Preliminary Data Sheet I2145 12/97 SAFEIR Series 10TTS08S SURFACE MOUNTABLE PHASE CONTROL SCR VT < 1.15V @ 6.5A ITSM = 140A Description/Features The 10TTS08S SAFE IR series of silicon controlled rectifiers are specifically designed for medium power switching and phase control applications. The glass passivation technology used has reliable operation up to 125° C junction temperature. VRRM = 800V Typical applications are in input rectification (soft start) and these products are designed to be used with International Rectifier input diodes, switches and output rectifiers which are available in identical package outlines. Output Current in Typical Applications Applications Single-phase Bridge Three-phase Bridge Units NEMA FR-4 or G10 glass fabric-based epoxy with 4 oz (140µm) copper 2.5 3.5 Aluminum IMS, RthCA = 15°C/W 6.3 9.5 14.0 18.5 Aluminum IMS with heatsink, RthCA = 5°C/W TA = 55°C, TJ = 125°C, footprint 300mm2 Major Ratings and Characteristics Characteristics IT(AV) A Sinusoidal Package Outline 10TTS08S Units 6.5 A IRMS 10 A VRRM/ VDRM 800 V ITSM 140 A waveform 1.15 V dv/dt VT 150 V/µs di/dt 100 A/µs - 40 to 125 °C TJ @ 6.5 A, TJ = 25°C range D2 PAK (SMD-220) 1 10TTS08S SAFEIR Series Preliminary Data Sheet I2145 12/97 Voltage Ratings VDRM , maximum peak direct voltage IRRM/IDRM 125°C V V mA 800 800 1.0 Part Number VRRM, maximum peak reverse voltage 10TTS08S Absolute Maximum Ratings Parameters 6.5 IT(RMS) Max. RMS On-state Current 10 ITSM Max. Peak One Cycle Non-Repetitive 120 Surge Current 140 2 2 I t Max. I t for fusing I √t Max. I √t for fusing VTM Max. On-state Voltage Drop rt On-state slope resistance Conditions 10TTS08S Units IT(AV) Max. Average On-state Current 72 A @ TC = 112° C, 180° conduction half sine wave A 10ms Sine pulse, rated VRRMapplied,TJ = 125°C 10ms Sine pulse, no voltage reapplied, TJ = 125°C 2 A s 100 10ms Sine pulse, rated VRRMapplied,TJ = 125°C 10ms Sine pulse, no voltage reapplied, T J = 125°C 1000 2 A √s t = 0.1 to 10ms, no voltage reapplied,TJ = 125°C 1.15 V @ 6.5A, TJ = 25°C 17.3 mΩ VT(TO) Threshold Voltage 0.85 V IRM/IDM Max.Reverse and Direct 0.05 mA Leakage Current 1.0 IH Typ. Holding Current 30 mA Anode Supply = 6V, Resistive load, Initial IT =1A IL Max. Latching Current 50 mA Anode Supply = 6V, Resistive load dv/dt Max. rate of rise of off-state Voltage 150 V/µs TJ = 25°C di/dt 100 A/µs 2 2 2 Max. rate of rise of turned-on Current TJ = 125°C TJ = 25 °C TJ = 125 °C VR = rated VRRM/ VDRM 10TTS08S SAFEIR Series Preliminary Data Sheet I2145 12/97 Triggering Parameters PGM Max. peak Gate Power Conditions 10TTS08S Units 8.0 W PG(AV) Max. average Gate Power 2.0 + IGM Max. paek positive Gate Current 1.5 - VGM Max. paek negative Gate Voltage 10 V IGT Max. required DC Gate Current 20 mA to trigger 15 Anode supply = 6V, resistive load, TJ = 25°C 10 Anode supply = 6V, resistive load, TJ = 125°C VGT Max. required DC Gate Voltage to trigger 1.2 A V Anode supply = 6V, resistive load, TJ = - 65°C Anode supply = 6V, resistive