I2143 11/97
Voltage Ratings
VDRM , maximum
peak direct voltage
IRRM/IDRM
125°C
V
V
mA
800
800
1.0
Part Number
VRRM, maximum
peak reverse voltage
10TTS08
Absolute Maximum Ratings
Parameters
Conditions
10TTS08
Units
IT(AV) Max. Average On-state Current
6.5
A
@ TC = 112° C, 180° conduction half sine wave
IT(RMS) Max. RMS On-state Current
10
ITSM
Max. Peak One Cycle Non-Repetitive
120
A
10ms Sine pulse, rated VRRMapplied,TJ = 125°C
Surge Current
140
2
2
I t
Max. I t for fusing
I √t
Max. I √t for fusing
VTM
Max. On-state Voltage Drop
rt
On-state slope resistance
72
10ms Sine pulse, no voltage reapplied, TJ = 125°C
2
A s
100
10ms Sine pulse, rated VRRMapplied,TJ = 125°C
10ms Sine pulse, no voltage reapplied, T J = 125°C
1000
2
A √s
t = 0.1 to 10ms, no voltage reapplied,TJ = 125°C
1.15
V
@ 6.5A, TJ = 25°C
17.3
mΩ
VT(TO) Threshold Voltage
0.85
V
IRM/IDM Max.Reverse and Direct
0.05
mA
Leakage Current
1.0
IH
Typ. Holding Current
30
mA
Anode Supply = 6V, Resistive load, Initial IT =1A
IL
Max. Latching Current
50
mA
Anode Supply = 6V, Resistive load
dv/dt Max. rate of rise of off-state Voltage
150
V/µs
TJ = 25°C
di/dt
100
A/µs
2
2
2
Max. rate of rise of turned-on Current
TJ = 125°C
TJ = 25 °C
TJ = 125 °C
VR = rated VRRM/ VDRM
10TTS08 SAFEIR Series
Preliminary Data Sheet I2143 11/97
Triggering
Parameters
PGM
10TTS08
Units
8.0
W
Max. peak Gate Power
Conditions
PG(AV) Max. average Gate Power
2.0
+ IGM Max. paek positive Gate Current
1.5
- VGM Max. paek negative Gate Voltage
10
V
IGT
Max. required DC Gate Current
20
mA
to trigger
15
Anode supply = 6V, resistive load, TJ = 25°C
10
Anode supply = 6V, resistive load, TJ = 125°C
VGT
Max. required DC Gate Voltage
A
1.2
to trigger
V
Anode supply = 6V, resistive load, TJ = - 65°C
Anode supply = 6V, resistive load, TJ = - 65°C
1
Anode supply = 6V, resistive load, TJ = 25°C
0.7
Anode supply = 6V, resistive load, TJ = 125°C
VGD
Max. DC Gate Voltage not to trigger
0.2
IGD
Max. DC Gate Current not to trigger
0.1
mA
10TTS08
Units
0.8
µs
TJ = 125°C, VDRM = rated value
TJ = 125°C, VDRM = rated value
Switching
Parameters
tgt
Typical turn-on time
trr
Typical reverse recovery time
tq
Typical turn-off time
3
Conditions
TJ = 25°C
TJ = 125°C
100
Thermal-Mechanical Specifications
Parameters
10TTS08
Units
°C
TJ
Max. Junction Temperature Range
- 40 to 125
Tstg
Max. Storage Temperature Range
- 40 to 125
RthJC Max. Thermal Resistance Junction
1.5
°C/W
Conditions
DCoperation
to Case
RthJA Max. Thermal Resistance Junction
62
to Ambient
RthCS Typ. Thermal Resistance Case
to Heatsink
wt
Approximate Weight
T
Mounting Torque
Case Style
0.5
Mountingsurface,smoothandgreased
2 (0.07)
g (oz.)
Min.
6 (5)
Max.
12 (10)
Kg-cm
(Ibf-in)
TO-220AC
3
10TTS08 SAFEIR Series
10TTS08
R thJC (DC) = 1.5 K/W
120
Conduction Angle
115
30°
60°
90°
110
120°
180°
105
0
1
2
3
4
5
6
7
120
Conduction Period
115
30°
60°
110
90°
120°
180°
DC
105
0
2
4
6
8
10
12
Fig. 2 - Current Rating Characteristics
7
6
5
RMS Limit
3
Conduction Angle
2
10TTS08
T J= 125°C
1
0
1
2
3
4
5
6
7
Maximum Average On-state Power Loss (W)
Fig. 1 - Current Rating Characteristics
12
DC
180°
120°
90°
60°
30°
10
8
6
RMS Limit
4
Conduction Period
10TTS08
T J = 125°C
2
0
0
2
4
6
8
10
12
Average On-state Current (A)
Average On-state Current (A)
Fig. 3 - On-state Power Loss Characteristics
Fig. 4 - On-state Power Loss Characteristics
130
At Any Rated Load Condition And With
Rated V RRM Applied Following Surge.
