IRF IRFPS3815

PD - 93911
IRFPS3815
HEXFET® Power MOSFET
l
l
l
l
l
l
Advanced Process Technology
Ultra Low On-Resistance
Dynamic dv/dt Rating
175°C Operating Temperature
Fast Switching
Fully Avalanche Rated
D
VDSS = 150V
RDS(on) = 0.015Ω
G
ID = 105A
S
Description
The HEXFET® Power MOSFETs from International
Rectifier utilize advanced processing techniques to
achieve extremely low on-resistance per silicon area.
This benefit, combined with the fast switching speed
and ruggedized device design that HEXFET power
MOSFETs are well known for, provides the designer
with an extremely efficient and reliable device for use in
a wide variety of applications.
Super-247™
Absolute Maximum Ratings
Parameter
ID @ TC = 25°C
ID @ TC = 100°C
IDM
PD @TC = 25°C
VGS
EAS
IAR
EAR
dv/dt
TJ
TSTG
Continuous Drain Current, VGS @ 10V
Continuous Drain Current, VGS @ 10V
Pulsed Drain Current 
Power Dissipation
Linear Derating Factor
Gate-to-Source Voltage
Single Pulse Avalanche Energy‚
Avalanche Current
Repetitive Avalanche Energy
Peak Diode Recovery dv/dt ƒ
Operating Junction and
Storage Temperature Range
Soldering Temperature, for 10 seconds
Max.
Units
105
74
390
441
2.9
± 30
1610
58
38
3.0
-55 to + 175
A
W
W/°C
V
mJ
A
mJ
V/ns
300 (1.6mm from case )
Thermal Resistance
Parameter
RθJC
RθCS
RθJA
www.irf.com
Junction-to-Case
Case-to-Sink, Flat, Greased Surface
Junction-to-Ambient
Typ.
Max.
Units
–––
0.24
–––
0.34
–––
40
°C/W
1
3/14/01
IRFPS3815
Electrical Characteristics @ TJ = 25°C (unless otherwise specified)
RDS(on)
VGS(th)
gfs
Parameter
Drain-to-Source Breakdown Voltage
Breakdown Voltage Temp. Coefficient
Static Drain-to-Source On-Resistance
Gate Threshold Voltage
Forward Transconductance
Qg
Qgs
Qgd
td(on)
tr
td(off)
tf
Gate-to-Source Forward Leakage
Gate-to-Source Reverse Leakage
Total Gate Charge
Gate-to-Source Charge
Gate-to-Drain ("Miller") Charge
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall Time
Min.
150
–––
–––
3.0
47
–––
–––
–––
–––
–––
–––
–––
–––
–––
–––
–––
Typ.
–––
0.18
–––
–––
–––
–––
–––
–––
–––
260
53
150
22
130
51
60
IDSS
Drain-to-Source Leakage Current
LD
Internal Drain Inductance
–––
5.0
LS
Internal Source Inductance
–––
13
Ciss
Coss
Crss
Coss
Coss
Coss eff.
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
Output Capacitance
Output Capacitance
Effective Output Capacitance …
–––
–––
–––
–––
–––
–––
6810
1570
480
9820
670
1270
V(BR)DSS
∆V(BR)DSS/∆TJ
IGSS
Max. Units
Conditions
–––
V
VGS = 0V, ID = 250µA
––– V/°C Reference to 25°C, ID = 1mA
0.015
Ω
VGS = 10V, ID = 63A „
5.0
V
VDS = 10V, ID = 250µA
–––
S
VDS = 50V, ID = 58A
25
VDS = 100V, VGS = 0V
µA
250
VDS = 80V, VGS = 0V, TJ = 150°C
100
VGS = 30V
nA
-100
VGS = -30V
390
ID = 58A
80
nC
VDS = 120V
230
VGS = 10V„
–––
VDD = 75V
–––
ID = 58A
ns
–––
RG = 1.03Ω
–––
VGS = 10V „
D
Between lead,
–––
6mm (0.25in.)