load, TJ = - 65°C 1 Anode supply = 6V, resistive load, TJ = 25°C 0.7 Anode supply = 6V, resistive load, TJ = 125°C VGD Max. DC Gate Voltage not to trigger 0.2 IGD Max. DC Gate Current not to trigger 0.1 mA 10TTS08S Units 0.8 µs TJ = 125°C, VDRM = rated value TJ = 125°C, VDRM = rated value Switching Parameters tgt Typical turn-on time trr Typical reverse recovery time tq Typical turn-off time 3 Conditions TJ = 25°C TJ = 125°C 100 Thermal-Mechanical Specifications Parameters 10TTS08S Units TJ Max. Junction Temperature Range - 40 to 125 °C Tstg Max. Storage Temperature Range - 40 to 125 °C Soldering Temperature RthJC Max. Thermal Resistance Junction to Case RthJA Typ. Thermal Resistance Junction 240 °C 1.5 °C/W 40 °C/W 2 (0.07) g (oz.) Conditions for 10 seconds (1.6mm from case) DCoperation to Ambient (PCB Mount)** wt Approximate Weight T Case Style D2 Pak (SMD-220) **When mounted on 1" square (650mm2) PCB of FR-4 or G-10 material 4 oz (140µm) copper 40°C/W For recommended footprint and soldering techniques refer to application note #AN-994 3 10TTS08S SAFEIR Series 10TTS08 R thJC (DC) = 1.5 K/W 120 Conduction Angle 115 30° 60° 90° 110 120° 180° 105 0 1 2 3 4 5 6 7 120 Conduction Period 115 30° 60° 110 90° 120° 180° DC 105 0 2 4 6 8 10 12 Fig. 2 - Current Rating Characteristics 7 6 5 RMS Limit 3 Conduction Angle 2 10TTS08 T J= 125°C 1 0 1 2 3 4 5 6 7 Maximum Average On-state Power Loss (W) Fig. 1 - Current Rating Characteristics 12 DC 180° 120° 90° 60° 30° 10 8 6 RMS Limit 4 Conduction Period 10TTS08 T J = 125°C 2 0 0 2 4 6 8 10 12 Average On-state Current (A) Average On-state Current (A) Fig. 3 - On-state Power Loss Characteristics Fig. 4 - On-state Power Loss Characteristics 130 At Any Rated Load Condition And With Rated V RRM Applied Following Surge. 120 Initial T J= 125°C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 110 100 90 80 70 10TTS08 60 1 10 100 Number Of Equal Amplitude Half Cycle Current Puls es (N) Fig. 6 - Maximum Non-Repetitive Surge Current 4 10TTS08 R thJC(DC) = 1.5 K/W Average On-state Current (A) 180° 120° 90° 60° 30° 0 125 Average On-state Current (A) 8 4 Maximum Allowable Case Temperature (°C) 125 Peak Half Sine Wave On-state Current (A) Peak Half Sine Wave On-state Current (A) Maximum Average On-state Power Loss (W) Maximum Allowable Case Temperature (°C) Preliminary Data Sheet I2145 12/97 150 140 130 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Control Of Conduction May Not Be Maintained. Initial T J= 125°C No Voltage Reapplied Rated V RRMReapplied 120 110 100 90 80 70 60 50 0.01 10TTS08 0.1 1 Pulse Train Duration (s) Fig. 7 - Maximum Non-Repetitive Surge Current 10TTS08S SAFEIR Series Preliminary Data Sheet I2145 12/97 Instantaneous On-state Current (A) 1000 10TTS08 100 T J= 25°C 10 T J= 125°C 1 0.5 1 1.5 2 2.5 3 3.5 Instantaneous On-stat e Voltage (V) Transient Thermal Impedance Z thJC (°C/W) Fig. 7 - On-state Voltage Drop Characteristics 10 Steady State Value (DC Operation) 1 0.1 D D D D = 0.50 = 0.33 = 0.25 = 0.17 D = 0.08 Single Pulse 10TTS08 0.01 0.0001 0.001 0. 