Product Overview MC100EPT26: Translator, 1:2 Fanout Differential LVPECL / LVDS to LVTTL For complete documentation, see the data sheet Product Description The MC100EPT26 is a 1:2 Fanout Differential LVPECL to LVTTL translator. Because LVPECL (Positive ECL) levels are used only +3.3V and ground are required. The small outline 8-lead SOIC package and the 1:2 fanout design of the EPT26 makes it ideal for applications which require the low skew duplication of a signal in a tightly packed PC board. The VBB output allows the EPT26 to be used in a single-ended input mode. In this mode the VBB output is tied to the D0bar input for a non-inverting buffer or the D0 input for an inverting buffer. If used, the VBB pin should be bypassed to ground via a 0.01 uF capacitator. Features • • • • • • • • • • 1.4ns Typical Propagation Delay Maximum Frequency > 275 MHz Typical The 100 Series Contains Temperature Compensation Operating Range: VCC = 3.0 V to 3.6 V with GND = 0 V Open Input Default State Safety Clamp on Inputs 24mA TTL outputs Q Outputs will default LOW with inputs open or at VEE VBB Output Pb-Free Packages are Available For more features, see the data sheet Part Electrical Specifications Product Compliance Status Channels Input Level Output Level VCC Typ (V) fMax Typ (MHz) tpd Typ (ns) tR & tF Max (ps) Package Type MC100EPT26DG Pb-free Active 1 ECL TTL 3.3 350 1.5 950 SOIC-8 Active 1 ECL TTL 3.3 350 1.5 950 SOIC-8 Active 1 ECL TTL 3.3 350 1.5 950 TSSOP-8 Active 1 ECL TTL 3.3 350 1.5 950 TSSOP-8 Active 1 ECL TTL 3.3 350 1.5 950 DFN-8 Halide free MC100EPT26DR2G Pb-free Halide free MC100EPT26DTG Pb-free Halide free MC100EPT26DTR2G Pb-free Halide free MC100EPT26MNR4G Pb-free Halide free For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016