nH
G
from package
–––
and center of die contact
S
–––
VGS = 0V
–––
pF
VDS = 25V
–––
ƒ = 1.0MHz, See Fig. 5
–––
VGS = 0V, VDS = 1.0V, ƒ = 1.0MHz
–––
VGS = 0V, VDS = 120V, ƒ = 1.0MHz
–––
VGS = 0V, VDS = 0V to 120V
Source-Drain Ratings and Characteristics
IS
ISM
VSD
trr
Qrr
ton
Parameter
Continuous Source Current
(Body Diode)
Pulsed Source Current
(Body Diode) 
Diode Forward Voltage
Reverse Recovery Time
Reverse RecoveryCharge
Forward Turn-On Time
Min. Typ. Max. Units
Conditions
D
MOSFET symbol
––– ––– 105
showing the
A
G
integral reverse
––– ––– 390
S
p-n junction diode.
––– ––– 1.3
V
TJ = 25°C, IS = 58A, VGS = 0V „
––– 270 410
ns
TJ = 25°C, IF = 58A
––– 2990 4490 nC di/dt = 100A/µs „
Intrinsic turn-on time is negligible (turn-on is dominated by LS+LD)
Notes:
 Repetitive rating; pulse width limited by
max. junction temperature. (See fig. 11)
‚ Starting TJ = 25°C, L = 0.96mH
R G = 25Ω, IAS = 58A. (See Figure 12)
„ Pulse width ≤ 300µs; duty cycle ≤ 2%.
… Coss eff. is a fixed capacitance that gives the same charging time
as Coss while VDS is rising from 0 to 80% VDSS
ƒ ISD ≤ 58A, di/dt ≤ 450A/µs, VDD ≤ V(BR)DSS,
TJ ≤ 175°C
2
www.irf.com
IRFPS3815
1000
1000
VGS
15V
12V
10V
8.0V
7.0V
6.0V
5.5V
BOTTOM 5.0V
I D , Drain-to-Source Current (A)
I D , Drain-to-Source Current (A)
100
100
10
5.0V
1
0.1
50µs PULSE WIDTH
TJ = 25 °C
0.01
0.1
1
10
5.0V
10
100
RDS(on) , Drain-to-Source On Resistance
(Normalized)
I D , Drain-to-Source Current (A)
3.0
TJ = 175 ° C
100
TJ = 25 ° C
10
V DS = 50V
50µs PULSE WIDTH
7
8
9
10
11
VGS , Gate-to-Source Voltage (V)
Fig 3. Typical Transfer Characteristics
www.irf.com
10
100
Fig 2. Typical Output Characteristics
1000
6
1
VDS , Drain-to-Source Voltage (V)
Fig 1. Typical Output Characteristics
1
50µs PULSE WIDTH
TJ = 175 °C
1
0.1
VDS , Drain-to-Source Voltage (V)
5
VGS
15V
12V
10V
8.0V
7.0V
6.0V
5.5V
BOTTOM 5.0V
TOP
TOP
12
ID = 97A
2.5
2.0
1.5
1.0
0.5
0.0
-60 -40 -20
VGS = 10V
0
20 40 60 80 100 120 140 160 180
TJ , Junction Temperature ( °C)
Fig 4. Normalized On-Resistance
Vs. Temperature
3
IRFPS3815
VGS = 0V,
f = 1 MHZ
Ciss = Cgs + Cgd , Cds SHORTED
Crss = Cgd
10000
C, Capacitance(pF)
Ciss
Coss = Cds + Cgd
8000
Coss
6000
4000
Crss
2000
VGS , Gate-to-Source Voltage (V)
20
12000
ID = 58A
VDS = 120V
VDS = 75V
VDS = 30V
16
12
8
4
0
FOR TEST CIRCUIT
SEE FIGURE 13
0
1
10
100
0
1000
100
200
300
400
Q G , Total Gate Charge (nC)
VDS , Drain-to-Source Voltage (V)
Fig 6. Typical Gate Charge Vs.
Gate-to-Source Voltage
Fig 5. Typical Capacitance Vs.