01 0.1 1 Square Wave Pulse Duration (s) Fig. 8 - Thermal Impedance ZthJC Characteristics 5 10TTS08S SAFEIR Series Preliminary Data Sheet I2145 12/97 Marking Information EXAMPLE: THIS IS AN 10TTS08S (A) INTERNATIONAL PART NUMBER RECTIFIER LOGO 10TTS08S 9G3A 9512 ASSEMBLY DATE CODE (YYWW) LOT CODE (K) (G) YY = YEAR WW = WEEK Tape & Reel Information TRR 1.60 (0.063) 1.50 (0.059) 4.10 (0.161) 3.90 (0.153) FEED DIRECTION 1.85 (0.073) 1.60 (0.063) 1.50 (0.059) DIA. 0.368 (0.0145) 0.342 (0.0135) 11.60 (0.457) 11.40 (0.449) 1.65 (0.065) 15.42 (0.609) 15.22 (0.601) TRL 10.90 (0.429) 10.70 (0.421) 1.75 (0.069) DIA. 1.25 (0.049) 16.10 (0.634) 24.30 (0.957) 23.90 (0.941) 4.72 (0.186) 4.52 (0.178) 15.90 (0.626) FEED DIRECTION Dimensions in millimeters and inches 13.50 (0.532) 12.80 (0.504) DIA. 26.40 (1.039) 24.40 (0.961) SMD-220 Tape & Reel 360 (14.173) DIA. MAX. 6 60 (2.362) DIA. MIN. When orderi ng, indicate the part number, part orientation, and the quantity. Quantities are in multiples of 800 pieces per reel for both TRL and T RR. 10TTS08S SAFEIR Series Preliminary Data Sheet I2145 12/97 Outline Table 4.69 (0.18) 4.20 (0.16) 10.16 (0.40) REF. 1.32 (0.05) 1.22 (0.05) 6.47 (0.25) 93° 15.49 (0.61) 6.18 (0.24) 14.73 (0.58) 5.28 (0.21) 2.61 (0.10) 4.78 (0.19) 2.32 (0.09) 0.55 (0.02) 8.89 (0.35) 3X REF. 1.40 (0.055) 1.14 (0.045) 2X (K) (G) 1 3 0.46 (0.02) 0.93 (0.37) MINIMUM RECOMMENDED F OOTPRINT 0.69 (0.27) 1 (K) Cathode 11.43 (0.45) 4.57 (0.18) 8.89 (0.3 5) 4.32 (0.17) 2 (A) Anode 3 (G) Gate 17.78 (0.70) 2 0.61 (0.02) MAX. (A) 5.08 (0 .20) REF. 3.81 (0.15) 2.08 (0.08) 2X Dimensions in millimeters and inches 2.54 (0 .10) 2X Ordering Information Table Device Code 10 T T S 08 S TRL 1 2 3 4 5 6 7 1 - Current Rating, RMS value 2 - Circuit Configuration T = Single Thyristor 3 - Package 4 - Type of Silicon 5 - Voltage code: Code x 100 = VRRM 6 - S = TO-220 D2Pak (SMD 220) Version 7 - Tape and Reel Option 2 (A) 1 (K) (G) 3 T = TO-220AC S = Converter Grade TRL = Left Reel TRR = Right Orientation Reel 7 10TTS08S SAFEIR Series Preliminary Data Sheet I2145 12/97 WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245 U.S.A Tel: (310) 322-3331 Fax: (310) 322-3332 EUROPEAN HEADQUARTERS: Hurst Green, Oxted, Surrey RH8 9BB, U.K. Tel: ++ 44 1883 732020 Fax: ++ 44 1883 733408 IR CANADA: 7231 Victoria Park Ave., Suite #201, Markham, Ontario L3R 2Z8 Tel: (905) 475 1897. Fax: (905) 475 8801 IR GERMANY: Saalburgstrasse 157, 61350 Bad Homburg Tel: ++ 49 6172 96590 Fax: ++ 49 6172 965933 IR ITALY: Via Liguria 49, 10071 Borgaro, Torino Tel: ++ 39 11 4510111 Fax: ++ 39 11 4510220 IR FAR EAST: K&H Bldg., 2F, 30-4 Nishi-Ikebukuro 3-Chome, Toshima-Ku, Tokyo, Japan 171 Tel: 81 3 3983 0086 Fax: 81 3 3983 0642 IR SOUTHEAST ASIA: 315 Outram Road, # 10-02 Tan Boon Liat Building, SINGAPORE 0316. Tel: 65 221 8371. Fax: 65 221 8372. http://www.irf.com 8 Fax-On-Demand: +44 1883 733420 Data and specifications subject to change without notice 12/97