Bulletin PD -20614 rev. A 12/00 HFA04TB60S HEXFRED Ultrafast, Soft Recovery Diode TM Features • • • • • Ultrafast Recovery Ultrasoft Recovery Very Low IRRM Very Low Qrr Specified at Operating Conditions Benefits • Reduced RFI and EMI • Reduced Power Loss in Diode and Switching Transistor • Higher Frequency Operation • Reduced Snubbing • Reduced Parts Count (K) VR = 600V BASE + 2 VF = 1.8V Qrr * = 40nC (N/C) 1 di(rec)M/dt * = 280A/µs * 125°C 3 _ (A) Description International Rectifier's HFA04TB60S is a state of the art ultra fast recovery diode. Employing the latest in epitaxial construction and advanced processing techniques it features a superb combination of characteristics which result in performance which is unsurpassed by any rectifier previously available. With basic ratings of 600 volts and 8 amps per Leg continuous current, the HFA04TB60S is especially well suited for use as the companion diode for IGBTs and MOSFETs. In addition to ultra fast recovery time, the HEXFRED product line features extremely low values of peak recovery current (IRRM) and does not exhibit any tendency to "snap-off" during the tb portion of recovery. The HEXFRED features combine to offer designers a rectifier with lower noise and significantly lower switching losses in both the diode and the switching transistor. These HEXFRED advantages can help to significantly reduce snubbing, component count and heatsink sizes. The HEXFRED HFA04TB60S is ideally suited for applications in power supplies and power conversion systems (such as inverters), motor drives, and many other similar applications where high speed, high efficiency is needed. D2 Pak Absolute Maximum Ratings Parameter VR IF @ TC = 100°C IFSM IFRM PD @ TC = 25°C PD @ TC = 100°C TJ TSTG Cathode-to-Anode Voltage Continuous Forward Current Single Pulse Forward Current Maximum Repetitive Forward Current Maximum Power Dissipation Maximum Power Dissipation Operating Junction and Storage Temperature Range Max. Units 600 4.0 25 16 25 10 V -55 to +150 °C A W 1 HFA04TB60S Bulletin PD-20614 rev. A 12/00 Electrical Characteristics @ TJ = 25°C (unless otherwise specified) Parameter Min. Typ. Max. Units VBR Cathode Anode Breakdown Voltage 600 ––– ––– 1.5 1.8 1.4 0.17 44 4.0 ––– 1.8 2.2 1.7 3.0 300 8.0 VFM Max Forward Voltage ––– IRM Max Reverse Leakage Current CT Junction Capacitance LS Series Inductance ––– 8.0 ––– V V µA pF nH Test Conditions IR = 100µA IF = 4.0A See Fig. 1 IF = 8.0A IF = 4.0A, TJ = 125°C See Fig. 2 VR = VR Rated TJ = 125°C, VR = 0.8 x VR RatedD Rated See Fig. 3 VR = 200V Measured lead to lead 5mm from package body Dynamic Recovery Characteristics @ TJ = 25°C (unless otherwise specified) Parameter trr trr1 trr2 IRRM1 IRRM2 Qrr1 Qrr2 