Final Product/Process Change Notification Document # : FPCN20626XCD Issue Date: 9 June 2015 Title of Change: Final PCN for wire change from gold to copper and part number change. Proposed first ship date: 16 September 2015 Contact information: Contact your local ON Semiconductor Sales Office or < Yasuhiro Igarashi @onsemi.com> Samples: Contact your local ON Semiconductor Sales Office Additional Reliability Data: Contact your local ON Semiconductor Sales Office or < [email protected]>. Type of notification: This is a Final Product/Process Change Notification (FPCN) sent to customers. FPCNs are issued 90 days prior to implementation of the change. ON Semiconductor will consider this change approved unless specific conditions of acceptance are provided in writing within 30 days of receipt of this notice. To do so, contact <[email protected]>. Change Part Identification: Affected products will be identified with new part number (changing suffix to “-W”). PART_ID New Part_ID CPH3455-TL-H CPH3455-TL-W MCH6444-TL-H MCH6444-TL-W Change category(s): Wafer Fab Change Assembly Change Test Change Sites Affected: All site(s) not applicable ON Semiconductor site(s) : External Foundry/Subcon site(s): Product specific change Datasheet/Product Doc change Shipping/Packaging/Marking Other: _______________________ Manufacturing Site Change/Addition Manufacturing Process Change Material Change Site 1 Site 2 ON Shenzhen, China Description and Purpose: This is a Final Process Change Notification to announce the content below: 1) Changing wire material from gold to copper 2) Changing part number XXXXXXX-TL-H from XXXXXXX-TL-E Reliability Data Summary: Test Conditions Results Steady State Operating Life Tj=150degC 1000 hrs Pass High Temperature Reverse Bias Ta=150degC,VR=max 1000 hrs Pass Temp Humidity Storage Ta=85degC, RH=85% 1000 hrs Pass Temperature Cycle Ta=-55degC to 150degC 30min each 100 cycles Pass Pressure Cooker Ta=121degC,2.03×105Pa,100% 50 hrs Pass High Temperature Storage Ta=150degC 1000 hrs Pass Resistance to Soldering heat(Reflow) Solder Temp.:260degC±5degC 10s Pass Solderability Solder Temp.:260degC±5degC 5s Pass Electrical Characteristic Summary: Electrical characteristics are not impacted. List of Affected Standard Parts: CPH3455-TL-H MCH6444-TL-H TEM001092 Rev. D Page 1 of 1