Silicon Piezoresistive Absolute Pressure Sensor KPY 42-A KPY 46-A Features • • • • Low pressure and temperature hysteresis Fast response High sensitivity and linearity Fatigue free monocrystaline silicon diaphragm giving high load cycle stability • High long term stability • Pressure coupled to rearside of silicon diaphragm • Built in silicon temperature sensor TO-8-3 Type and Marking Symbol Pressure Range Unit Ordering Code KPY 42 A P0 … PN bar KPY 43 A 0 … 0.6 0 … 1.6 Q62705-K204 Q62705-K162 KPY 44 A KPY 45 A KPY 46 A 0…4 0 … 10 0 … 25 Q62705-K164 Q62705-K166 Q62705-K168 Pin Configuration 1 2 3 4 5 Capillary tube + VIN − VOUT Temperature sensor (typ. R25 = 2 kΩ) Temperature sensor 6 7 8 − VIN + VOUT Not connected Semiconductor Group 1 02.97 KPY 42-A KPY 46-A Absolute Maximum Ratings Parameter Pressure overload Symbol Limit Values Unit bar 6 10 16 30 40 PMAX KPY 42 A KPY 43 A KPY 44 A KPY 45 A KPY 46 A − 40 … + 125 ˚C TA Tstg VIN Operating temperature range Storage temperature range Supply voltage − 50 … + 150 ˚C 12 V Electrical Characteristics at TA = 25 ˚C and VIN = 5 V, unless otherwise specified. Parameter Symbol RB s Bridge resistance Sensitivity KPY 42 A KPY 43 A KPY 44 A KPY 45 A KPY 46 A KPY 42 A KPY 43 A KPY 44 A KPY 45 A KPY 46 A Offset voltage P = P0 Linearity error (Best fit straight line) typ. − max. 8 11.0 5.6 4.0 1.8 15.0 8.8 6.0 2.6 24.0 12.5 9.0 4.0 V0 45 70 120 130 150 mV − 25 − + 25 % Vfin − 2 kΩ mV/ Vbar 72 100 180 200 250 FL KPY 42 … 46 A KPY 46 A Unit mV 33 45 80 90 110 Pressure hysteresis PH P1 = P0, P2 = PN, P3 = P0 KPY 42 … 46 A Semiconductor Group min. 4 Vfin Output voltage P0 = P0 … PN Limit Values − ± 0.15 ± 0.35 ± 0.15 − ± 0.1 − % Vfin KPY 42-A KPY 46-A Electrical Characteristics at T1 = 25 ˚C, T2 = 125 ˚C, T3 = 25 ˚C and VIN = 5 V, unless otherwise specified. Parameter Symbol Temperature coefficient of Vfin KPY 42 A KPY 43 A KPY 44 A KPY 45 A KPY 46 A Temperature coefficient of V0 TCVfin KPY 42 A KPY 43 A KPY 44 A KPY 45 A KPY 46 A Temperature coefficient of RB Unit %/K − 0.19 − 0.19 − 0.19 − 0.19 − 0.19 − 0.15 − 0.16 − 0.17 − 0.17 − 0.17 − 0.12 − 0.13 − 0.14 − 0.14 − 0.15 TCV0 %/K − 0.05 − 0.03 − 0.03 − 0.03 − 0.03 − − − − − + 0.05 + 0.03 + 0.03 + 0.03 + 0.03 TCRB %/K KPY 42 … 46 A Temperature coefficient of V0; Vfin Limit Values min. typ. max. − + 0.095 − % v. Vfin TH − 0.5 − 0.3 KPY 42 A KPY 43 … 46 A − − + 0.5 + 0.3 Package Outline TO-8-3 Dimensions in mm Weight approx. 3.2 g Exterior Packaging I.e. tubes, trays, boxes are shown in our Data Book “Package Information”. Semiconductor Group 3