di(rec)M/dt1 di(rec)M/dt2 Reverse Recovery Time See Fig. 5 & 6 Peak Recovery Current Reverse Recovery Charge See Fig. 7 Peak Rate of Fall of Recovery Current During tb See Fig. 8 Min. Typ. Max. Units ––– ––– ––– ––– ––– ––– ––– ––– ––– 17 28 38 2.9 3.7 40 70 280 235 ––– 42 57 5.2 6.7 60 105 ––– ––– ns A nC A/µs Test Conditions IF = 1.0A, dif/dt = 200A/µs, VR = 30V TJ = 25°C TJ = 125°C IF = 4.0A TJ = 25°C TJ = 125°C VR = 200V TJ = 25°C TJ = 125°C dif/dt = 200A/µs TJ = 25°C TJ = 125°C Thermal - Mechanical Characteristics Parameter Tlead RthJC RthJA Wt ! " Lead Temperature Thermal Resistance, Junction to Case Thermal Resistance, Junction to Ambient Weight ! 0.063 in. from Case (1.6mm) for 10 sec " Typical Socket Mount 2 Min. Typ. Max. –––– –––– –––– –––– –––– –––– –––– –––– 2.0 0.07 300 5.0 80 –––– –––– Units °C K/W g (oz) HFA04TB60S Bulletin PD-20614 rev. A 12/00 1000 Reverse Current - IR (µA) TJ = 150°C 10 TJ = 125°C T = 25°C TJ = 150°C 100 10 TJ = 125°C 1 0.1 TJ = 25°C 0.01 0.001 J 0 100 200 300 400 500 Reverse Voltage - V R (V) Fig. 2 - Typical Reverse Current vs. Reverse Voltage 1 0.1 0.0 1.0 2.0 3.0 4.0 5.0 6.0 Forward Voltage Drop - VFM (V) Fig. 1 - Maximum Forward Voltage Drop vs. Instantaneous Forward Current, Junction Capacitance -CT (pF) 100 A TJ = 25°C 10 1 1 10 100 1000 Reverse Voltage - V R (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage 10 Thermal Response (Z thJC ) Instantaneous Forward Current - IF (A) 100 D = 0.50 1 0.20 0.10 0.05 0.02 0.01 SINGLE PULSE (THERMAL RESPONSE) P DM 0.1 0.01 0.00001 t1 t2 Notes: 1. Duty factor D = t 1 / t 2 2. Peak T J = P DM x Z thJC + TC 0.0001 0.001 0.01 0.1 1 t1 , Rectangular Pulse Duration (sec) Fig. 4 - Maximum Thermal Impedance Zthjc Characteristics 3 HFA04TB60S Bulletin PD-20614 rev. A 12/00 50 14 I F = 8.0A 45 12 I F = 4.0A 10 I F = 8.0A I F = 4.0A Irr- ( A) trr- (nC) 40 VR = 200V TJ = 125°C TJ = 25°C 35 8 6 30 4 25 2 VR = 200V TJ = 125°C TJ = 25°C 20 100 di f /dt - (A/µs) 0 100 1000 di f /dt - (A/µs) 1000 Fig. 6 - Typical Recovery Current vs. dif/dt Fig. 5 - Typical Reverse Recovery vs. dif/dt 1000 200 VR = 200V TJ = 125°C TJ = 25°C VR = 200V TJ = 125°C TJ = 25°C 160 I F = 8.0A I F = 4.0A Qrr- (nC) 120 di (rec) M/dt- (A /µs) I F = 8.0A 80 I F = 4.0A 40 0 100 di f /dt - (A/µs) Fig. 7 - Typical Stored Charge vs. dif/dt 4 1000 100 100 A di f /dt - (A/µs) Fig. 8 - Typical di(rec)M/dt vs. dif/dt, 1000 HFA04TB60S Bulletin PD-20614 rev. A 12/00 3 t rr IF REVERSE RECOVERY CIRCUIT tb ta 0 Q rr VR = 200V 2 I RRM 4 0.5 I RRM di(rec)M/dt 0.01 Ω L = 70µH D.U.T. dif/dt ADJUST D G 5 0.75 I RRM IRFP250 S Fig. 9 - Reverse Recovery Parameter Test Circuit 1 di f /dt 1. dif/dt - Rate of change of current through zero crossing 2. IRRM - Peak