TOSHIBA TLP176G

TLP176G
TOSHIBA Photocoupler
GaAs Ired & Photo−MOS FET
TLP176G
Modems In PC
Modem−Fax Cards
Telecommunications
Unit in mm
The TOSHIBA TLP176G consists of gallium arsenide infrared emitting
diode optically coupled to a photo−MOS FET in a SOP,
which is suitable for surface mount assembly.
The TLP176G is suitable for the modem applications which require
space savings.
•
Peak off−state voltage: 350V (min)
•
Trigger LED current: 3mA (max)
•
On−state resistance: 35Ω (max)
•
Isolation voltage: 1500Vrms (min)
•
UL recognized: UL1577, file No. E67349
•
BSI approved
: BS EN60065: 2002, certificate No.8753
BS EN60950-1: 2002, certificate No.8754
•
SEMKO approved: SS EN60065
SS EN60950
•
Option(V4)type
EIAJ
―
Weight: 0.1 g
Certificate No.40009351
Schematic
Pin Configuration (top view)
4
―
TOSHIBA
TUV approved: DIN EN 60747-5-2
1
JEDEC
1-Form-A
4
3
1
2
1
4
2
3
3
2
1.
2.
3.
4.
: Anode
: Cathode
: Drain
: Drain
1
2007-10-01
TLP176G
Absolute Maximum Ratings (Ta = 25°C)
Characteristic
Symbol
Rating
Unit
IF
50
mA
ΔIF / °C
−0.5
mA / °C
Pulse forward current (100μs pulse,100pps)
IFP
1
A
Reverse voltage
VR
5
V
Junction temperature
Tj
125
°C
VOFF
350
V
ION
120
mA
ΔlON / °C
−1.2
mA / °C
Tj
125
°C
PT
350
mW
ΔPT / °C
−0.35
mW / °C
Storage temperature range
Tstg
−55~125
°C
Operating temperature range
Topr
−40~85
°C
Lead soldering temperature(10 s)
Tsol
260
°C
Isolation voltage (AC,1 min., R.H.≤ 60%) (Note 1)
BVS
1500
Vrms
Forward current
LED
Forward current derating (Ta ≥ 25°C)
Detector
Off−state output terminal voltage
On−state current
On−state current derating (Ta ≥ 25°C)
Junction temperature
Total power dissipation
Total power dissupation derating(Ta ≥ 25°C)
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
(Note 1): Device considered a two−terminal device: Pin 1 and 2 shorted together and pin 3 and 4 shorted together.
Recommended Operating Conditions
Characteristic
Symbol
Min.
Typ.
Max.
Unit
Supply voltage
VDD
―
―
280
V
Forward current
IF
5
7.5
25
mA
On−state current
ION
―
―
100
mA
Operating temperature
Topr
−20
―
65
°C
Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the
device. Additionally, each item is an independent guideline respectively. In developing designs using this
product, please confirm specified characteristics shown in this document.
2
2007-10-01
TLP176G
Individual Electrical Characteristics (Ta = 25°C)
Detector
LED
Characteristic
Symbol
Test Condition
Min.
Typ.
Max.
Unit
Forward voltage
VF
IF = 10mA
1.0
1.15
1.3
V
Reverse current
IR
VR = 5V
―
―
10
μA
Capacitance
CT
V = 0,f = 1MHz
―
30
―
pF
Off−state current
IOFF
VOFF = 350V
―
―
1
μA
Capacitance
COFF
V = 0,f = 1MHz
―
40
―
pF
Min.
Typ.
Max.
Unit
ION = 120mA
―
1
3
mA
ION = 120mA,IF = 5mA
―
22
35
Ω
Min.
Typ.
Max.
Unit
―
0.8
―
pF
―
Ω
Coupled Electrical Characteristics (Ta = 25°C)
Characteristic
Symbol
Trigger LED current
IFT
On−state resistance
RON
Test Condition
Isolation Characteristics (Ta = 25°C)
Characteristic
Capacitance input to output
Isolation resistance
Symbol
CS
RS
Test Condition
VS = 0,f = 1MHz
VS = 500V,R.H ≤ 60%
AC, 1minute
Isolation voltage
BVS
5×10
10
10
14
1500
―
―
AC, 1second (in oil)
―
3000
―
DC, 1minute (in oil)
―
3000
―
Vdc
Min.