Drain-to-Source Voltage
10000
1000
ISD , Reverse Drain Current (A)
OPERATION IN THIS AREA LIMITED
BY RDS(on)
1000
I D , Drain Current (A)
100
TJ = 175 ° C
100
10
TJ = 25 ° C
1
0.1
0.0
100us
1ms
10
V GS = 0 V
0.4
0.8
1.2
1.6
VSD ,Source-to-Drain Voltage (V)
Fig 7. Typical Source-Drain Diode
Forward Voltage
4
10us
2.0
10ms
TC = 25 ° C
TJ = 175 ° C
Single Pulse
1
1
10
100
1000
VDS , Drain-to-Source Voltage (V)
Fig 8. Maximum Safe Operating Area
www.irf.com
IRFPS3815
120
RD
VDS
100
VGS
D.U.T.
I D , Drain Current (A)
RG
+
-VDD
80
10V
60
Pulse Width ≤ 1 µs
Duty Factor ≤ 0.1 %
40
20
VDS
90%
0
25
50
75
100
125
150
175
TC , Case Temperature ( ° C)
Fig 9. Maximum Drain Current Vs.
Case Temperature
10%
VGS
td(on)
tr
t d(off)
tf
Thermal Response (Z thJC )
1
D = 0.50
0.1
0.20
0.10
0.05
0.02
0.01
0.01
PDM
SINGLE PULSE
(THERMAL RESPONSE)
t1
t2
Notes:
1. Duty factor D = t 1 / t 2
2. Peak T J = P DM x Z thJC + TC
0.001
0.00001
0.0001
0.001
0.01
0.1
1
t1 , Rectangular Pulse Duration (sec)
Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Case
www.irf.com
5
IRFPS3815
D .U .T
RG
+
V
- DD
IA S
20V
TOP
BOTTOM
3000
A
0 .0 1 Ω
tp
EAS , Single Pulse Avalanche Energy (mJ)
D R IV E R
L
VDS
4000
1 5V
Fig 12a. Unclamped Inductive Test Circuit
ID
24A
41A
58A
2000
1000
V (B R )D SS
tp
0
25
50
75
100
125
150
175
Starting TJ , Junction Temperature ( °C)
Fig 12c. Maximum Avalanche Energy
Vs. Drain Current
IAS
Fig 12b. Unclamped Inductive Waveforms
Current Regulator
Same Type as D.U.T.
QG
10 V
50KΩ
12V
.2µF
.3µF
QGS
QGD
D.U.T.
VG
+
V
- DS
VGS
3mA
Charge
Fig 13a. Basic Gate Charge Waveform
6
IG
ID
Current Sampling Resistors
Fig 13b. Gate Charge Test Circuit
www.irf.com
IRFPS3815
Peak Diode Recovery dv/dt Test Circuit
+
D.U.T*
ƒ
Circuit Layout Considerations
• Low Stray Inductance
• Ground Plane
• Low Leakage Inductance
Current Transformer
+
‚
-
-
„
+

• dv/dt controlled by RG
• ISD controlled by Duty Factor "D"
• D.U.T. - Device Under Test
RG
VGS
*
+
-
VDD
Reverse Polarity of D.U.T for P-Channel
Driver Gate Drive
P.W.
Period
D=
P.W.
Period
[VGS=10V ] ***
D.U.T. ISD Waveform
Reverse
Recovery
Current
Body Diode Forward
Current
di/dt
D.U.T. VDS Waveform
Diode Recovery
dv/dt
Re-Applied
Voltage
Body Diode
[VDD]
Forward Drop
Inductor Curent
Ripple ≤ 5%
[ ISD ]
*** VGS = 5.0V for Logic Level and 3V Drive Devices
Fig 14. For N-channel HEXFET® power MOSFETs
www.irf.com
7
IRFPS3815
Super-247™ Package Outline
Dimensions are shown in millimeters (inches)
Data and specifications subject to change without notice.
This product has been designed and qualified for the industrial market.
Qualification Standards can be found on IR’s Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7903
Visit us at www.irf.com for sales contact information. 3/01
8
www.irf.com