BCR114... NPN Silicon Digital Transistor • Switching circuit, inverter, interface circuit, driver circuit • Built in bias resistor (R1 =4.7kΩ, R2 =10kΩ) • Pb-free (RoHS compliant) package1) • Qualified according AEC Q101 BCR114F C 3 R1 R2 1 2 B E EHA07184 Type Marking BCR114F U4s Pin Configuration 1=B 2=E 3=C - - Package - TSFP-3 Maximum Ratings Parameter Symbol Value Unit Collector-emitter voltage VCEO 50 Collector-base voltage VCBO 50 Input forward voltage Vi(fwd) 30 Input reverse voltage Vi(rev) 5 Collector current IC 100 mA Total power dissipation- Ptot 250 mW Junction temperature Tj 150 °C Storage temperature Tstg Thermal Resistance Parameter Junction - soldering point2) , BCR114F Symbol RthJS V BCR114F, TS ≤ 128°C -65 ... 150 Value ≤ 90 Unit K/W 1Pb-containing 2For package may be available upon special request calculation of RthJA please refer to Application Note Thermal Resistance 1 2007-09-17 BCR114... Electrical Characteristics at TA = 25°C, unless otherwise specified Parameter Symbol Values min. typ. max. DC Characteristics Collector-emitter breakdown voltage V(BR)CEO 50 Unit V IC = 100 µA, IB = 0 Collector-base breakdown voltage V(BR)CBO 50 - - ICBO - - 100 nA IEBO - - 520 µA hFE 30 - - - - - 0.3 V Vi(off) 0.5 - 1.1 Vi(on) 0.5 - 1.4 Input resistor R1 3.2 4.7 6.2 Resistor ratio R1/R2 0.42 0.47 0.52 fT - 160 - MHz Ccb - 3 - pF IC = 10 µA, IE = 0 Collector-base cutoff current VCB = 40 V, IE = 0 Emitter-base cutoff current VEB = 5 V, IC = 0 DC current gain1) IC = 5 mA, VCE = 5 V Collector-emitter saturation voltage1) VCEsat IC = 10 mA, IB = 0.5 mA Input off voltage IC = 100 µA, VCE = 5 V Input on voltage IC = 2 mA, VCE = 0.3 V kΩ - AC Characteristics Transition frequency IC = 10 mA, VCE = 5 V, f = 100 MHz Collector-base capacitance VCB = 10 V, f = 1 MHz 1Pulse test: t < 300µs; D < 2% 2 2007-09-17 BCR114... DC current gain hFE = ƒ(IC) VCE = 5 V (common emitter configuration) Collector-emitter saturation voltage VCEsat = ƒ(IC ), hFE = 20 10 -1 10 3 10 2 IC hFE A 10 -2 10 1 10 0 -4 10 10 -3 10 -2 A 10 10 -3 0 -1 0.1 0.2 V 0.3 IC 0.5 VCEsat Input on Voltage Vi (on) = ƒ(IC) VCE = 0.3V (common emitter configuration) Input off voltage Vi(off) = ƒ(IC) VCE = 5V (common emitter configuration) 10 -2 10 -1 A A 10 -3 IC IC 10 -2 10 -4 10 -3 10 -5 10 -4 -1 10 10 0 10 1 V 10 10 -6 0 2 Vi(on) 0.5 1 V 2 Vi(off) 3 2007-09-17 BCR114... Total power dissipation P tot = ƒ(TS) Permissible Puls Load RthJS = ƒ (t p) BCR114F BCR114F 10 2 300 mW K/W 250 RthJS Ptot 225 200 D=0.5 0.2 0.1 0.05 0.02 0.01 0.005 0 10 1 175 150 125 10 0 100 75 50 25 0 0 15 30 45 60 90 105 120 °C 75 10 -1 -6 10 150 TS 10 -5 10 -4 10 -3 10 -2 s 10 0 tp Permissible Pulse Load Ptotmax/PtotDC = ƒ(tp ) BCR114F Ptotmax/PtotDC 10 3 10 2 D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 1 10 0 -6 10 10 -5 10 -4 10 -3 10 -2 s 10 0 tp 4 2007-09-17 Package TSFP-3 BCR114... Package Outline 0.2 ±0.05 0.55 ±0.04 1 1.2 ±0.05 0.2 ±0.05 3 2 0.2 ±0.05 10˚ MAX. 0.8 ±0.05 1.2 ±0.05 0.15 ±0.05 0.4 ±0.05 0.4 ±0.05 Foot Print 1.05 0.45 0.4 0.4 0.4 Marking Layout (Example) Manufacturer BCR847BF Type code Pin 1 Standard Packing Reel ø180 mm = 3.000 Pieces/Reel Reel ø330 mm = 10.000 Pieces/Reel 4 0.2 1.2 1.5 8 0.3 Pin 1 0.7 1.35 5 2007-09-17 BCR114... Edition 2006-02-01 Published by Infineon Technologies AG 81726 München, Germany © Infineon Technologies AG 2007. All Rights Reserved. Attention please! The information given in this dokument shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. 6 2007-09-17