Typ.
Max.
Unit
Vrms
Switching Characteristics (Ta = 25°C)
Characteristic
Symbol
Test Condition
Turn−οn time
tON
RL = 200Ω
―
0.3
1
Turn−οff time
tOFF
VCC = 20V, IF = 5mA
―
0.1
1
3
ms
2007-10-01
TLP176G
IF – Ta
ION – Ta
100
140
(mA)
On-state current ION
Allowable forward current
IF (mA)
120
80
60
40
20
100
80
60
40
20
0
−20
0
20
40
60
100
80
0
−20
120
Ambient temperature Ta (°C)
0
20
100
<
=
100
100 μs
50
Ta = 25 °C
Ta = 25 °C
(mA)
30
1000
500
Forward current IF
Allowable pulse forward current
IFP (mA)
80
IF – V F
Pulse width
3000
60
Ambient temperature Ta (°C)
IFP – DR
5000
40
300
100
50
30
5
3
1
0.5
0.3
10
3
10
10
-3
3
10
-2
3
10
Duty cycle ratio
-1
3
10
0.1
0.6
0
0.8
DR
1.0
1.2
1.4
Forward voltage VF
ΔVF /ΔTa – IF
1.6
1.8
2.6
3.0
(V)
IFP – VFP
1000
500
Pulse forward current IFP (mA)
Forward voltage temperature
coefficient ΔVF /ΔTa (mV/°C)
−2.8
−2.4
−2.0
−1.6
−1.2
−0.8
300
100
50
30
10
Pulse width
<
=
10 μs
5
Repetitive
3
Frequency = 100 Hz
Ta = 25 °C
−0.4
0.1
0.3 0.5
1
3
5
Forward current IF
10
30
1
0.6
50
(mA)
1.0
1.4
1.8
Pulse forward voltage
4
2.2
VFP (V)
2007-10-01
TLP176G
IFT – Ta
ION – VON
150
ION = 120 mA
ION
(mA)
4
3
On-sate current
Trigger LED current IFT (mA)
5
2
1
0
−40
−20
0
20
40
60
80
Ta = 25 °C
IF = 5 mA
100
50
0
−50
−100
−150
−2.5
100
−1.5
Ambient temperature Ta (°C)
−0.5
ION = 120 mA
(nA)
Off-state current IOFF
On-state resistance RON (Ω)
(V)
VOFF = 350 V
500
30
20
10
300
100
50
30
10
5
3
0
−40
−20
0
20
40
60
80
1
−20
100
0
Ambient temperature Ta (°C)
20
40
60
VDD = 20 V
VDD = 20 V
RL = 200 Ω
IF = 5 mA
Turn - off time tOFF
(μs)
IF = 5 mA
600
400
200
0
−40
−20
100
tOFF – Ta
400
RL = 200 Ω
800
80
Ambient temperature Ta (°C)
tON – Ta
1000
(μs)
25
IOFF – Ta
1000
IF = 5 mA
Turn - on time tON
1.5
On-state voltage VON
RON – Ta
40
0.5
0
20
40
60
80
300
200
100
0
−40
100
Ambient temperature Ta (°C)
−20
0
20
40
60
80
100
Ambient temperature Ta (°C)
5
2007-10-01
TLP176G
PT – Ta
Total power dissipation
PT (mW)
400
300
200
100
0
−40
0
40
80
120
Ambient temperature Ta (°C)
6
2007-10-01
TLP176G
RESTRICTIONS ON PRODUCT USE
20070701-EN
• The information contained herein is subject to change without notice.
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.
• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his
document shall be made at the customer’s own risk.
• The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.
• The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patents or other rights of
TOSHIBA or the third parties.
• GaAs(Gallium Arsenide) is used in this product. The dust or vapor is harmful to the human body. Do not break,
cut, crush or dissolve chemically.
• Please contact your sales representative for product-by-product details in this document regarding RoHS
compatibility. Please use these products in this document in compliance with all applicable laws and regulations
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses
occurring as a result of noncompliance with applicable laws and regulations.
7
2007-10-01