00_Intro+Cool_Fin:00_Intro+Cool_finale 07.08.2007 14:32 Uhr Seite 21 D ATA C E N T R E C O M P E T E N C E PowerTrans ® New: Power Distribution Rack Central connection unit for power supplies in individual server racks 0.16 to 0.17 1 0.15 00_Intro+Cool_Fin:00_Intro+Cool_finale 07.08.2007 14:33 Uhr Seite 22 D ATA C E N T R E C O M P E T E N C E New: Power Distribution Rack ® PowerTrans ® The new PowerTrans® rack is the interface between the low voltage feed and the “Power Distribution Unit of the Unit (PDU)“ of DI-STRIP® family, as well as other components for supplying servers and other IT devices. The power distribution is performed in the individual plug-in units and therefore no longer has to be installed fixed in the building. Up to 8 plug-in units can be integrated. Each plugin unit is supplied with an A and B feed (redundancy). With max. 250 A/phase loads of up to 329 kVA can be supplied from just one single rack. PowerTrans® Strong points 1 0.16 1 MIR20388 2 MIR20390 Equipping and installation The outputs on the plug-in units can be flexibly configured according to customer requirements via various plug connections, type CEE and GST 18. (E.g. BladePower® or PizzaPower®, DI-STRIP® TriplePower®, and flexible distribution with the GST18i5 distributor block, 3-phase). 2 Two 3-phase feeds - Feed A and feed B, both threephase with 250A/phase L1, L2, L3, N,PE each - Ideal for providing feed redundancies 3 MIR20391 3 Cable management Convenient cable routing from above and below. 4 Costs-conscious Only the main feed on the rack must be installed by an electrician. The individual plug-in units and the PDUs can be connected per Plug & Play installation, thereby allowing later extensions to be performed cost-effectively. 4 MIR20386 00_Intro+Cool_Fin:00_Intro+Cool_finale 07.08.2007 14:33 Uhr Seite 23 D ATA C E N T R E C O M P E T E N C E PowerTrans® 19” Power Distribution Rack 1 plinth for cable entry on the side and rear with levelling feet (0-25 mm) 2 plinth trims for front and rear, with vent slots and fixing for filter mat 2 plinth trims, closed 1 set of busbars, safe from contact for A-feed and B-feed 2 circuit breakers with max. 250 A 16 power supply plugs for the plug-in units wired on the busbars 5 multifunctional braces with jumper bracket 2 19” T-slot extrusions 16 chassis runners (for plug-in units) 1 complete earthing set 1 complete locking set - Feed of 2 separate 3-phase 400V mains, L1, L2, L3, N, PE - Each with a 250A circuit breaker in the input - Distribution to the individual plugs via busbars and contact-safe plug-in connections - Up to 8 plug-in units with A-feed and B-feed possible Material / Finish - Basic rack, extruded aluminium, polished - Corner piece, die-cast aluminium, polished - Glass infill front door, single safety glass panel, 4mm - Covers, zinc-plated sheet steel, powder-coated texture How supplied Assembled Colour RAL 7021 dark-grey Supply schedule 1 rack with covers and front door MIR20377 B H 800 2120 1000 D HU h d kg Model Order no. UP 03.014.501.8 1 unit PowerTrans® 19” Plug-In - 19” plug-in housing - Width: 19“ - Height: 3 HU - Depth: 480 mm - Colour: RAL7021 dark-grey - 2 separate 3-phase inputs with max. 63A phase current - Outputs acc. to variants1 – 4 Variant 1 plug-in - 2 protected 3-phase outputs, 230V/400V 32A via IEC60309 socket, 3Ph/N/PE 6h, red - Suitable for connecting 2 PizzaPower 3-phase (03.631.021.1) or 2 BladePower 3-phase (03.630.015.1) MIR20383 Variant 2 plug-in - 4 protected 1-phase outputs, 230V 32A via IEC60309 socket, 1Ph/N/PE 6h, blue - Suitable for connecting 4 PizzaPower 1-phase (03.631.007.1) or 4 BladePower 1-phase (03.630.005.1) B MIR20382 H Variant 3 plug-in - 6 protected 3-phase outputs, 230V/400V 16A via GST18i5 Euro installed socket, 3 Ph - Suitable for connecting GST18i5 distributor block, 3-phase (04.000.038.9, for flexible distribution to 1-phase socket strips) as well as connecting a TriplePower 3-phase (03.600.024.1or 03.600.048.1) Variant 4 plug-in - Empty housing - For customer-specific equipping How supplied Assembled D HU Model Order no. UP 19” 479 3 Variant 1 03.014.003.8 1 unit 19” 479 3 Variant 2 03.014.002.8 1 unit 19” 479 3 Variant 3 03.014.001.8 1 unit 19” 479 3 Variant 4 03.014.000.8 1 unit 0.17