120
Initial T J= 125°C
@ 60 Hz 0.0083 s
@ 50 Hz 0.0100 s
110
100
90
80
70
10TTS08
60
1
10
100
Number Of Equal Amplitude Half Cycle Current Puls es (N)
Fig. 6 - Maximum Non-Repetitive Surge Current
4
10TTS08
R thJC(DC) = 1.5 K/W
Average On-state Current (A)
180°
120°
90°
60°
30°
0
125
Average On-state Current (A)
8
4
Maximum Allowable Case Temperature (°C)
125
Peak Half Sine Wave On-state Current (A)
Peak Half Sine Wave On-state Current (A)
Maximum Average On-state Power Loss (W)
Maximum Allowable Case Temperature (°C)
Preliminary Data Sheet I2143 11/97
150
140
130
Maximum Non Repetitive Surge Current
Versus Pulse Train Duration. Control
Of Conduction May Not Be Maintained.
Initial T J= 125°C
No Voltage Reapplied
Rated V RRMReapplied
120
110
100
90
80
70
60
50
0.01
10TTS08
0.1
1
Pulse Train Duration (s)
Fig. 7 - Maximum Non-Repetitive Surge Current
10TTS08 SAFEIR Series
Preliminary Data Sheet I2143 11/97
Instantaneous On-state Current (A)
1000
10TTS08
100
T J= 25°C
10
T J= 125°C
1
0.5
1
1.5
2
2.5
3
3.5
Instantaneous On-stat e Voltage (V)
Transient Thermal Impedance Z thJC (°C/W)
Fig. 7 - On-state Voltage Drop Characteristics
10
Steady State Value
(DC Operation)
1
0.1
D
D
D
D
= 0.50
= 0.33
= 0.25
= 0.17
D = 0.08
Single Pulse
10TTS08
0.01
0.0001
0.001
0. 01
0.1
1
Square Wave Pulse Duration (s)
Fig. 8 - Thermal Impedance ZthJC Characteristics
5
10TTS08 SAFEIR Series
Preliminary Data Sheet I2143 11/97
Outline Table
10.54 (0.41)
2
1.32 (0.05)
MAX.
3.78 (0.15)
1.22 (0.05)
DIA.
3.54 (0.14)
6.48 (0.25)
6.23 (0.24)
2.92 (0.11)
15.24 (0.60)
2.54 (0.10)
TERM 2
14.84 (0.58)
2°
1 2 3
14.09 (0.55)
3.96 (0.16)
13.47 (0.53)
3.55 (0.14)
0.10 (0.004)
2.04 (0.080) MAX.
2.89 (0.11)
1.40 (0.05)
1.15 (0.04)
2.84 (0.10)
0.94 (0.04)
0.69 (0.03)
1 2 3
0.61 (0.02) MAX.
4.57 (0.18)
4.32 (0.17)
Dimensions in millimeters (and inches)
5.08 (0.20) REF.
Ordering Information Table
Device Code
10
T
T
S
08
2
(A)
1
2
3
1
-
Current Rating
2
-
Circuit Configuration:
3
-
Package:
4
-
Type of Silicon:
5
-
Voltage code: Code x 100 = VRRM
T = Single Thyristor
T = TO-220AC
S = Converter Grade
6
4
5
1 (K) (G) 3
10TTS08 SAFEIR Series
Preliminary Data Sheet I2143 11/97
WORLD HEADQUARTERS:
EUROPEAN HEADQUARTERS:
IR CANADA:
IR GERMANY:
IR ITALY:
IR FAR EAST:
IR SOUTHEAST ASIA:
http://www.irf.com
233 Kansas St., El Segundo, California 90245 U.S.A Tel: (310) 322-3331 Fax: (310) 322-3332
Hurst Green, Oxted, Surrey RH8 9BB, U.K. Tel: ++ 44 1883 732020 Fax: ++ 44 1883 733408
7231 Victoria Park Ave., Suite #201, Markham, Ontario L3R 2Z8 Tel: (905) 475 1897. Fax: (905) 475 8801
Saalburgstrasse 157, 61350 Bad Homburg Tel: ++ 49 6172 96590 Fax: ++ 49 6172 965933
Via Liguria 49, 10071 Borgaro, Torino Tel: ++ 39 11 4510111 Fax: ++ 39 11 4510220
K&H Bldg., 2F, 30-4 Nishi-Ikebukuro 3-Chome, Toshima-Ku, Tokyo, Japan 171 Tel: 81 3 3983 0086 Fax: 81 3 3983 0642
315 Outram Road, # 10-02 Tan Boon Liat Building, SINGAPORE 0316. Tel: 65 221 8371. Fax: 65 221 8372.
Fax-On-Demand: +44 1883 733420
Data and specifications subject to change without notice
11/97
7