Preliminary Data Sheet I2132 rev. C 10/99 SAFEIR Series 8TWS..S PHASE CONTROL SCR VT < 1.2 V @ 8A ITSM = 120A VR / VD = up to 800V Description/Features The 8TWS..S SAFEIR new series of silicon controlled rectifiers in D-Pak, are specifically designed for low power switching and phase control applications. The glass passivation technology used has reliable operation up to 125°C junction temperature. Typical applications are in input rectification (soft start), AC switches, Motor Control and Crow-Bar. These products are designed to be used with International Rectifier input diodes, switches and output rectifiers which are available in identical package outlines. Major Ratings and Characteristics Characteristics Package Outline 8TWS..S Units IT(AV) Sinusoidal waveform 8 A IRMS 12 A VRRM / VDRM ITSM VT dv/dt di/dt TJ @ 8 A, TJ = 25°C up to 800 V 120 A 1.2 V 200 V/µs 150 A/µs - 40 to 125 °C TO-252AA (D-Pak ) 1 8TWS..S SAFEIR Series Preliminary Data Sheet I2132 rev. C 10/99 Voltage Ratings VRRM / VDRM, max. repetitive peak and off-state voltage VRSM , maximum non repetitive peak reverse voltage IRRM / IDRM 125°C V V mA 8TWS04S 400 500 5 8TWS06S 600 700 8TWS08S 800 900 Part Number Absolute Maximum Ratings Parameters 8TWS..S Units 8 A IT(AV) Max. Average On-state Current IRMS Max. RMS On-state Current 12 ITSM Max. Peak One Cycle 100 Non-Repetitive Surge Current 120 2 2 I t Max. I t for fusing 45 I 2√t Max. I2 √t for fusing VTM Conditions @ TC = 95° C, 180° conduction half sine wave 10ms Sine pulse, rated VRRM applied,TJ = 125°C 10ms Sine pulse, no voltage reapplied,TJ = 125°C 2 A s 10ms Sine pulse, rated VRRM applied,T J = 125°C 700 A2√s t = 0.1 to 10ms, no voltage reapplied Max. On-state Voltage Drop 1.2 V rt On-state slope resistance 2724 mΩ VT(TO) Threshold Voltage 70 10ms Sine pulse, no voltage reapplied`TJ = 125°C 1.011 V I RM / I DM Max.Reverse and Direct 0.05 mA Leakage Current 5 Max. Holding Current 85 IH TJ = 125°C TJ = 25 °C TJ = 125 °C VR = rated VRRM / VDRM mA Anode Supply = 6V, Resistive load, Initial I T=1A Anode Supply = 6V, Resistive load IL Max. Latching Current 75 mA dv/dt Max. rate of rise of off-state Voltage 200 V/µs di/dt Max. rate of rise of turned-on Current 150 A/µs 2 @ 8A, TJ = 25°C 8TWS..S SAFEIR Series Preliminary Data Sheet I2132 rev. C 10/99 Triggering Parameters 8TWS..S Units 8.0 W Conditions PGM Max. peak Gate Power PG(AV) Max. average Gate Power 2.0 + IGM Max. paek positive Gate Current 1.5 A - VGM Max. paek negative Gate Voltage 10 V Max. required DC Gate Current 20 mA to trigger 15 Anode supply = 6V, resistive load, T J = 25°C 10 Anode supply = 6V, resistive load, TJ = 125°C IGT VGT Max. required DC Gate Voltage 1.2 V Anode supply = 6V, resistive load, T J = - 10°C Anode supply = 6V, resistive load, T J = - 10°C 1 Anode supply = 6V, resistive load, T J = 25°C 0.75 Anode supply = 6V, resistive load, TJ = 125°C to trigger VGD Max. DC Gate Voltage not to trigger 0.20 IGD Max. DC Gate Current not to trigger 0.10 mA 8TWS..S Units 0.8 µs T J = 125°C, VDRM = rated value T J = 125°C, VDRM = rated value Switching Parameters tgt Typical turn-on time trr Typical reverse recovery time tq Typical turn-off time 3 Conditions TJ = 25°C TJ = 125°C 100 Thermal-Mechanical Specifications Parameters 8TWS..S TJ Max. Junction Temperature Range - 40 to 125 Tstg Max. Storage Temperature Range RthJC Conditions Units °C - 40 to 125 Soldering Temperature 240 °C Max. Thermal Resistance Junction 2.0 °C/W 65 °C/W 1(0.03) g (oz.) for 10 seconds (1.6mm from case) DC operation to Case RthJA Max. Thermal Resistance Junction to Ambient (PCB Mount)** wt Approximate Weight T Case Style TO-252AA (D-PAK) **When mounted on 1" square (650mm2) PCB of FR-4 or G-10 material 4 oz (140µm) copper 40°C/W For recommended footprint and soldering techniques refer to application note #AN-994 3 8TWS..S SAFEIR Series Preliminary Data Sheet I2132 rev. C 10/99 Ordering Information Table Device Code 8 T W S 08 S TRL (A) 4 1 2 3 4 1 - Current Rating 2 - Circuit Configuration: 5 6 7 1 (K) T = Thyristor 3 - 4 - 3 (G) Package: W = TO-252AA (D-Pak) Type of Silicon: S = Standard Thyristors 04 = 400V 5 - Voltage code: Code x 100 = VRRM 06 = 600V 6 - SMD Package 08 = 800V 7 - Tape and Reel Option TRL = Left Reel TRR = Right Orientation Reel Outline Table 2.38 (0.09) 2.19 (0.08) 1.14 (0.04) 0.89 (0.03) 0.58 (0.02) 0.46 (0.02) 6.73 (0.26) 6.35 (0.25) 5.46 (0.21) 5.21 (0.20) 1.27 (0.05) 0.88 ( 0.03) MINIMUM RECOMMENDED FOOTPRINT 5.97 (0.24) 4 6.45 (0.24) 6.22 (0.24) 1.64 (0.02) 5.68 (0.22) 1 2 6.48 (0.26) 10.42 (0.41) 5.97 (0.23) 10.67 (0.42) 9.40 (0.37) 3 0.51 (0.02) MIN. 1.52 (0.06) 2x 2.54 (0.10) 1.15 (0.04) 0.89 (0.03) 1.14 (0.04) 2x 0.76 (0.03) 2.28 (0.09) 2x 3x 0.58 (0.02) 0.64 (0.02) 4.57 (0.18) 0.46 (0.02) 1 - Anode 2 - Cathode 3 - G ate 4 - Anode Dimensions in millimeters and (inches) 4 1.65 (0.06) 2x 2.28 ( 0.09) 2x 8TWS..S SAFEIR Series Preliminary Data Sheet I2132 rev. C 10/99 Marking Information EXAMPLE: THIS IS AN 8TWS08S 4 (A) INTERNATIONAL PART NUMBER RECTIFIER LOGO 8TWS08S 9512 9G3A ASSEMBLY DATE CODE (YYWW) LOT CODE 1 (K) 3 (G) YY = YEAR WW = WEEK Tape & Reel Information TR 4.1 (0.16) 3.9 (0.15) 1.85 (0.07) DIA. 1.65 (0.06) 2.1 (0.83) 1.9 (0.07) 1.85 (0.07) 1.65 (0.06) 0.35 (0.01) 0.25 (0.01) 7.6 (0.30) 7.4 (0.29) FEED DIRECTION 12.1 (0.48) 11.9 (0.47) 4.1 (0.16) 3.9 (0.15) TRR 2.1 (0.83) 1.9 (0.07) 2.6 (0.10) DIA. 1.5 (0.06) 1.85 (0.07) DIA. 1.65 (0.06) 1.85 (0.07) 1.65 (0.06) 7.6 (0.30) 7.4 (0.29) FEED DIRECTION 8.1 (0.32) 7.9 (0.31) 4.1 (0.16) 3.9 (0.15) TRL 2.1 (0.83) 1.9 (0.07) 2.6 (0.10) DIA. 1.5 (0.06) 1.85 (0.07) DIA. 1.65 (0.06) 1.85 (0.07) 1.65 (0.06) 7.6 (0.30) 7.4 (0.29) FEED DIRECTION 13 (0.52) DIA. 8.1 (0.32) 7.9 (0.31) 2.6 (0.10) DIA. 1.5 (0.06) 7.0 (0.28) 6.8 (0.26) 16.3 (0.64) 15.7 (0.62) 2.75 (0.11) 2.55 (0.10) 0.35 (0.01) 0.25 (0.01) 10.6 (0.42) 10.4 (0.41) 16.3 (0.64) 15.7 (0.62) 2.75 (0.11) 2.55 (0.10) 0.35 (0.01) 0.25 (0.01) 10.6 (0.42) 10.4 (0.41) 16.3 (0.64) 15.7 (0.62) 2.75 (0.11) 2.55 (0.10) 22.4 (0.88) TO-252AA Tape & Reel 375 (14.17) DIA. MAX. 50 (1.97) DIA. When ordering, indicate the part number, part orientation, and the quantity. Quantities are in multiples of 2,000 pieces per reel for TR and multiples of 3,000 pieces per reel for both TRL and TRR. 5 8TWS..S SAFEIR Series Preliminary Data Sheet I2132 rev. C 10/99 WORLD HEADQUARTERS: EUROPEAN HEADQUARTERS: IR CANADA: IR GERMANY: IR ITALY: IR FAR EAST: IR SOUTHEAST ASIA: IR TAIWAN: http://www.irf.com 6 233 Kansas St., El Segundo, California 90245 U.S.A. Tel: (310) 322 3331. Fax: (310) 322 3332. Hurst Green, Oxted, Surrey RH8 9BB, U.K. Tel: ++ 44 1883 732020. Fax: ++ 44 1883 733408. 15 Lincoln Court, Brampton, Markham, Ontario L6T3Z2. Tel: (905) 453 2200. Fax: (905) 475 8801. Saalburgstrasse 157, 61350 Bad Homburg. Tel: ++ 49 6172 96590. Fax: ++ 49 6172 965933. Via Liguria 49, 10071 Borgaro, Torino. Tel: ++ 39 11 4510111. Fax: ++ 39 11 4510220. K&H Bldg., 2F, 30-4 Nishi-Ikebukuro 3-Chome, Toshima-Ku, Tokyo, Japan 171. Tel: 81 3 3983 0086. 1 Kim Seng Promenade, Great World City West Tower,13-11, Singapore 237994. Tel: ++ 65 838 4630. 16 Fl. Suite D.207, Sec. 2, Tun Haw South Road, Taipei, 10673, Taiwan. Tel: 886 2 2377 9936. Fax-On-Demand: +44 1883 733420 Data and specifications subject to change without notice.