reverse recovery current 3. trr - Reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current 4. Qrr - Area under curve defined by trr and IRRM trr X IRRM Qrr = 2 5. di(rec)M/dt - Peak rate of change of current during tb portion of trr Fig. 10 - Reverse Recovery Waveform and Definitions 5 HFA04TB60S Bulletin PD-20614 rev. A 12/00 Outline Table 4.69 (0.18) 4.20 (0.16) 10.16 (0.40) REF. 1.32 (0.05) 15.49 (0.61) 1.22 (0.05) 6.47 (0.25) 93° 6.18 (0.24) 14.73 (0.58) 5.28 (0.21) 2.61 (0.10) 4.78 (0.19) 2.32 (0.09) 0.55 (0.02) 8.89 (0.35) 3X REF. 1.40 (0.055) 1.14 (0.045) 2X 1 0.46 (0.02) 0.93 (0.37) MINIMUM RECOMMENDED FOOTPRINT 0.69 (0.27) 11.43 (0.45) 3 4.57 (0.18) 4.32 (0.17) 2 8.89 (0.35) 17.78 (0.70) 0.61 (0.02) MAX. 5.08 (0.20) REF. 3.81 (0.15) 2.08 (0.08) 2X 2.54 (0.10) 2X 2 Conforms to JEDEC Outline D PAK Dimensions in millimeters and inches Part Marking Information EXAMPLE: THIS IS AN HFA04TB60S PART NUMBER (K) INTERNATIONAL RECTIFIER LOGO HFA04TB60S 5K3A 9712 ASSEMBLY LOT CODE (N/C) 6 (A) DATE CODE (YYWW) YY = YEAR WW = WEEK HFA04TB60S Bulletin PD-20614 rev. A 12/00 Tape & Reel Information TRR 1.60 (0.063) 1.50 (0.059) 4.10 (0.161) 3.90 (0.153) 1.60 (0.063) 1.50 (0.059) DIA. 0.368 (0.0145) 0.342 (0.0135) FEED DIR ECTION 1.85 (0.073) 1.65 (0.065) 11.60 (0.457) 11.40 (0.449) 15.42 (0.609) 15.22 (0.601) TRL 1.75 (0.069) 10.90 (0.429) 10.70 (0.421) 1.25 (0.049) 24.30 (0.957) 23.90 (0.941) DIA. 16.10 (0.634) 4.72 (0.186) 4.52 (0.178) 15.90 (0.626) FEED DIRECTION 13.50 (0.532) 12.80 (0.504) DIA. 26.40 (1.039) 24.40 (0.961) SMD-220 Tape & Reel When ordering, indicate the part number, part orientation, and the quantity. Quantities are in multiples 60 (2.362) 360 (14.173) DIA. MAX. WORLD HEADQUARTERS: EUROPEAN HEADQUARTERS: IR CANADA: IR GERMANY: IR ITALY: IR FAR EAST: IR SOUTHEAST ASIA: IR TAIWAN: http://www.irf.com of 800 pieces per reel for both TRL and TRR. D IA . MIN . 233 Kansas St., El Segundo, California 90245 U.S.A. Tel: (310) 322 3331. Fax: (310) 322 3332. Hurst Green, Oxted, Surrey RH8 9BB, U.K. Tel: ++ 44 1883 732020. Fax: ++ 44 1883 733408. 15 Lincoln Court, Brampton, Markham, Ontario L6T3Z2. Tel: (905) 453 2200. Fax: (905) 475 8801. Saalburgstrasse 157, 61350 Bad Homburg. Tel: ++ 49 6172 96590. Fax: ++ 49 6172 965933. Via Liguria 49, 10071 Borgaro, Torino. Tel: ++ 39 11 4510111. Fax: ++ 39 11 4510220. K&H Bldg., 2F, 30-4 Nishi-Ikebukuro 3-Chome, Toshima-Ku, Tokyo, Japan 171. Tel: 81 3 3983 0086. 1 Kim Seng Promenade, Great World City West Tower,13-11, Singapore 237994. Tel: ++ 65 838 4630. 16 Fl. Suite D.207, Sec. 2, Tun Haw South Road, Taipei, 10673, Taiwan. Tel: 886 2 2377 9936. Fax-On-Demand: +44 1883 733420 Data and specifications subject to change without notice. 7